Surrey · England
Floor & skirting joints in Parkgate, Surrey
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Parkgate and across Surrey. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Gaps at thresholds between rooms
- Caulk that has cracked where the floor moves
- Open joints around bathroom floor edges
Floor joint sealing in Parkgate
In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. We reseal them with a product chosen for the movement and the traffic. If you have caulk that has cracked where the floor moves and dirt and water collecting in open floor joints, we can help, whatever the surface.
Older homes in small places like Parkgate often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
Each job carries a 12-month guarantee, large or small.
- Place
- Parkgate (RH5)
- Region
- Surrey
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Aftercare tips
After the cure time, these simple habits help:
- Keep dirt out of the joints
- Avoid caulk in bathrooms and kitchens
- Check the sealant is paintable before decorating
- Lift furniture rather than dragging it across joints
Follow the cure time before walking on or cleaning the joint. Feet are generally fine before mopping or wheeled traffic, and we will tell you both.
Once concrete joint edges start to break, wheels make it worse. Sealing them early protects the edges.
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Towns and villages near Parkgate
Other services in Parkgate
Different surfaces, different methods
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. We reseal them with a sealant suited to wet areas.
Thresholds
Threshold joints get a lot of feet, so the sealant has to be tough as well as flexible and neatly finished.
What happens on the day
At the end, we look at the finished work together. The visit itself normally takes a few hours, depending on the length of joint, depending on the amount of work. Somewhere like Parkgate needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- The room is cleared along the joints so we can reach them.
- We take out the cracked caulk, grout or old sealant.
- Edges are cleaned and dried.
- We apply a flexible sealant suited to the floor.
- Finally, we check the work and talk you through aftercare.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Move anything stored near the joints
- Tell us about any water getting in
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Related advice
Floor joint sealing around Parkgate
Floors around Surrey run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
In and around Parkgate, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
Parkgate is about 4 miles south-east of Dorking, in Surrey. Jobs in Parkgate get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Parkgate is one of 395 towns and villages in Surrey where we work for floor joint sealing. Our Crawley page covers work nearby (6 miles or so).
Jobs for floor joint sealing in RH5 works the same way as everywhere else we cover. If you need floor joint sealing at a property on Broad Lane, Mill Lane and Becket Wood or anywhere close by, we can help. We also cover Shellwood Cross (1 mile north), Newdigate (1 mile south-west), Cudworth (2 miles south), Nalderswood (2 miles north-east) and Norwood Hill (2 miles east). Further out, we also cover Guildford (14 miles west), Epsom (11 miles north), Horley (5 miles east), Redhill (6 miles north-east), Ewell (12 miles north) and Reigate (5 miles north-east).
Near you in Parkgate
In Parkgate, that means homes and buildings near Newdigate Brickworks. Parkgate’s nearest station is Holmwood station, roughly 2.1 miles west of the centre. Well-known places in the area include Langley Green Hospital (5.1 miles south-east) and Betchworth Castle (3.8 miles north). The countryside around Parkgate includes Reigate Heath and Leith Hill.
How we quote for floor joint sealing
Call for a quick quote. The main things that affect it are:
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
- Working hours on commercial sites
- Access and height
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first.
Asking for a quote
When you call or email, these details help:
- If someone has resealed it before
- The address or postcode of the job
- The type of property
- Access, such as stairs, a lift or height
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Common questions in Parkgate
Can you do floor joint sealing in Parkgate?
Yes, Parkgate is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
Do you work for landlords with property near Holmwood station?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can be quoted together. Just call 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Do you seal floor joints in bathrooms and kitchens?
Yes. We cut out any old sealant or caulk and reseal with flexible silicone in a colour to suit.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Where do you work from?
Mr Mastic is based in Crawley. Our applicators cover Parkgate.
Is it OK to seal over old sealant?
No. Fresh sealant does not stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Are you ARBOMaster approved?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Do you need floor joint sealing in Parkgate?
Some floors were never given a perimeter gap or movement joint. It pushes against the walls and skirting as it expands.
These are the problems we are asked about most:
- Dirt and water collecting in open floor joints
- Gaps at thresholds between rooms
- Skirting caulk that keeps splitting
- Failed seals where bathroom floors meet baths and panels
Letting a property close to Holmwood station? Then gaps at skirtings and thresholds are worth sealing between tenancies.
What to look for in a quote
- How much experience the applicator has
- What guarantee comes with the work
- Which colour the sealant will be
- How the surfaces are prepared before sealing