Greater London · England
Glazing Silicone in Moor Park
Glazing silicone across Moor Park and nearby, with old sealant always removed completely and a 12-month guarantee.
- Silicone pulling away from the glass
- Water getting into a conservatory at the joints
- Leaks from the base of a shower screen
Glazing silicone in Moor Park
We don’t replace glass and a misted double-glazed unit needs a glazier. Our work is the sealant joints, which is where many leaks start. If you are dealing with water escaping where a screen meets the wall and glazing silicone that has cracked or come away, we can put it right, on glass-to-frame joints, glass balustrade bases and rooflights alike.
Many London homes are flats, with windows high above the street. In a converted house or block, the lease generally says who is responsible for the windows, so it’s worth checking before booking.
You are covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Where
- Moor Park (HA6, WD3)
- Region
- Greater London
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Questions from Moor Park
Is Moor Park in your area for glazing silicone?
Yes. Our work covers London and the South East, and Moor Park is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing.
Can parking be tricky for a visit in Moor Park?
In much of London, parking needs planning: a visitor permit or a bay close to the door helps a lot.
How do I get a quote for glazing silicone in Moor Park?
Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or send us an email with a short description of the job.
Can you reseal a frameless shower screen?
Yes. The old bead comes off without marking the glass, and the joints are cleaned and resealed.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Frames and glazing around Moor Park
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Headstone Manor (about 3.9 miles south-east) are a reminder that the area around Moor Park has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
If you live in an older home near Holy Trinity Church, the joint between an old wall and a newer frame is normally the first place rain gets in. If you let a flat or house near Rickmansworth station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Moor Park is about 2 miles south-east of Rickmansworth, in Greater London. We carry out glazing silicone for householders, landlords and businesses in Moor Park, as part of our work across Greater London. 764 places in Greater London are on our list. We also work in London, about 17 miles from Moor Park.
Work in HA6 and WD3 is quoted and booked the same way as anywhere else. Whether your property is on Bedford Road, Ormonde Road and Russell Road or a nearby road, we can help. We also cover the places around Moor Park: Batchworth Heath (1 mile west), Northwood (1 mile south-east), Eastbury (1 mile east), Batchworth (1 mile west) and Woodcock Hill (2 miles west). Further out, we also cover City of Westminster (14 miles south-east), Marylebone (14 miles south-east), Kensington (13 miles south-east), St Pancras (15 miles south-east), Hampstead (12 miles south-east) and Ruislip (3 miles south).
What’s near Moor Park
Around Moor Park, our work takes us to homes and buildings near Eastbury Farm Primary School, Rickmansworth School and King George V Playing Fields. For rail, the closest station is Rickmansworth station, roughly 2.1 miles north-west. Nearby you will also find Mount Vernon Hospital (0.7 miles south-west) and Hilfield Castle (4.7 miles north-east). Green spaces nearby include Dews Farm Sand Pits and Tumbling Bay.
Signs you need glazing silicone in Moor Park
Sealant laid over old sealant does not last. Many failed joints we see have been topped up rather than cut out leaving a path for water.
Keep an eye out for these signs:
- Leaks from the base of a shower screen
- Water tracking down the inner face of the glass
- Glass-to-glass joints that have split
- Split or lifting silicone on glass
Managing a site like St Martins School Northwood? Then its window and door frames need their mastic kept sound, just like a home’s.
Questions to ask before you book
- Is the old sealant removed completely?
- How the surfaces are prepared before sealing
- The length of the guarantee
- Whether they’re fully insured
How it works
At the end, we look at the finished work together. The work normally takes a few hours, depending on how many joints need doing, depending on the size of the job. In Moor Park, as in most of London, parking needs a little planning. A visitor permit or a nearby bay makes the visit run more smoothly.
- First, we check where the water gets in.
- We remove the old sealant carefully.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- We check the finished joints and test with water where it’s safe.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.
Read more
Aftercare tips
A little care helps the new joints last. We recommend:
- Ventilate the conservatory to cut condensation
- Stick to mild cleaners on glass
- Look over the glazing joints once a year
- Check the gutters above the glazing for debris
Avoid scraping near the new silicone when cleaning the glass. Stick to a soft cloth.
Cracked glazing silicone means the joint has failed. Resealing now is a small job, compared with repairing damaged frames or plaster.
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Surface by surface
Conservatory frames
The joints where the conservatory meets the house take a lot of movement. They’re resealed with a suitable sealant.
Rooflights
Rooflight leaks can come from the sealant or the roof. We check which it is.
How we quote for glazing silicone
Every job gets its own quote. This is what makes a difference:
- Working hours on commercial sites
- Whether the work is at height
- Any mould that needs treating
- The size of the job
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What we need to know
To make quoting easier, please include:
- A few pictures by email, if you can
- The problem you’ve noticed
- How many joints, rooms or windows are involved
- If someone has resealed it before
For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. We will give you a clear quote before any work starts.
Towns and villages near Moor Park
What else we do in Moor Park
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.