Highland · Scotland
Glazing Silicone in Lonemore
Specialist glazing silicone for Lonemore: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Silicone pulling away from the glass
- Rooflight joints letting water in
- Leaks from the base of a shower screen
How we handle glazing silicone in Lonemore
Frameless shower screens rely on sealant to keep water in. Leaks normally come from the wall joint or the tray joint and both get fresh anti-fungal silicone. If you have new silicone smeared over old sealant and split or lifting silicone on glass, we can help, whatever the surface.
Outdoor sealant needs a dry surface, so window work around Lonemore is planned around the weather, and longer journeys are planned in advance. Tell us about access to all the windows and doors, upstairs included.
Our work is backed for twelve months, in Lonemore and everywhere else we cover.
- Place
- Lonemore (IV21)
- Wider area
- Highland
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
If you manage several properties in or around Lonemore, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
What we cannot put right
We will not take on work that won’t last, so here’s what sealant cannot put right:
- Frames that have decayed or split
- Condensation trapped between two panes
- Glass that needs replacing
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Lonemore
- Shower screens
- Conservatory frames
- Glass-to-glass joints
- Glass-to-frame joints
- Rooflights
- Glass balustrade bases
Questions from Lonemore
Is Lonemore in your area for glazing silicone?
Yes, Lonemore is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Lonemore?
Yes. Lonemore is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do the sealants smell?
Some sealants have a smell while they cure, but it fades. Opening a window helps.
What guarantee do I get?
Every job comes with our one-year guarantee.
Is balustrade sealant something you do?
Yes, we reseal the joint at the base channel. Fitting glass is a separate trade.
Can you just put new silicone over the old?
A top-up rarely holds. The new bead can’t grip the old one so we take it all out and start clean.
How long before the joint can be used?
Cure times vary by product and the temperature. We tell you how long to leave it before we go.
Will you leave a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
What happens if it’s left?
You don’t need new glazing because the sealant has gone. Sound glass and frames normally just need resealing. Around Lonemore, water from a failed joint in an older stone home can soak into timber and plaster.
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we will give you an honest view and a quote.
What you get with us
- White, clear, grey or coloured to suit, where the product allows
- We leave the area clean and tidy
- Old sealant always removed completely
- Anti-fungal silicone where joints get wet
Glazing silicone in Lonemore: local notes
Lonemore is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on glazing joints and frame seals, especially on the side facing the sea. The west of Scotland is wetter than the east, which means glazing joints and frame seals has to cope with a lot of rain.
In and around Lonemore, as anywhere, good glazing silicone starts with a clean, dry, properly prepared joint. Managing a site like Gairloch High School? Then the mastic around its windows and doors needs looking after like any other building’s.
Lonemore is in Highland. We carry out glazing silicone for homes and businesses in Lonemore and nearby. We cover 253 towns and villages across Highland, large and small.
Here we cover the IV21 postcode area for glazing silicone. We also cover Gairloch (1 mile east), Badachro (2 miles south), Poolewe (5 miles north-east), Inverasdale (6 miles north) and Àird (9 miles north-east). Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Near you in Lonemore
In Lonemore, that means homes and buildings near Gairloch School and the streets around them. Well-known places in the area include Gairloch Museum (1 mile east). For a walk, there’s Linne a' Mhuilinn and Cnoc Dubh.
What the job involves on each surface
Glass-to-glass joints
These joints are on show, so we take care to leave a neat bead.
Conservatory frames
Frame joints face sun and rain all year. Renewed sealant keeps water out.
More services for Lonemore
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
What affects the cost of glazing silicone
Your quote is based on your job. We look at:
- Any working-time requirements on site
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
- Whether old sealant or filler has to be cut out
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please drop us a line at info@mrmastic.co.uk and we’ll talk you through it.
What we need to know
There’s no need for technical detail. Just tell us:
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
- Any previous sealing or DIY work
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, email us at info@mrmastic.co.uk.
How it works
We bring everything the job needs with us. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes anything from an hour or two to most of a day, depending on the size of the job. Somewhere like Lonemore may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We find where water is getting in and check whether it’s a sealant joint.
- The old sealant is removed from the glass and frame without scratching them.
- We clean the joint with a solvent that suits the glass and frame.
- Glazing silicone suited to the joint is applied and tooled.
- The finished joints are checked and, where it’s safe, tested with water.
Before we arrive
- Keep children and pets away from the work area
- Tell us if parking is tricky
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved.