Kent · England
Floor Joint Sealing in Lydden
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Lydden, backed by a one-year guarantee. Call for a quick quote.
- Gaps between floors and kitchen plinths
- Gaps opening between the floor and skirting
- Perimeter joints in tiled floors filled with grout
Different surfaces, different methods
Skirting boards
On painted skirting, we can use a flexible sealant that takes paint. Where water is involved, silicone is the better choice.
Tiled floors
Large or heated tiled floors need room to move. We replace grout with flexible sealant along the right lines.
Floor joint sealing in Lydden, done properly
Tiled floors can crack along the grout when there’s no room for movement. We can turn a line of grout into a movement joint by replacing it with flexible sealant in a matching colour. If you have dirt and water collecting in open floor joints and skirting caulk that keeps splitting, we can put it right, on tiled floors, concrete floor joints and thresholds alike.
Around Lydden, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Lydden (CT15)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Lydden
Also in Lydden
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
We also work for property managers and facilities teams. Several sites can go on one quote, and we are fully insured.
Joints and finishes in Lydden homes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
If you look after a church, hall or community building such as Church of St Mary Church of St Mary Virgin, floor and skirting joints in halls and kitchens wear like any others. Schools such as Lydden Primary School are buildings too, and entrance and corridor floor joints take a lot of traffic.
Lydden is about 3 miles north-west of Dover, in Kent. Homes, rented property, offices and hotels in Lydden is covered for floor joint sealing, old or new, large or small. Every job comes with our one-year guarantee. We cover 922 towns and villages across Kent. Chelmsford is on our list too, around 51 miles away.
Jobs for floor joint sealing in CT15 works the same way as everywhere else we cover. Streets in the area include St Marys Rise, Canterbury Road and The Close, all of which we cover. Other places close to Lydden include Coldred (1 mile north), Ewell Minnis (1 mile south-west), Temple Ewell (1 mile south-east), Halfway Street (1 mile north-west) and Wolverton (2 miles south). Larger places within reach include Canterbury (11 miles north-west), Dover (3 miles south-east), Folkestone (6 miles south-west), Ramsgate (14 miles north-east), Deal (8 miles north-east) and Herne Bay (15 miles north).
Local landmarks in Lydden
In Lydden, that means homes and buildings near Sladden Wood and Hope Inn. Lydden’s nearest station is Kearsney station, roughly 1.6 miles south-east of the centre. A little further out are Dover Transport Museum (2.3 miles south-east) and Dover Castle (4.3 miles south-east). Green spaces nearby include Dover Western Heights.
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes a morning or an afternoon for most homes. In a small place like Lydden, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- The joint is tooled neatly and the cure time explained.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Common questions in Lydden
Do you cover Lydden for floor joint sealing?
Yes. We work across London and the South East, and Lydden is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
Do you cover smaller places like Lydden?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is it OK to seal over old sealant?
No, because it fails. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Can you reseal concrete floor joints in an industrial unit?
Yes, including warehouses, units, shops and offices. We can plan around your opening times with out-of-hours work where needed.
Do you use a paintable sealant?
For painted skirting, we use a flexible product that can be painted. Silicone won’t take paint, so it’s kept for wet areas and unpainted joints.
Why not just use caulk?
Because caulk cracks where there’s movement or water. Floor edges move through the year, so a flexible sealant suits them better.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
How long before the joint can take traffic?
It depends on the product and the conditions. We give you the times for walking, cleaning and traffic when we finish.
Why it’s worth doing now in Lydden
Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. Sealing them now is a short job in most rooms. Where a wall is exposed, as many are in small places like Lydden, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting. If you are unsure, ring 0345 464 0079 or email us for an honest opinion and a quote.
Why Lydden customers choose us
- Every job guaranteed for a year
- White, clear, grey or coloured to suit, where the product allows
- Fully insured
- ARBOMaster approved applicator
Take a look at our cost guide and customer reviews.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Cone off fresh joints until they’re ready
- Look at floor joints each spring
- Avoid caulk in bathrooms and kitchens
- Ask before painting over a sealed joint
Mop with a well-wrung mop rather than flooding the floor. Less water at the edges helps the joints last.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. A sound seal stops that happening.
Signs you need floor joint sealing in Lydden
Some floors were never given a perimeter gap or movement joint. It pushes against the walls and skirting as it expands, and the sealant or grout breaks.
Look out for any of the following:
- Perimeter joints in tiled floors filled with grout
- Failed seals where bathroom floors meet baths and panels
- Open gaps along the bottom of skirting boards
- Open joints that fill with dirt
If you let a flat or house near Kearsney station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Questions to ask before booking
- Is the old sealant removed completely?
- When the joint can take water or movement
- Which sealant they’ll use, and why
- Which colour the sealant will be