Argyll and Bute · Scotland

Innellan Glazing Silicone

Our applicators work in Innellan on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.

  • Water tracking down the inner face of the glass
  • Cracked silicone between glass panels
  • Leaks from the base of a shower screen

Trusted glazing silicone in Innellan

Glazing silicone for homes and businesses in Innellan

Glazing silicone that has yellowed, blackened or come away looks poor and can leak. We remove it without scratching the glass or frame before the new bead goes in. If you have rooflight joints letting water in and silicone pulling away from the glass, we can help.

Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Wind-driven rain finds any gap around a frame or sill, so the mastic there works hard.

You’re covered for a year from the day we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Place
Innellan (PA23)
Region
Argyll and Bute
Guarantee
A year, on every job
Price
A clear price before we start
Email
info@mrmastic.co.uk
Updated
26 October 2026

Can I do it myself?

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

What we do, step by step

We keep the work tidy and contained to the area we’re working on, so you can get on with your day. The job normally takes a few hours for most jobs, and we explain the cure time before we leave. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.

  1. We start by finding the leak and making sure sealant is the cause.
  2. Old silicone is cut away from the glass and frame without scratching either.
  3. We clean the joint with a solvent that suits the glass and frame.
  4. We apply a neutral-cure glazing silicone and tool it smooth.
  5. We look over every joint and, where we can, test it with water.

Getting ready for the visit

  • Clear the area around the work
  • Keep children and pets away from the work area
  • Mention any parking rules near the property

How to get a quote

For glazing silicone in Innellan, email us at info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.

Get a price

Advice

Why deal with it now?

You don’t need new glazing because the sealant has gone. Sound glass and frames generally just need resealing, and we will tell you if that is not the case. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.

Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.

Why Innellan clients choose us

  • Old sealant always removed completely
  • 180+ five-star Google reviews
  • Sealant colour chosen to suit
  • An ARBOMaster approved applicator

Read our cost guide and our reviews.

Landlord and commercial work in Innellan

For anyone letting property in or around Innellan, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.

In hotels, rooms out of use cost money, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.

Keeping the joints in good condition

To keep the joints looking good and working properly:

  • Clear the conservatory gutters regularly
  • Use gentle products around the joints
  • Open vents or windows to let moisture out
  • Do not use a blade near the sealant

Follow the cure time we give you before the joints get wet so the silicone can set properly. After that, clean glass with a mild cleaner.

Act on black or lifting silicone early. Once it starts to peel, water gets behind it and the leak gets worse.

Signs you need glazing silicone in Innellan

The wrong sealant is a common cause. Not every silicone sticks properly to glass, and acetoxy types can attack some frame materials.

The most common problems we see are:

  • Water getting into a conservatory at the joints
  • Drips on the inside of a conservatory window
  • Failed joints on frameless glass
  • Glazing silicone that has cracked or come away

Historic houses such as Castle Toward, about 2.4 miles south-west, show how far back building around Innellan goes, and older homes nearby need a sealant that suits their walls.

What to look for in a quote

  • How long the guarantee is
  • Whether VAT is included
  • What happens if the job turns out different
  • When the joint can take water or movement

How to choose a mastic man

Windows and doors in Innellan

Innellan is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on glazing joints and frame seals, especially on the side facing the sea. Historic houses like Castle Toward (about 2.4 miles south-west) are a reminder that the area around Innellan has older buildings as well as new. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.

For landlords with property near Wemyss Bay station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.

Innellan is about 8 miles south-west of Greenock, in Argyll and Bute. Homes, rented property, offices and hotels in Innellan can book us for glazing silicone. The work is guaranteed for a year. Our Argyll and Bute coverage runs to 118 places, Innellan among them. There’s also a page for Glasgow, about 27 miles away.

We work across the PA23 postcode area for glazing silicone. If you need glazing silicone at a property on Newton Road, Shore Road and Wyndham Road or a nearby road, our applicators can take on the job. Other places close to Innellan include Toward (1 mile south-west), Wemyss Bay (3 miles east), Bullwood (3 miles north), Skelmorlie (3 miles south-east) and Inverkip (4 miles east). Further out, we also cover Helensburgh (12 miles north-east), Dunoon (5 miles north), Rothesay (5 miles south-west), Rhu (11 miles north-east), Garelochhead (14 miles north) and Port Bannatyne (5 miles south-west). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.

Local landmarks in Innellan

The nearest railway station is Wemyss Bay station, about 3 miles east of the centre. Well-known places in the area include Cowal Community Hospital (5 miles north) and Knockamillie Castle (0.6 miles north-east).

Map of Innellan © OpenStreetMap contributors

Innellan questions

Does the coastal weather in Innellan affect outside sealant?

Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are normally the first to need attention.

Can you help a landlord with a rental near Wemyss Bay station?

Yes, rental work is part of what we do. You can email us at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before work begins.

Will the old sealant be removed?

Yes, every time. New sealant will not bond properly to old, so the joint is cleaned back first.

Do you reseal glass shower screens?

We can. We remove the old silicone carefully before cleaning and resealing.

Should I try DIY first?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

What do you put in the joint?

It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.

Will there be a smell?

Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.

Can you reseal the base of a glass balustrade?

We can. We cut out the failed sealant and reseal the base joint with a suitable product.

When it isn’t the sealant

We will always be straight with you, so here’s what new sealant won’t do:

  • A sagging or failing conservatory roof
  • Misting between the panes of a double-glazed unit (a failed unit for a glazier)
  • Failed flashing around a conservatory

Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before you book.

Where we work in Innellan

  • Glass balustrade bases
  • Rooflights
  • Glass-to-glass joints
  • Glass-to-frame joints
  • Conservatory frames
  • Shower screens
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job