Orkney Islands · Scotland
Glazing & conservatory sealant in Orphir, Orkney Islands
Professional glazing silicone in and around Orphir, with every bit of old sealant taken out first and a one-year guarantee.
- Water running down inside the glass
- A quick top-up bead that didn’t last
- Conservatory leaks at frame and glazing joints
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
About our glazing silicone in Orphir
Cracked, stained or lifting silicone on glass looks poor and can leak. It comes off cleanly, without marking the glass before the new bead goes in. We’re often asked to deal with glazing silicone that has cracked or come away and a quick top-up bead that didn’t last, across conservatory frames, shower screens and glass-to-frame joints.
Mastic can only go onto a dry joint, so outside work in Orphir depends on the weather, and longer journeys are planned in advance. Let us know about access to every frame, including any upstairs.
Big or small, you get the same 12-month guarantee.
- Place
- Orphir (KW17)
- Wider area
- Orkney Islands
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What else we do in Orphir
Leave it or put it right?
Resealing cannot fix a failed unit or a cracked panel. We say so plainly, so you can call the right trade. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Leaving a failed joint generally makes the job bigger, not smaller. If you are not sure whether it needs doing, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
What you get with us
- Full insurance on every job
- Colour agreed with you before work begins
- Old sealant always removed completely
- 4.9 on Google from 180+ five-star reviews
See our cost guide and our reviews.
Different surfaces, different methods
Glass-to-frame joints
Old sealant is removed carefully from the glass and reseal with glazing silicone.
Conservatory frames
Conservatory frame joints are a common source of leaks. We cut out the old sealant and reseal.
How we quote for glazing silicone
Your quote is based on your job. We take into account:
- Mould in or behind the old joints
- The number of rooms or windows
- When we can work, for business premises
- The size of the job
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll explain what it covers.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Whether it’s a home or a business
- Any previous sealing or DIY work
- A few photos by email, if you can
- The rough size of the job
We do not publish a price list. Instead, we give you a clear price for your job. To arrange one, email us at info@mrmastic.co.uk.
Common questions in Orphir
Is glazing silicone in a coastal place like Orphir any different?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Will you come out to Orphir?
Yes, we do. We work across all of Scotland, islands included, from towns to the smallest places. Longer journeys are simply planned in advance.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Is the work guaranteed?
Every job comes with our one-year guarantee.
Can I choose the sealant colour?
Most of the time, yes. We will explain which colours are available.
Should I try DIY first?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
How long will you be here?
Most jobs take a few hours for most jobs, including preparation and clearing up. Your quote will say how long we expect yours to take.
Do you do commercial work?
Yes, regularly. Larger jobs can be planned room by room or area by area to suit the site.
What we’re called out for in Orphir
Shower screen silicone gets wet every day. Mould grows into the bead and the joint starts to lift.
If you can see any of these, it’s time to have the joints looked at:
- A quick top-up bead that didn’t last
- Failed joints on frameless glass
- Leaks where conservatory glass meets the frame
- Leaking glazing joints on a rooflight
For jobs in and around Orphir, choosing the right material for each joint is as important as a tidy finish.
Before you book anyone
- Whether you can choose the colour
- Whether they seal over old material or remove it
- How hidden problems are handled
- What product goes in the joint
Orphir homes and the weather
Orphir is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. On the islands, wind and salt spray are hard on outside sealant.
Around Orphir, as everywhere, glazing silicone is only as good as the preparation behind it.
Orphir is about 7 miles south-west of Kirkwall, in the Orkney Islands. We carry out glazing silicone for householders, landlords and businesses in Orphir, as part of our work across the Orkney Islands. We cover 51 towns and villages across the Orkney Islands, from the larger towns to small villages.
All of KW17 is covered for glazing silicone, from the main roads to the quietest streets. Streets in the area include Kirk Park and Kingfisher Road, and we cover them all. We also cover the places around Orphir: Midland (1 mile south-west), Kirbister (2 miles north-east), Clestrain (2 miles west), Germiston (3 miles north) and Stenness (4 miles north-west). If you are somewhere remote, the job takes a little more planning.
Near you in Orphir
Green spaces nearby include Loch of Kirbister and Ward Hill.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Frames that have decayed or split
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- A roof that has moved or dropped
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.
Joints and surfaces we work on
- Glass balustrade bases
- Conservatory frames
- Shower screens
- Rooflights
- Glass-to-glass joints
- Glass-to-frame joints
What we do, step by step
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes anything from an hour or two to most of a day, depending on the size of the job. Outdoor work around Orphir depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We look at the glazing and agree which joints need resealing.
- We cut away the failed silicone.
- We clean and prepare the joint.
- New glazing silicone goes in and is finished neatly.
- We inspect the work and test it where we can.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Clear items away from the joints we are working on
- Keep children and pets away from the work area
Getting a quote
Want a quote for glazing silicone? Please send an email to info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and give you a clear price before work begins.