Hampshire · England
Ovington Glazing Silicone
Glazing silicone for Ovington and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Water getting into a conservatory at the joints
- Black or yellowed silicone on glass joints
- New silicone smeared over old sealant
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Ventilate the conservatory to cut condensation
- Get a new leak looked at quickly
- Keep harsh solvents off the silicone
- Check the gutters above the glazing for debris
Clear the conservatory gutters regularly so water doesn’t back up against the seals. Overflowing gutters can cause leaks of their own.
Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below long before you see it.
Glazing silicone in Ovington, done properly
Glazing silicone that has yellowed, blackened or come away spoils the look and lets water in. We remove it without scratching the glass or frame and reseal the joint. We work on glass-to-glass joints, glass balustrade bases and conservatory frames, and the jobs we see most are leaks where conservatory glass meets the frame and failed joints on frameless glass.
Somewhere as small as Ovington, older homes often have timber frames set in stone or brickwork. Older buildings like these don’t always suit modern silicone, and sometimes a traditional sand mastic is the better choice.
Every job is covered by our 12-month guarantee.
- Where
- Ovington (SO24)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What glazing silicone looks like in Ovington
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Hinton Ampner House (about 3.4 miles south-east) are a reminder that the area around Ovington has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic.
Schools such as Perins School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.
Ovington is about 5 miles east of Hyde, in Hampshire. If you need glazing silicone in Ovington, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Hampshire. Across Hampshire, we cover 683 places, Ovington among them. Our Southampton page covers work nearby, about 14 miles away.
Jobs for glazing silicone in SO24 works the same way as everywhere else we cover. Other places close to Ovington include Itchen Stoke (1 mile north-west), Itchen Abbas (2 miles north-west), Temple Valley (2 miles south-west), Martyr Worthy (2 miles west) and Easton (3 miles west). We also work in nearby towns such as Basingstoke (13 miles north), Winchester (5 miles west), Eastleigh (10 miles south-west), Andover (15 miles north-west), Horndean (15 miles south-east) and Chandler's Ford (11 miles south-west).
What’s near Ovington
Locally, jobs take us to homes and businesses close to The Bush Inn and the streets around them. Nearby you will also find Wolvesey Castle (5 miles west) and St John's Rooms And Chapel (4.9 miles west). Green spaces nearby include Winnall Moors and Twyford Down.
Questions from Ovington
Can you do glazing silicone in Ovington?
Yes, Ovington is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Will you come out to Ovington?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
How long before the joint can be used?
It depends on the product and the temperature. We tell you how long to leave it before we go.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Can you just put new silicone over the old?
Topping up is a common cause of leaks. A proper job means cutting out, cleaning and resealing.
Can landlords and businesses book you?
Yes, often. Several properties can go on one quote, and between tenancies is a good time for the work.
Quotes for glazing silicone in Ovington
Your quote is based on your job. We look at:
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
- Working hours on commercial sites
- The product the joint needs
Doing several joints on one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll send you a clear quote for the lot.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- A few photos by email, if you can
- Whether it’s a home or a business
- If someone has resealed it before
- The address or postcode of the job
Want a quote for glazing silicone? Please call 0345 464 0079 or email us with a few details. We will explain what we’d do and give you a clear quote before any work starts.
What we cannot put right
We’ll always be straight with you, so here’s what sealant can’t fix:
- A broken pane or roof panel
- A frame that needs repairing or replacing
- A roof that has moved or dropped
If you’re not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer before you book.
Where we work in Ovington
- Glass-to-glass joints
- Glass balustrade bases
- Glass-to-frame joints
- Conservatory frames
- Rooflights
- Shower screens
Nearby places to Ovington
More services for Ovington
Landlord and commercial work in Ovington
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
What happens on the day
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and tidy away. It generally takes a few hours, depending on how many joints need doing. Somewhere like Ovington needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we agree the joints to be done.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- The joints are checked before we leave.
How to prepare
- Let us know about stairs, lifts or work at height
- Plan for the work area to be out of bounds to pets and children
- Clear the area around the work
Ask for a quote
If you’re in Ovington and need glazing silicone, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Read more
Do you need glazing silicone in Ovington?
Sealant laid over old sealant does not last. Plenty of leaks come from a quick top-up over the old bead leaving a path for water.
People normally contact us after spotting something like this:
- Water tracking down the inner face of the glass
- Water escaping where a screen meets the wall
- New silicone smeared over old sealant
- Leaks where conservatory glass meets the frame
For an older house near a landmark such as Church of St Peter, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
What to look for in a quote
- How hidden problems are handled
- Are they insured?
- The length of the guarantee
- How the surfaces are prepared before sealing
What the job involves on each surface
Glass-to-glass joints
These joints are on show, so we take care to leave a neat bead.
Shower screens
Mouldy or lifting sealant on a screen leaks. A full reseal sorts it.