Greater London · England
Gordon Hill Glazing Silicone
Problem with your glazing joints in Gordon Hill? We cut out the old, prepare the joints and apply the right sealant.
- Leaks from the base of a shower screen
- Failed joints on frameless glass
- Mouldy sealant around glass panels
How we quote for glazing silicone
The price is agreed before any work begins. It’s based on:
- Mould in or behind the old joints
- Which sealant suits the joint
- How many areas need sealing
- Working hours on commercial sites
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Whether it has been sealed before
- Pictures of the joints, sent by email
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear price before any work starts.
Glazing silicone in Gordon Hill
Glazing silicone that has yellowed, blackened or come away spoils the look and lets water in. We remove it without scratching the glass or frame and reseal the joint. Common call-outs are for shower screens leaking along the wall or tray and water tracking down the inner face of the glass, on glass balustrade bases, glass-to-frame joints and rooflights.
London’s Victorian and Edwardian terraces were built with timber sash windows, and many still have them or their replacements. Whatever is in the opening now, the joint between frame and wall is what keeps the weather out, in Gordon Hill as anywhere.
You’re covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Where
- Gordon Hill (EN2, EN1)
- Wider area
- Greater London
- Guarantee
- 12 months on all our work
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
How it works
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a few hours for most jobs, depending on how much there is to do. In Gordon Hill, flats, stairs and shared entrances are part of the routine. Mention any building rules, key holders or managing agents when you book.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- We check the finished joints and test with water where it’s safe.
Getting ready for the visit
- Tell us if parking is tricky
- Mention any leaks or damp you’ve noticed
- Mention if the joints have been sealed before
Getting a quote
Want a quote for glazing silicone? Please ring 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Related advice
Places near Gordon Hill
More services for Gordon Hill
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
What we cannot put right
To be straight with you, some problems need a different trade:
- A sealed unit that has misted inside
- A frame that needs repairing or replacing
- A roof that has moved or dropped
If in doubt, call 0345 464 0079 or email us and we will say what we think.
Joints and surfaces we work on
- Glass-to-frame joints
- Shower screens
- Glass-to-glass joints
- Conservatory frames
- Glass balustrade bases
- Rooflights
What happens if it’s left?
Replacing a conservatory roof is major work. Where the water is getting in through sealant, resealing is far simpler. If the roof is the problem, we will say so. In a flat in Gordon Hill, failed sealant seldom stays inside your own four walls: water from a shower or window joint can reach the flat below, and gaps in fire-stopping matter to everyone in the building.
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and give you a clear price before any work starts.
What you get with us
- You choose the colour before work begins
- Old sealant always removed completely
- Experience in homes, commercial sites and hotels
- We are fully insured
Different surfaces, different methods
Glass-to-frame joints
The sealant must stick to glass and frame alike. We choose a product that suits both.
Conservatory frames
Leaks often start where the frame meets the wall. We cut out the old sealant and reseal.
Glazing silicone in Gordon Hill: local notes
With historic houses such as Forty Hall (about 0.9 miles north-east) nearby, there’s older building stock in the area around Gordon Hill as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
In the older streets around St Michael & All Angels, the joint between an old wall and a newer frame is usually the first place rain gets in. Rented homes near Gordon Hill station change hands often, and leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. For site and facilities teams at buildings such as St Michael's CofE Primary School, larger buildings have plenty of frames, and the mastic around each one ages.
Gordon Hill is about 3 miles north of Edmonton, in Greater London. Across the EN2 area, our applicators can take on glazing silicone. Our Greater London coverage runs to 764 places, and Gordon Hill is one of them. You can also see our page for London, roughly 11 miles from Gordon Hill.
We cover every part of EN2 and EN1 for glazing silicone and the streets around it. You’ll find streets such as Lea Road, Farr Road and Manor Road. Neighbouring places we cover for glazing silicone include Clay Hill (1 mile north), Enfield Chase (1 mile south-west), Forty Hill (1 mile east), Enfield (1 mile south) and Crews Hill (1 mile north-west). Further out, we also cover London (11 miles south), City of Westminster (11 miles south), Marylebone (10 miles south), Kensington (12 miles south-west), St Pancras (10 miles south) and Shoreditch (10 miles south).
Around Gordon Hill
Typical jobs here are in homes near Chace Community School, Russet House School and The Wonder pub and the streets around them. There’s a railway station in Gordon Hill itself: Gordon Hill station. Nearby you’ll also find Edmonton Green Shopping Centre (3.1 miles south-east) and St Michaels Hospital (within half a mile south-east). Not far away are Pole Hill and Bowyer's Water.
Looking after it afterwards
Joint life depends on how it’s used and looked after. We suggest:
- Do not use a blade near the sealant
- Open vents or windows to let moisture out
- Act on drips or damp patches early
- Stick to mild cleaners on glass
Look over the glazing joints every year or so. Spotting a crack early means a simpler fix, before water gets in.
Cracked glazing silicone means the joint has failed. Renewing it early keeps it simple compared with fixing water damage later.
FAQs for Gordon Hill
Is Gordon Hill in your area for glazing silicone?
Yes, Gordon Hill is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.
I let a flat near Gordon Hill station. Can you help?
Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or email us and tell us about the property, and we will send you a clear quote.
Is balustrade sealant something you do?
We can. The old sealant is removed and the joint resealed using a sealant that suits the materials.
Can you just put new silicone over the old?
Silicone doesn’t stick to silicone, so a top-up soon lets water through. The old bead always comes out first.
Do you reseal glass shower screens?
Yes. We cut out the old silicone and reseal the glass-to-wall and glass-to-tray joints.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
Is a special sealant needed for glass?
A glazing-grade silicone is best. Ours is a neutral-cure glazing silicone and anti-fungal silicone in wet areas.