Orkney Islands · Scotland
Glazing & conservatory sealant in Tenston, Orkney Islands
Our applicators work in Tenston on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.
- A quick top-up bead that didn’t last
- Black or yellowed silicone on glass joints
- Rooflight joints letting water in
How the job changes by surface
Rooflights
Water around a rooflight is not always the sealant. We find the cause first.
Glass-to-glass joints
Frameless glass corners and panels are joined with silicone. We renew it with a clear or matching glazing silicone.
Glazing silicone for homes and businesses in Tenston
Frameless shower screens rely on sealant to keep water in. The joint down the wall and the one along the tray are common leak points, and we reseal both. We work on conservatory frames, glass-to-glass joints and shower screens, and the jobs we see most are mouldy sealant around glass panels and cracked silicone between glass panels.
Mastic can only go onto a dry joint, so outside work in Tenston depends on the weather, and longer journeys are planned in advance. Let us know about access to every frame, including any upstairs.
A 12-month guarantee comes as standard.
- Where
- Tenston (KW16)
- Wider area
- Orkney Islands
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
More services for Tenston
Your questions about glazing silicone in Tenston
Is Tenston in your area for glazing silicone?
Yes. Our work covers the whole of Scotland, and Tenston is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we will send you a clear quote.
Is Tenston within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Just mention lanes, gates or anything else about the route when you book.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply email us at info@mrmastic.co.uk.
What sealant do you use on glazing?
A glazing-grade silicone is best. Ours is a neutral-cure glazing silicone and anti-fungal silicone in wet areas.
Can you quote for more than one area?
Yes. Just list everything you need and you’ll get one quote.
Will it make a mess?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we are done.
How long before the joint can be used?
That depends on the sealant used, so follow the cure time we give you.
Can you match the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before work begins.
How we quote for glazing silicone
There’s no set price list, because no two jobs are the same. What we look at:
- The type of sealant required
- How easy the joints are to reach
- Any mould that needs treating
- How many rooms, windows or areas are involved
What you pay reflects the work, not guesswork. That’s why we ask about the job first and send you a clear quote before any work starts.
Helping us quote
Before you ask for a quote, have a think about:
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
- The rough size of the job
- Whether it has been sealed before
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
What sealant work cannot fix
It helps to know what we can’t do:
- Glass that needs replacing
- A sealed unit that has misted inside
- A frame that needs repairing or replacing
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer.
Surfaces we seal
- Shower screens
- Glass-to-frame joints
- Glass-to-glass joints
- Conservatory frames
- Glass balustrade bases
- Rooflights
Glazing silicone in Tenston: local notes
Tenston is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Historic houses like Skaill House (about 2.8 miles north-west) are a reminder that the area around Tenston has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
Historic houses such as Skaill House, about 2.8 miles north-west, show how far back building around Tenston goes. Around Tenston, as everywhere, glazing silicone is only as good as the preparation behind it.
Tenston is about 12 miles west of Kirkwall, in the Orkney Islands. We provide glazing silicone to homeowners, landlords and businesses in Tenston and nearby, as part of our work across the Orkney Islands. We cover 51 towns and villages across the Orkney Islands, from the larger towns to small villages.
Work in KW16 works the same way as everywhere else we cover. Close by, we work in Wasbister (1 mile south), Russland (2 miles north-east), Hourston (2 miles north-east), Skeabrae (3 miles north) and Harray (3 miles east). If you are somewhere remote, a little more planning is needed.
Local landmarks in Tenston
Other landmarks nearby include Skara Brae Visitor Centre (2.8 miles north-west). For a walk, there’s Mill Dam of Rango and Hill of Miffia.
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Ventilate the conservatory to cut condensation
- Stick to mild cleaners on glass
- Keep scrapers and blades away from the silicone
- Keep conservatory gutters clear of leaves
Keep conservatory gutters clear, so water drains away from the joints. Blocked gutters can push water where it shouldn’t go.
If silicone on glass has cracked, water is already getting in. Renewing it early keeps it simple, compared with repairing damaged frames or plaster.
What we do, step by step
We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. The job generally takes anything from an hour or two to most of a day, depending on the size of the job. Somewhere like Tenston may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We trace the leak and confirm it’s a sealant joint.
- We remove the old sealant carefully.
- We clean the glass and frame so the new silicone bonds.
- We lay the new bead and tool it smooth.
- Each joint is checked and, where possible, water-tested.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Read more
Should I try it myself first?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
Leave it or put it right?
If the problem is a misted unit or a broken panel, sealant will not help. We’ll tell you that rather than seal it anyway and point you to a glazier or roofer. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- 180+ five-star Google reviews
- We never seal over old sealant
- Colour picked to suit the job
- ARBOMaster approved applicator