Orkney Islands · Scotland

Gutter Sealing in Tenston

Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims in Tenston, with a 12-month guarantee on every job. Call for a quick quote.

  • Open joints in fascias and soffits
  • Old sealant on roofline trims that has split
  • Internal damp traced to a gutter joint

Gutter sealing in Tenston

What we can’t put right

We’ll always be straight with you, so here’s what sealant can’t fix:

  • Guttering that needs replacing
  • Sagging gutters or broken brackets
  • Fascias that need replacing

If you’re not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer.

What we seal

  • Gutter joints
  • Roofline trims
  • Gutter end caps
  • Soffit joints
  • Garage door frames
  • uPVC fascias

Gutter sealing for homes and businesses in Tenston

Garage door frames let rain in when the sealant around them fails. We cut out the old sealant and reseal the frame using a sealant made for outdoor use. We work on gutter joints, soffit joints and garage door frames, and the jobs we see most are rain getting in around a garage door and old sealant on roofline trims that has split.

External sealant needs dry surfaces, so outdoor work around Tenston is planned around the weather. Let us know about access to every wall and roofline.

All of our work is guaranteed for twelve months, in Tenston and everywhere else we cover.

Place
Tenston (KW16)
Region
Orkney Islands
Guarantee
12 months on all our work
Quote
A clear price before work begins
Email
info@mrmastic.co.uk
Page updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

Looking after it afterwards

So the new joints stay in good condition:

  • Keep an eye out for wet patches below a joint
  • Don’t leave a sagging gutter
  • Look at the gutters while it’s raining
  • Make sure downpipes aren’t blocked

Keep the gutters clear of leaves and moss, so water drains away past the joints. Water left in a gutter tests every joint.

The sooner a gutter leak is sealed, the less water reaches the wall. If we find a bigger problem, we’ll tell you.

Walls and rooflines in Tenston

Tenston is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Island weather, with its wind and salt spray, is tough on gutter, fascia and roofline joints.

Historic houses such as Skaill House, about 2.8 miles north-west, show how far back building around Tenston goes, and older homes nearby need a sealant that suits their walls.

Tenston is about 12 miles west of Kirkwall, in the Orkney Islands. Across the KW16 area, our applicators can take on gutter sealing. 51 places in the Orkney Islands are on our list.

Here we cover the KW16 postcode area for gutter sealing. Close by, we work in Wasbister (1 mile south), Russland (2 miles north-east), Hourston (2 miles north-east), Skeabrae (3 miles north) and Harray (3 miles east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.

Local landmarks in Tenston

Well-known places in the area include Skara Brae Visitor Centre (2.8 miles north-west). Open spaces near Tenston include Mill Dam of Rango and Hill of Miffia.

Map of Tenston © OpenStreetMap contributors

FAQs for Tenston

Is Tenston in your area for gutter sealing?

Yes, Tenston is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing.

Is Tenston within the area you cover?

Yes. Tenston is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Just mention lanes, gates or anything else about the route when you book.

What guarantee comes with the job?

Our 12-month guarantee applies on every job.

Can I do it myself?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.

What does gutter sealing cost?

It depends on the job, so we quote each one individually. For a quick quote, email us at info@mrmastic.co.uk and let us know what needs doing and where.

Can you seal fascia and soffit joints?

Yes, it’s a common job. Each joint is cleaned and sealed with a suitable exterior sealant.

Can new sealant go over the old?

No, it won’t last. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.

Do I need to be at home?

It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.

What affects the quote in Tenston

The price is agreed before any work begins. It’s based on:

  • Whether the work is at height
  • How much old sealant there is and how hard it is to remove
  • The number of rooms or windows
  • How much there is to do

There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.

Helping us quote

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • Access, such as stairs, a lift or height
  • Whether it’s a home or a business
  • Pictures of the joints, sent by email
  • If someone has resealed it before

If you’re in Tenston and need gutter sealing, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and you will get a clear quote before any work starts.

What happens if it’s left?

New gutters cost far more than a few resealed joints. Where the gutter is in good order and only a joint leaks a reseal is all it needs. If it has failed, we’ll tell you. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.

Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.

Why us?

  • Sanitary silicone with an anti-fungal additive in wet areas
  • More than 20 years in sealant work
  • Sealant colour chosen to suit
  • Homes, businesses and hotels

Read our cost guide and our reviews.

Common problems we fix in Tenston

A sealant applied to a damp or dirty joint won’t bond. Rushed repairs often do not last long.

Signs it’s time to call us include:

  • Water running down the wall below the gutter
  • Water dripping where gutter sections meet
  • Failed sealant on a garage door frame
  • Old gutter sealant that has let go

Around Tenston, as everywhere, gutter sealing is only as good as the preparation behind it.

Before booking anyone

  • How much experience the applicator has
  • Are they insured?
  • What the cure time is
  • What product goes in the joint

Choosing a sealant specialist

What we do, step by step

At the end, we look at the finished work together and tell you how long to leave it. The work normally takes an hour or two for a few joints, longer for a full run, depending on how much there is to do. Somewhere like Tenston may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.

  1. We find where the water is coming from and check the gutter is sound.
  2. We remove the old sealant and clean the joint.
  3. The joint is dried before sealing.
  4. We seal the joint with a sealant made for gutters.
  5. We check the run and clear debris near the joints.

How to prepare

  • Let us know about parking restrictions
  • Mention any tricky access
  • Try not to wet indoor joints just before the visit

Get a quote

There’s no standard price list. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.

Get a price

Advice

DIY versus a professional finish

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job