Hampshire · England

Gutter Sealing in Foxcotte

Gutter sealing in Foxcotte from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Gaps along fascia and soffit joints
  • Damp on an inside wall under a dripping gutter
  • Wet patches on the wall under a gutter joint

Book gutter sealing in Foxcotte

Gutter sealing in Foxcotte, done properly

Many dripping gutters are just a failed joint or end cap. We clean out the joint, dry it and reseal it with a sealant made for guttering. If the gutter itself has failed, we say so. We work on gutter end caps, garage door frames and soffit joints, and the jobs we see most are leaking gutter joints and stop ends and internal damp traced to a gutter joint.

Somewhere as small as Foxcotte, homes and farm buildings often face open ground, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.

Whatever the size of the job, you get the same 12-month guarantee in Foxcotte and across Hampshire.

Where
Foxcotte (SP10)
Wider area
Hampshire
Cover
12 months on all our work
Quote
A clear price before we start
Phone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

When something else is needed

Honest advice matters more to us than a booking, so here’s what new sealant will not do:

  • Leaks from the roof rather than a joint
  • Gutters that have dropped or pulled away
  • Blocked downpipes

If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer before booking.

Where we work in Foxcotte

  • Gutter end caps
  • uPVC fascias
  • Roofline trims
  • Soffit joints
  • Gutter joints
  • Garage door frames

Foxcotte buildings and the weather

Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

Letting a property close to Andover station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. Managing a site like Harrow Way Community School? Then its movement joints, gutters and trims need looking after like any other building’s.

Foxcotte is about 2 miles north-west of Andover, in Hampshire. From the centre of Foxcotte to the outskirts, we cover gutter sealing for every kind of property. Across Hampshire, we cover 683 places, Foxcotte among them. There’s also a page for Southampton, about 22 miles away.

Every address in SP10 is within our area for gutter sealing. Other places close to Foxcotte include Charlton (1 mile south-east), Penton Mewsey (1 mile west), Penton Grafton (1 mile west), Penton Corner (1 mile south-west) and Hatherden (2 miles north). Larger places within reach include Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (7 miles west), Weeke (13 miles south-east), Stanmore (14 miles south-east) and Ludgershall (5 miles west).

Local landmarks in Foxcotte

Typical jobs here are in homes near Portway Infant School and White Hart Public House, among other places. For rail, the closest station is Andover station, roughly 1.2 miles south-east of the centre. A little further out are Andover Museum (1.7 miles south-east) and Andover War Memorial Hospital (0.9 miles south-east). Not far away are Mill Lake and Anton Lakes.

Map of Foxcotte © OpenStreetMap contributors

What we are called out for in Foxcotte

Debris in the gutter keeps water sitting at the joints. Water that can’t drain works its way through a weak joint and drips through.

The problems people generally mention when they call include:

  • Internal damp traced to a gutter joint
  • Streaks down the brickwork from a leaking joint
  • Rain getting in around a garage door
  • Stop ends leaking at the end of a run

If you live in an older home near St Thomas, an extension built onto an older house moves differently, and the joint between them takes the strain.

What to look for in a quote

  • Which colour the sealant will be
  • Whether the sealant suits the joint
  • Are they insured?
  • How long to leave it before use

Choosing a sealant specialist

What happens on the day

Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from an hour or two to a few hours. Somewhere as small as Foxcotte, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We look at the gutters, fascias and trims and agree the joints to seal.
  2. Each joint is cleaned and any old sealant removed.
  3. The joints are dried.
  4. We apply exterior or gutter sealant and finish it neatly.
  5. We check our work before we leave.

Preparing for the visit

  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention if the joints have been sealed before
  • Move anything stored near the joints

Getting a quote

Want a quote for gutter sealing? Please phone 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and give you a clear quote before work begins.

Get a quick quote

Related advice

Work for landlords, hotels and businesses

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

How the job changes by surface

Gutter joints

Joints between gutter lengths are the most common leak point. We clean, dry and reseal them.

Roofline trims

Sealing roofline trims is joint work only. A roofer deals with the roof itself.

Keeping the joints in good condition

So the new joints stay in good condition:

  • Deal with a drip before winter
  • Keep the gutters clear of debris
  • Do not lean ladders against the gutter itself
  • Get a dropping gutter looked at quickly

Leave the new sealant to cure as we advise and avoid disturbing it.

The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we’ll tell you.

Why it’s worth doing now in Foxcotte

Sealing over a dirty, wet joint is a quick fix that rarely lasts but it tends to peel off. Cleaning out and drying the joint first is what makes it last. Where a wall is exposed, as many are in small places like Foxcotte, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we will give you an honest view and a quote.

Why Foxcotte customers choose us

  • Neat joints and a tidy finish
  • We never seal over old sealant
  • An ARBOMaster approved applicator
  • A sealant colour to suit the surroundings

Read our cost guide and our reviews.

Common questions in Foxcotte

I let a flat near Andover station. Can you help?

Yes, we work for landlords and agents. You can call 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before any work starts.

Is Foxcotte in your area for gutter sealing?

Yes, Foxcotte is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.

Can you reach high gutters?

It depends on the access. Let us know the height and the ground below when you phone 0345 464 0079 or email us.

Where are you based?

Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.

Does someone need to be in?

We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.

Do you do commercial work?

Yes. Commercial and hotel work is a large part of what we do, as well as homes. We can talk about working times when we quote.

Will the old sealant be removed?

Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.

Will it make a mess?

Not at all. The area is protected while we work and cleaned up afterwards.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job