Kent · England
Gutter, fascia & soffit sealing in Fleeden, Kent
Gutter sealing for Fleeden and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Drips from gutter joints and end caps
- Open joints in fascias and soffits
- Damp patches inside below a leaking gutter
What happens on the day
Before we leave, we go over the finished joints with you. The work normally takes anything from an hour or two to a few hours, depending on how much there is to do. Somewhere like Fleeden needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- The sealant is applied and finished.
- The joints are checked once sealed.
Before we arrive
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
- Let us know about earlier repairs to the joints
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you are ready, ring 0345 464 0079 or drop us an email.
Advice
About our gutter sealing in Fleeden
For gutter sealant to hold, the joint has to be clean and dry. That is why we take out the old sealant and dirt first and the joint is dried before the new sealant goes in. Common call-outs are for wet patches on the wall under a gutter joint and dripping gutter ends, across garage door frames, uPVC fascias and gutter end caps.
Around Fleeden, older buildings can be stone, brick or timber-framed, many with extensions added later. Where one material meets another is where water usually gets in.
You get a one-year guarantee, the same in Fleeden as everywhere else we work.
- Where
- Fleeden (TN26)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Soffit joints
Gaps at soffit joints can let in draughts and insects. We close them with a suitable sealant.
Roofline trims
Roofline trims rely on sealant at their joints. When it splits, water can get behind.
What affects the cost of gutter sealing
Call for a quick quote. What matters most is:
- The number of rooms or windows
- When we can work, for business premises
- The old material and how stubborn it is
- Whether the work is at height
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
Asking for a quote
You don’t need to know the technical terms. Just tell us:
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
- Photos by email, if that’s easy
- Roughly how big the job is
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Gutter sealing in Fleeden: local notes
Historic houses like Godinton House (about 2.2 miles north-east) are a reminder that the area around Fleeden has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material. Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For landlords with property near Pluckley station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. Schools such as John Wallis Academy are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. Godinton House, about 2.2 miles north-east, is one of the historic houses in the wider area around Fleeden, and older homes nearby need a sealant that suits their walls.
Fleeden is about 3 miles west of Ashford, in Kent. Every kind of property in Fleeden is covered for gutter sealing, old or new, large or small. The work is guaranteed for a year. Fleeden is one of 922 towns and villages in Kent where we work. Crawley is on our list too, about 43 miles from Fleeden.
Work in TN26 is quoted and booked the same way as anywhere else. Other places close to Fleeden include Daniel's Water (1 mile north), Chilmington Green (1 mile east), Great Chart (1 mile north-east), Shadoxhurst (2 miles south) and Stanhope (2 miles east). Larger places within reach include Maidstone (15 miles north-west), Ashford (3 miles east), Sittingbourne (15 miles north), Faversham (13 miles north), Hythe (13 miles east) and Davington (13 miles north).
Landmarks near Fleeden
We work in homes and buildings around Ashford Community Woodland. The nearest railway station is Pluckley station, about 2.8 miles north-west. Other landmarks nearby include County Square (3.1 miles east) and William Harvey Hospital (4.9 miles east). The countryside around Fleeden includes Orlestone Forest.
When it is not the sealant
In fairness, some problems need a different trade:
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Guttering that needs replacing
- Boards that have decayed or split
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Where we work in Fleeden
- Gutter joints
- uPVC fascias
- Soffit joints
- Gutter end caps
- Roofline trims
- Garage door frames
Fleeden: your questions answered
Do you work for landlords with property near Pluckley station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.
Do you cover Fleeden for gutter sealing?
Yes, Fleeden is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.
How long does the job take?
It depends on the size of the job, but most jobs take a few hours, depending on the number of joints and the access. We’ll tell you when we quote.
Where is Mr Mastic based?
Our base is Crawley. We work across South East England, London and Scotland.
Is sealing fascia joints something you do?
Yes. We seal the joints, not replace the boards and we will let you know if a board has failed.
How long should I leave it?
Cure times vary by product and the conditions. We tell you how long to leave it before we go.
Is gutter cleaning part of the job?
Only around the joints we seal because the joint must be clean. A full gutter clean is a separate job.
Do the sealants smell?
Possibly a little. It fades as the sealant cures.
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will give you a quote.
Places near Fleeden
More services for Fleeden
Why it’s worth doing now in Fleeden
A bead squeezed onto a wet joint might hold for a while but it tends to peel off. Cleaning out and drying the joint first is what makes it last. Where a wall is exposed, as many are in small places like Fleeden, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why Fleeden customers choose us
- White, clear, grey or coloured to suit, where the product allows
- Sealant colour chosen to suit
- A 12-month guarantee on all work
- Anti-fungal sanitary silicone in wet areas
Read our cost guide and our reviews.
Can I do it myself?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.