Isle of Wight · England

Glazing Silicone in Gunville

We cover Gunville for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.

Silicone pulling away from the glass
Failed sealant around rooflight glass
Mouldy sealant around glass panels

Need glazing silicone in Gunville?

Call 0345 464 0079

Get a quick quote

Glazing silicone in Gunville, done properly

Cracked, stained or lifting silicone on glass looks poor and can leak. We remove it without scratching the glass or frame before the new bead goes in. If you have sealant that was laid over old silicone and failed and black or yellowed silicone on glass joints, we can put it right, on rooflights, shower screens and glass balustrade bases alike.

In a village or hamlet like Gunville, older cottages and farmhouses often have timber windows set in stone or brick. Older buildings like these don’t always suit modern silicone, and sometimes a traditional sand mastic is the better choice.

There’s a 12-month guarantee on every job, whatever its size.

Fresh white silicone going into the corner where a shower screen meets the tiled wall

Place: Gunville (PO30)
Wider area: Isle of Wight
Guarantee: One year on every job
Quotes: Quoted before any work starts
Phone: 0345 464 0079
Page updated: 26 October 2026

Frames and glazing around Gunville

Historic houses like Carisbrooke Castle (about 0.8 miles south-east) are a reminder that the area around Gunville has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

Homes close to St. Mary's Church include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.

Gunville is about 1 mile west of Newport, in the Isle of Wight. Jobs in Gunville get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Gunville is one of 125 towns and villages in the Isle of Wight we cover for glazing silicone. For nearby work, see our Portsmouth page, about 13 miles away.

We cover every part of the PO30 postcode area for glazing silicone. Whether your property is on Ash Lane, Purdy Road and Gunville Road or anywhere close by, we can help. We also cover Carisbrooke (1 mile south), Clatterford (1 mile south), Plaish (1 mile south), Bowcombe (1 mile south-west) and Gatcombe (2 miles south). We also work in nearby towns such as Ryde (7 miles east), Cowes (4 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (4 miles north-east). For island and remote addresses, a little more planning is needed, so let us know when you get in touch.

Landmarks near Gunville

We work in homes and buildings around Seaclose Park, Carisbrooke Church of England Controlled Primary School and The Waverley pub and the streets around them. Other landmarks nearby include St Mary's Hospital (1.2 miles north-east) and Carisbrooke Castle (0.8 miles south-east). Not far away are Briddlesford Nature Reserve and Mill Hill.

Map of Gunville © OpenStreetMap contributors

Also near Gunville

More services for Gunville

Elsewhere in the Isle of Wight

Glazing Silicone in every one of the 125 places in the Isle of Wight
All services in the Isle of Wight
Areas we cover
About glazing & conservatory sealant

What affects the quote in Gunville

We do not publish a price list. The quote depends on:

How easy the joints are to reach
The number and length of the joints
Any working-time requirements on site
The number of rooms or windows

Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.

Asking for a quote

To help us quote quickly, let us know:

What’s wrong with the joints now
Where the property is
A few pictures by email, if you can
Any access issues, like height or stairs

For glazing silicone in Gunville, call 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before any work starts.

What the job involves on each surface

Rooflights

Rooflight leaks can come from the sealant or the roof. We find the cause first.

Shower screens

Silicone holds the water in on frameless screens. We reseal without scratching the glass.

Aftercare tips

So the new joints stay in good condition:

Don’t leave a drip for the next storm
Squeegee the shower screen after each use
Clear the conservatory gutters regularly
Look over the glazing joints once a year

Avoid scraping near the new silicone when you clean. Stick to a soft cloth.

Conservatory leaks rarely stay small. Water runs along frames and down walls so it’s best dealt with right away.

Should I try it myself first?

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.

Work for landlords, hotels and businesses

We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.

We work for landlords and agents as well as householders. Sealant work between tenants keeps a property looking cared for.

Gunville questions

Can you do glazing silicone in Gunville?

Yes. Our work covers London and the South East, and Gunville is part of that. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.

Is Gunville within the area you cover?

Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

What does glazing silicone cost?

Every job is different, so each one gets its own quote. To get one, ring 0345 464 0079 or email us and let us know what needs doing and where.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

What guarantee do I get?

Our 12-month guarantee applies to every job we do.

Do you work for letting agents?

Yes. Domestic, commercial and hotel work are all part of what we do.

Do you hold any approvals?

Yes. We hold ARBOMaster approved applicator status.

Do you have insurance?

Yes. We’re fully insured.

How the visit works

We keep the work tidy and contained to the joints we are treating, so you can carry on as normal. Expect the work to take a few hours, depending on how many joints need doing, and we explain the cure time before we leave. For a village or hamlet like Gunville, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

We start by finding the leak and making sure sealant is the cause.
Old silicone is cut away from the glass and frame without scratching either.
The glass and frame are cleaned and degreased.
We apply a neutral-cure glazing silicone and tool it smooth.
The finished joints are checked and, where it’s safe, tested with water.

How to prepare

Keep pets and children clear of the area while we work
For business premises, tell us about site rules or sign-in
Clear items away from the joints we are working on

Get a quote

The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.

Get a price