Kent · England
Gutter Sealing in Chartham
Problem with your gutter and fascia joints in Chartham? We remove the old material, prepare the joints and seal them properly.
- Leaking gutter joints and stop ends
- Garage door frames letting rain in
- Old sealant on roofline trims that has split
Leave it or put it right?
Leaving a leaking end cap can send water down the wall all winter. Resealing it is a quick job before the damage spreads. Older cottages and farmhouses around Chartham can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- Trusted Arbo and Everbuild sealants
- Any old sealant cut out fully, not covered over
- A sealant colour to suit the surroundings
- We are fully insured
See what affects the cost or our reviews.
Gutter sealing in Chartham, done properly
Failed sealant round a garage door frame lets rain blow in. The frame joint is cut out and resealed using a sealant made for outdoor use. We work on roofline trims, gutter end caps and uPVC fascias, and the jobs we see most are leaking gutter joints and stop ends and internal damp traced to a gutter joint.
Outside joints can only be sealed when they’re dry, so work in Chartham is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.
The work is covered for a year after we finish. If anything isn’t right with it, ring 0345 464 0079 or email us.
- Where
- Chartham (CT4)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Look along the fascias for open joints
- Look at the gutters while it’s raining
- Do not lean ladders against the gutter itself
- Check that water runs out of the downpipes
Keep downpipes clear, so water can get away. Blockages push water back along the gutter.
A leaking garage frame lets water reach stored items. A reseal sorts it.
Towns and villages near Chartham
Also in Chartham
How the visit works
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours, depending on the number of joints and the access. Somewhere as small as Chartham, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we trace the drip and check the gutter is not damaged.
- We remove the old sealant and clean the joint.
- We dry the joint so the new sealant can bond.
- A gutter sealant is applied to the joint.
- We check the run and clear debris near the joints.
Before we arrive
- Mention if the joints have been sealed before
- Let us know about parking restrictions
- Mention any leaks or damp you’ve noticed
How to get a quote
Every job is quoted individually. Just ring 0345 464 0079 or email us with the details and send photos if you have them.
Advice
Common questions in Chartham
Is Chartham in your area for gutter sealing?
Yes. Our work covers London and the South East, and Chartham is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we will give you a clear price.
Can you help a landlord with a rental near Chartham station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Can you work on commercial sites?
Yes. We have worked for hotels, offices and other businesses, and we are fully insured.
Where is Mr Mastic based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Do you replace gutters or fascias?
No, we reseal joints and trims. A gutter installer or roofer deals with replacement.
Do you take out the old sealant first?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
What guarantee comes with the job?
All our work carries a one-year guarantee, and we are fully insured.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
How we quote for gutter sealing
We quote each job individually. This is what makes a difference:
- Whether the work is at height
- The product the joint needs
- The number of rooms or windows
- When we can work, for business premises
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- The type of property
- Photos by email, if that is easy
- What the problem is, such as mould, gaps, leaks or cracking
- Any access issues, like height or stairs
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.
How the job changes by surface
Roofline trims
Roofline trims rely on sealant at their joints. Split sealant lets water in.
Soffit joints
Soffits sit under the eaves, where joints can open up. They’re sealed to tidy the line.
What sealant work cannot fix
New sealant can’t fix everything, and we’d rather say so up front. It will not solve:
- Sagging gutters or broken brackets
- Downpipes that are blocked or broken
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Where we work in Chartham
- Garage door frames
- uPVC fascias
- Gutter joints
- Soffit joints
- Gutter end caps
- Roofline trims
Gutter sealing in Chartham: local notes
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For site and facilities teams at buildings such as Chartham Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. For landlords with property near Chartham station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. If you live in an older home near Church of St Mary, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Chartham is about 3 miles south-west of Canterbury, in Kent. We provide gutter sealing to homes and businesses in Chartham and nearby, as part of our work across Kent. Our Kent coverage runs to 922 places, Chartham among them. Our Chelmsford page covers work nearby, about 40 miles away.
All of CT4 is within our area for gutter sealing, from the main roads to the quietest streets. Whether your property is on Station Road, River Court and The Green or anywhere close by, our applicators can take on the job. Neighbouring places we cover for gutter sealing include Shalmsford Street (1 mile south), Mystole (1 mile south-west), Chartham Hatch (1 mile north), Garlinge Green (2 miles south) and Thanington (2 miles north-east). We also work in nearby towns such as Ashford (10 miles south-west), Canterbury (3 miles north-east), Dover (15 miles south-east), Sittingbourne (14 miles north-west), Folkestone (14 miles south-east) and Whitstable (7 miles north).
Near you in Chartham
In Chartham, that means homes and buildings near No Man's Orchard and The Artichoke Inn. Chartham has its own railway station: Chartham station. A little further out are Chilham Castle (2.7 miles west) and Whitefriars Shopping Centre (3.1 miles north-east). Green spaces nearby include Blean Woods RSPB Reserve.
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.