Surrey · England
Floor & skirting joints in South Godstone, Surrey
Floor joint sealing across South Godstone and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Floor edges that trap water and grime
- Gaps at thresholds between rooms
- Grout used at the floor edge instead of sealant
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Get cracks along tile grout lines looked at early
- Look at floor joints each spring
- Ask before painting over a sealed joint
- Avoid caulk in bathrooms and kitchens
Keep heavy furniture from dragging across the joints. Dragging can tear the bead.
Sealing a gap while it’s small is a quick job. Left alone, they collect dirt and widen and are harder to clean out.
How we handle floor joint sealing in South Godstone
The gap under a skirting board often opens as floors and walls move with the seasons. Decorators’ caulk generally cracks where there’s movement, so we use a flexible sealant that moves with the floor. Typical jobs include dirt and water collecting in open floor joints and gaps between floors and kitchen plinths, on skirting boards, commercial floors and wet room & bathroom floors.
Work in a small place like South Godstone just needs the journey and access planning, and the work itself is the same as on any site.
Each job carries a 12-month guarantee.
- Where
- South Godstone (RH9)
- Wider area
- Surrey
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Also near South Godstone
Other services in South Godstone
How the visit works
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a morning or an afternoon for most homes. Somewhere as small as South Godstone, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Old caulk, grout or sealant is removed from the joint.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- The sealant goes in, chosen for the floor and coloured to suit it.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
Before we arrive
- Mention any parking rules near the property
- On commercial sites, let us know about site rules
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.
Read more
Your questions about floor joint sealing in South Godstone
Will you come out to South Godstone?
Yes. South Godstone is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Godstone station?
Yes. We work for landlords and agents as well as homeowners. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Do you seal floor joints in bathrooms and kitchens?
Yes. The old joint comes out and a flexible silicone replaces it.
Are you insured?
Yes. We’re fully insured.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Is caulk good enough for skirting?
Only on dry joints that don’t move. It splits once the floor shifts and the gap reopens. A flexible sealant lasts longer there.
How do I get a quote for floor joint sealing in South Godstone?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we will talk you through it.
Surface by surface
Skirting boards
Skirting pulls away from the floor as floors shrink and settle. We seal them with a flexible sealant rather than caulk painted or coloured to match.
Thresholds
Where a tiled floor meets timber or carpet, the joint takes movement from both sides. We bridge them with a flexible bead.
What we can’t put right
New sealant cannot fix everything, and we will tell you before any work starts. Sealant will not put right:
- Large cracks that need a surveyor
- Bouncy or failing floorboards
- Cracked or broken concrete slabs
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Surfaces we seal
- Skirting boards
- Commercial floors
- Thresholds
- Wet room & bathroom floors
- Tiled floors
- Concrete floor joints
What we’re called out for in South Godstone
Some floors were never given a perimeter gap or movement joint. As it expands, the edges lift or crack.
Keep an eye out for any of the following:
- Failed seals where bathroom floors meet baths and panels
- Perimeter joints in tiled floors filled with grout
- Gaps opening between the floor and skirting
- Threshold joints that have opened or worn
Letting a property close to Godstone station? Then a tidy floor and skirting joint helps a rental look ready for the next tenant.
What your quote should include
- What insurance they hold
- Which colour the sealant will be
- The length of the guarantee
- Who turns up on the day
What affects the cost of floor joint sealing
The quote reflects the job in front of us. We look at:
- Which sealant suits the joint
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or email us and we will give you an honest view and a quote.
What to tell us for a quote
To make quoting easier, please include:
- Whether it’s a home or a business
- Roughly how big the job is
- The problem you’ve noticed
- Where the job is, and your postcode
We quote each job on its own. Simply phone 0345 464 0079 or email us and describe the job and send photos if you have them.
New homes and floors in South Godstone
Floors around Surrey run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
Community buildings like St Stephen are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. If you look after a building such as St Stephen's CofE Primary School, entrance and corridor floor joints take a lot of traffic.
South Godstone is about 5 miles south of Caterham, in Surrey. For floor joint sealing in and around South Godstone, please phone 0345 464 0079 or drop us an email for a quick quote. We cover Surrey from our Crawley base, South Godstone included. Our Surrey coverage runs to 395 places, and South Godstone is one of them. For nearby work, see our Crawley page (10 miles or so).
All of RH9 is covered for floor joint sealing. Whether your property is on Eastbourne Road, Oaklands and Woodlands Drive or a nearby road, our applicators can take on the job. If you’re just outside South Godstone, we cover Crowhurst Lane End (1 mile east), Anglefield Corner (1 mile south-west), Tandridge (1 mile north-east), Crowhurst (2 miles south-east) and Church Town (2 miles north). Larger places within reach include Epsom (12 miles north-west), Horley (6 miles south-west), Redhill (5 miles west), Ewell (13 miles north-west), Reigate (7 miles west) and Caterham (5 miles north).
What’s near South Godstone
Around South Godstone, our work takes us to homes and buildings near Fox And Hounds Public House and Tilburstow Hill and the streets around them. There’s a railway station in South Godstone itself: Godstone station. Other landmarks nearby include Bletchingley Castle (2.9 miles north-west) and Haxted Watermill Museum (3.9 miles south-east). Not far away are Mercers Lake and Bay Pond.
Can I do it myself?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.