Hampshire · England
Floor & skirting joints in Lowford, Hampshire
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homeowners, landlords and businesses in Lowford. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Concrete floor joints that have broken down
- Skirting that has pulled away from the floor
- Gaps between floors and kitchen plinths
Questions from Lowford
Will you come out to Lowford?
Yes, Lowford is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Bursledon station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Can you add a movement joint to a tiled floor?
Usually, yes. A crack along a grout line often means the floor needs room to move. We rake out that line and seal it with flexible sealant.
Do you use a paintable sealant?
Where the skirting will be painted, we can use a flexible sealant that takes paint. Silicone will not take paint, so it’s kept for wet areas and unpainted joints.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we have agreed the job, you do not need to watch us work.
What does floor joint sealing cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Where do you work from?
We’re based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Floor joint sealing in Lowford
Where skirting is painted, we can use a flexible sealant that takes paint. For bathrooms and kitchens, silicone is usually the better choice, which is not made to be painted. If you have caulk that has cracked where the floor moves and gaps between floors and kitchen plinths, we can help, whatever the surface.
Homes around Lowford range from older cottages to newer houses, and their floors range just as widely, each moving in its own way. The sealant at skirtings and thresholds has to suit the floor it meets.
There’s a 12-month guarantee on every job, large or small.
- Where
- Lowford (SO31)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Why deal with it now?
Dirt builds up in open joints and makes the floor look worn. Sealed joints are easier to keep clean and finishes the floor. Homes in smaller places like Lowford can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- A choice of colours where the product allows
- ARBOMaster approved applicator
- Domestic, commercial and hotel work
- Rated 4.9 stars on Google
When to call us in Lowford
Concrete floor joints break down when traffic runs over open or failed joints. Pallet trucks and trolleys knock the edges away and the joint gets wider.
These are the problems we are asked about most:
- Worn sealant at door thresholds
- Rigid edge joints in tiled floors
- Floor edges that trap water and grime
- Gaps opening between the floor and skirting
If you let a flat or house near Bursledon station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
Comparing quotes
- Whether they’re fully insured
- What preparation is included
- What happens if the job turns out different
- Whether the sealant suits the joint
Keeping the joints in good condition
Simple care keeps the joints in good condition. We recommend:
- Have a cracking tiled floor checked before tiles break
- Sweep along the edges of the floor
- Avoid caulk in bathrooms and kitchens
- Check the sealant is paintable before decorating
Don’t paint over silicone. If you plan to paint, we’ll use a paintable product.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. Resealing early keeps it out.
New homes and floors in Lowford
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Managing a site like Bursledon Church of England Infant School? Then floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. Community buildings like St Paul’s Church are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Lowford is about 2 miles south-west of Hedge End, in Hampshire. Anywhere in SO31, our applicators can take on floor joint sealing. Lowford is one of 683 places in Hampshire we cover.
We cover every part of the SO31 postcode area for floor joint sealing and the streets around it. Floor joint sealing is available to properties on Hamble Lane, St George Close and Woolwich Close. Close by, we work in Old Netley (1 mile south-west), Bursledon (1 mile south-east), Butlocks Heath (1 mile south-west), Hound (1 mile south-west) and Netley (1 mile south-west). Further out, we also cover Winchester (12 miles north), Gosport (10 miles south-east), Havant (15 miles east), Eastleigh (5 miles north), Fareham (6 miles south-east) and Horndean (14 miles east).
Around Lowford
Around Lowford, our work takes us to homes and buildings near Oasis Academy Mayfield, Westwood Woodland Park and The Linden Tree pub. For rail, the closest station is Bursledon station, roughly 0.9 miles south-east of the centre. Well-known places in the area include Coldeast (2.3 miles south-east) and Netley Castle (1.9 miles south-west). Not far away are Netley Common.
Nearby places to Lowford
More services for Lowford
What affects the cost of floor joint sealing
We quote each job individually. This is what makes a difference:
- Any mould that needs treating
- The amount of work
- Working hours on commercial sites
- Which sealant suits the joint
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
Helping us quote
There’s no need for technical detail. Just tell us:
- The problem you’ve noticed
- Where the job is, and your postcode
- Any access issues, like height or stairs
- Whether it’s a home or a business
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you are ready, ring 0345 464 0079 or drop us an email.
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Landlord and commercial work in Lowford
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
What we do, step by step
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes a few hours, depending on the length of joint and we leave things clean and tidy. For a job in Lowford, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- A flexible sealant suited to the floor is applied and tooled.
- Finally, we check the work and talk you through aftercare.
Getting ready for the visit
- Mention any parking rules near the property
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
Get a quote
Getting a quote is simple: let us know what needs doing and where. A few photos by email make the job easier to understand, and we will take it from there.