Hampshire · England
Brighton Hill Glazing Silicone
Professional glazing silicone in and around Brighton Hill, with every bit of old sealant taken out first and a one-year guarantee.
- Rooflight joints letting water in
- Drips on the inside of a conservatory window
- New silicone smeared over old sealant
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
We work for landlords and letting agents as well as householders. Sealant work between tenants keeps a property looking cared for.
Glazing silicone in Brighton Hill, done properly
Glass, frames and walls all move at different rates, so the sealant between them does a lot of work. Once it splits or comes away, water finds a way through. We replace it with a glazing silicone that suits the glass and frame. We work on conservatory frames, shower screens and glass-to-frame joints, and the jobs we see most are cracked silicone between glass panels and split or lifting silicone on glass.
Around Brighton Hill, conservatories, garden rooms and patio doors are often part of the house. Those joints need the same attention as the main windows.
A 12-month guarantee comes as standard, so you are covered after we’ve gone.
- Where
- Brighton Hill (RG22, RG21)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What happens if it’s left?
Resealing cannot fix a failed unit or a cracked panel. We will tell you that rather than seal it anyway and point you to a glazier or roofer. Homes in smaller places like Brighton Hill can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Why book with us
- Tidy, careful work
- A sealant colour to suit the surroundings
- Homes, businesses and hotels
- Anti-fungal sanitary silicone in wet areas
Read what affects the cost and what customers say.
Brighton Hill homes and the weather
The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like The Vyne (about 4 miles north) are a reminder that the area around Brighton Hill has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
Schools such as Brighton Hill Community School are buildings too, and the mastic around its windows and doors needs looking after like any other building’s. Letting a property close to Basingstoke station? Then leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.
Brighton Hill is about 1 mile south of Basingstoke, in Hampshire. Anywhere in RG22, we can carry out glazing silicone at your property. Brighton Hill is one of 683 towns and villages in Hampshire we cover for glazing silicone. Our Reading page covers work nearby, about 15 miles away.
Postcode districts we cover here for glazing silicone: RG22 and RG21. Whether your property is on Pheby Road, Wella Road and Barber Road or a nearby road, our applicators can take on the job. Brighton Hill is on the A30, so it’s easy for us to get to. We also cover the places around Brighton Hill: South Ham (1 mile north), Buckskin (1 mile north-west), Basingstoke (1 mile north), Hatch Warren (1 mile south) and Kempshott (1 mile west). We also work in nearby towns such as Farnborough (15 miles east), Fleet (12 miles east), Aldershot (15 miles east), Alton (9 miles south-east), Yateley (14 miles north-east) and Tadley (7 miles north).
What’s near Brighton Hill
Locally, jobs take us to homes and businesses close to Eastrop Park, Chalk Ridge Primary School and Jolly Farmer Public House, among other places. For rail, the closest station is Basingstoke station, about 1.6 miles north-east of the centre. Nearby you’ll also find Basingstoke and North Hampshire Hospital (2.1 miles north) and Festival Place (1.5 miles north-east). Not far away are Daneshill Park Woods and Farleigh Hill.
Your questions about glazing silicone in Brighton Hill
Do you cover smaller places like Brighton Hill?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Basingstoke station. Can you help?
Yes. We work for letting agents and landlords as well as householders. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear quote.
Do you reseal glass shower screens?
Yes. We remove the old sealant and reseal the wall and tray joints.
Which silicone is used for glass joints?
We use a neutral-cure glazing silicone suited to glass and the frame. In bathrooms, we use anti-fungal silicone.
How long does the job take?
As a guide, most jobs take a few hours for most jobs. Larger jobs naturally take longer, and we’ll tell you how long to expect.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Places near Brighton Hill
Other services in Brighton Hill
What happens on the day
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and tidy away. It usually takes a few hours, depending on how many joints need doing. A visit to Brighton Hill is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we agree the joints to be done.
- Old sealant is removed from the glass and frame.
- We clean and prepare the joint.
- We apply and tool the new silicone.
- The joints are checked before we leave.
Before we arrive
- Clear the area around the work
- Tell us about any water getting in
- Let us know about stairs, lifts or work at height
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Advice
How to look after the new joints
Looking after new joints is easy:
- Use gentle products around the joints
- Ventilate the conservatory to cut condensation
- Do not leave a drip for the next storm
- Look over the glazing joints once a year
Check the joints once a year. Spotting a crack early means a simpler fix.
Damp patches, drips and condensation along a joint are worth checking. The cause may be sealant or another part and we’ll find out which.
Signs you need glazing silicone in Brighton Hill
Sealant laid over old sealant doesn’t last. Many failed joints we see have been topped up rather than cut out, and water gets between the layers.
Most people get in touch after spotting something like this:
- Leaks where conservatory glass meets the frame
- Split or lifting silicone on glass
- Drips on the inside of a conservatory window
- New silicone smeared over old sealant
Homes close to The Church Of Christ The King include some older properties, and the joint between an old wall and a newer frame is generally the first place rain gets in.
Comparing quotes
- Is the old sealant removed completely?
- How hidden problems are handled
- Are they insured?
- Which sealant they’ll use, and why
What sealant work can’t fix
We’ll always be straight with you, so here’s what new sealant won’t do:
- A sagging or failing conservatory roof
- A frame that needs repairing or replacing
- A sealed unit that has misted inside
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Surfaces we seal
- Shower screens
- Glass-to-frame joints
- Glass-to-glass joints
- Glass balustrade bases
- Rooflights
- Conservatory frames
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.