West Sussex · England
Floor & skirting joints in Westergate, West Sussex
Floor joint sealing in Westergate from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Perimeter joints in tiled floors filled with grout
- Failed joint filler in concrete floors
- Cracked grout where a tiled floor needs a movement joint
Floor joint sealing for homes and businesses in Westergate
Thresholds are where two floors, or a floor and a door, meet. We seal them with a flexible sealant suited to the floor finishes either side in a colour to suit. If you’re dealing with cracked grout where a tiled floor needs a movement joint and chipped and open joints in warehouse floors, we can put it right.
If you’ve bought a new home in or near Westergate, the first year or two is a good time to check the sealant. Gaps at skirtings, shower seals pulling away and missing mastic around frames are common snags.
The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or drop us an email.
- Location
- Westergate (PO20)
- Wider area
- West Sussex
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Questions from Westergate
Is Westergate within the area you cover?
Yes. Westergate is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do floor joint sealing in Westergate?
Yes. Our work covers London and the South East, and Westergate is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Do you take out the old sealant first?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
Do you have insurance?
Yes. We are fully insured.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. Then call 0345 464 0079 or drop us an email.
Can I add another job to the visit?
Of course. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator.
Can tenants book the work?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the job takes a morning or an afternoon for most homes in most cases. For a job in Westergate, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we check the joint and the floor and agree which sealant suits it.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about earlier repairs to the joints
- Clear the area around the work
Get a quote
If you’re in Westergate and need floor joint sealing, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.
Related advice
For landlords and businesses
We work for letting agents and landlords as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
What sealant work cannot fix
Before booking, it’s worth knowing the limits:
- Damaged concrete that needs breaking out and repairing
- Structural movement or subsidence
- Leaks from a failed tanking system
If you are not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.
Surfaces we seal
- Tiled floors
- Commercial floors
- Thresholds
- Wet room & bathroom floors
- Concrete floor joints
- Skirting boards
How to look after the new joints
To keep the joints looking good and working properly:
- Don’t paint over silicone
- Keep caulk for dry, still joints only
- Keep dirt out of the joints
- Act on grout cracks that run in a straight line
Follow the cure time before walking on or cleaning the joint. Feet are generally fine before mopping or wheeled traffic so we’ll give you each time.
Concrete joints damaged by traffic get worse quickly. Sealing them early protects the edges and the floor safer.
Leave it or put it right?
Floor joints left open collect dirt that’s hard to clean out. Sealed joints are easier to keep clean. In a smaller place like Westergate, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
A failed joint rarely gets cheaper to fix by waiting. If you are unsure, phone 0345 464 0079 or email us for an honest opinion and a quote.
Why us?
- A sealant colour to suit the surroundings
- Trusted Arbo and Everbuild sealants
- Fully insured
- We agree the colour with you first
Take a look at how sealant jobs are priced or what customers say.
Nearby places to Westergate
What else we do in Westergate
Floor joint sealing around Westergate
Floors around West Sussex run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. That is why the skirting and threshold joints need a flexible seal.
Rented homes near Barnham station change hands often, and open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Westergate is about 3 miles north of Bognor Regis, in West Sussex. Anywhere in PO20, our applicators can take on floor joint sealing. Across West Sussex, we cover 371 places, Westergate among them. You can also see our page for Portsmouth, about 18 miles away.
Here we cover the PO20 postcode area for floor joint sealing. That includes homes and businesses on Oaks Close, Westergate Street and Rosvara Avenue and the roads around them. Neighbouring places we cover for floor joint sealing include Nyton (1 mile north-west), Eastergate (1 mile east), Aldingbourne (1 mile west), Norton (1 mile north-west) and West Barnham (1 mile east). Further out, we also cover Worthing (12 miles east), Bognor Regis (3 miles south), Chichester (5 miles west), Selsey (9 miles south-west), Littlehampton (6 miles east) and Lancing (15 miles east).
Landmarks near Westergate
Typical jobs here are in homes near Ormiston Six Villages Academy, among other places. The nearest railway station is Barnham station, roughly 1.3 miles east. A little further out are Tote Copse Castle (1 mile west) and Bognor Regis War Memorial Hospital (3.1 miles south).
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
When to call us in Westergate
Concrete floor joints break down when traffic runs over open or failed joints. Hard wheels damage the joint edges until the joint widens.
People generally contact us after spotting something like this:
- Threshold joints that have opened or worn
- Gaps opening between the floor and skirting
- Concrete floor joints that have broken down
- Cracked caulk along skirting in bathrooms and kitchens
If you look after a building such as Aldingbourne Primary School, entrance and corridor floor joints take a lot of traffic.
What your quote should include
- What happens if they find a problem under the old sealant
- When the joint can take water or movement
- Whether you can choose the colour
- How the surfaces are prepared before sealing