Orkney Islands · Scotland
Hourston Gutter Sealing
We cover Hourston for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly.
- Wet patches on the wall under a gutter joint
- Garage door frames letting rain in
- Old sealant on roofline trims that has split
Honest limits
In fairness, some problems need a different trade:
- Gutters that have dropped or pulled away
- Guttering that needs replacing
- Leaks from the roof rather than a joint
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly before booking.
Surfaces we seal
- Gutter end caps
- Garage door frames
- uPVC fascias
- Roofline trims
- Gutter joints
- Soffit joints
About our gutter sealing in Hourston
It’s easy to live with a dripping gutter joint, but each shower sends water to the same place. Resealing it is a small job while the gutter is still sound. We work on uPVC fascias, gutter joints and soffit joints, and common reasons people get in touch are stop ends leaking at the end of a run and gaps along fascia and soffit joints.
In and around a place like Hourston, many buildings face open ground and take the full weather. Gutter joints and wall joints take a battering.
Our work is backed for twelve months.
- Location
- Hourston (KW17)
- Region
- Orkney Islands
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Can I do it myself?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Work for landlords, hotels and businesses
If you manage several properties in or around Hourston, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Don’t leave a sagging gutter
- Check that water runs out of the downpipes
- Watch the wall under the gutters for staining
- Sort out a dripping joint early
Look at fascia and trim joints when you’re checking the gutters. A small split is quicker to put right.
Once roofline sealant splits, water can get behind it. Resealing early protects the boards.
What else we do in Hourston
Hourston buildings and the weather
Hourston is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Island weather, with its wind and salt spray, is tough on gutter, fascia and roofline joints.
Historic houses such as Skaill House, about 4.1 miles west, show how far back building around Hourston goes, and older homes nearby need a sealant that suits their walls. In and around Hourston, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Hourston is about 11 miles north-west of Kirkwall, in the Orkney Islands. Homes, rented property, offices and hotels in Hourston can book us for gutter sealing, old or new, large or small. Every job comes with our 12-month guarantee. Hourston is one of 51 towns and villages in the Orkney Islands where we work.
Our applicators cover all of the KW17 postcode area for gutter sealing and the streets around it. Neighbouring places we cover for gutter sealing include Russland (1 mile south), Dounby (1 mile north), Harray (2 miles south-east), Skeabrae (2 miles north-west) and Tenston (2 miles south-west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Hourston
Nearby you’ll also find Corrigall Farm Museum (1.5 miles east). For a walk, there’s Loch of Bosquoy and Kame of Corrigall.
Why act early in Hourston
You do not need new fascias just because the joints have opened. A neat seal closes the gaps as long as the boards are in good condition. Around Hourston, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first.
Why book with us
- Fully insured
- Homes, businesses and hotels
- An ARBOMaster approved applicator
- Trusted Arbo and Everbuild sealants
See our cost guide or what customers say.
What the job involves on each surface
Roofline trims
Trim joints are cut out and resealed suited to the material.
Gutter end caps
End caps take the pressure of water running along the gutter. A failed seal makes them leak.
Your questions about gutter sealing in Hourston
Is gutter sealing in a coastal place like Hourston any different?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are generally the first to need attention.
Do you cover Hourston for gutter sealing?
Yes, Hourston is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing.
Can I add another job to the visit?
Yes. Just list everything you need and you’ll get one quote.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
How long does the job take?
That depends on the amount of work, but most jobs take anything from an hour or two to a few hours. We will tell you when we quote.
Can you fit new guttering?
We don’t replace gutters or fascias. We will tell you if the gutter needs replacing so you can call the right trade.
How the visit works
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes an hour or two for a few joints, longer for a full run. For a place like Hourston, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We find where the water is coming from and check the gutter is sound.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
Preparing for the visit
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
- Mention any tricky access
How to get a quote
Want a quote for gutter sealing? Please email us at info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and send you a clear quote before we start.