Fife · Scotland
Floor Joint Sealing in Inverkeithing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints in Inverkeithing, with a 12-month guarantee on every job. Ask us for a quote.
- Caulk that has cracked where the floor moves
- Open joints that fill with dirt
- Failed seals where bathroom floors meet baths and panels
Floor joint sealing in Inverkeithing
In kitchens and bathrooms, the joint where the floor meets a bath panel, plinth or skirting takes mop water every day. We seal them with a flexible, water-resistant sealant and stops dirt collecting. If you’re dealing with grout used at the floor edge instead of sealant and threshold joints that have opened or worn, we can help.
Around smaller Scottish places like Inverkeithing, new homes tend to be single plots or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
All our work comes with our 12-month guarantee, wherever you are in Fife.
- Where
- Inverkeithing (KY11)
- Region
- Fife
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Do you need floor joint sealing in Inverkeithing?
A new floor or screed shrinks and settles as it dries. The edges pull away from the skirting and anything rigid cracks.
People generally contact us after spotting something like this:
- Open joints that fill with dirt
- Tiled floors with no room to move
- Gaps opening between the floor and skirting
- Failed joint filler in concrete floors
If you look after a church, hall or community building such as St Peter's Parish Church, floor and skirting joints in halls and kitchens wear like any others.
Comparing quotes
- What guarantee comes with the work
- How the colour is chosen
- Whether they seal over old material or remove it
- How much experience the applicator has
Quotes for floor joint sealing in Inverkeithing
Every job gets its own quote. This is what makes a difference:
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
- The type of sealant required
- Access and height
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
When you contact us, these details help:
- Roughly how big the job is
- How we’d reach the joints
- Whether it has been sealed before
- Where the property is
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved before giving you a price.
New homes and floors in Inverkeithing
Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles. Floors around Fife run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. That is why the skirting and threshold joints need a flexible seal.
For site and facilities teams at buildings such as Inverkeithing High School, floor and threshold joints in busy corridors wear quickly and are best resealed early. Rented homes near Inverkeithing station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
Inverkeithing is about 3 miles south-east of Dunfermline, in Fife. If you need floor joint sealing in Inverkeithing, please email us at info@mrmastic.co.uk for a quick quote. We cover Fife from our Crawley base, Inverkeithing included. Our Fife coverage runs to 133 places, and Inverkeithing is one of them. There’s also a page for Edinburgh, roughly 10 miles from Inverkeithing.
We cover every part of the KY11 postcode area for floor joint sealing and the streets around it. That includes homes and businesses on High Street, Heriot Street and Port Street and the roads around them. Being close to the B981, Inverkeithing is easy for our applicators to reach. Other places close to Inverkeithing include Jamestown (1 mile south), Hillend (1 mile north-east), North Queensferry (1 mile south), Dalgety Bay (2 miles east) and Fordell Firs (2 miles north-east). Further out, we also cover Dunfermline (3 miles north-west), Kirkcaldy (11 miles north-east), Glenrothes (14 miles north-east), Cowdenbeath (6 miles north), Dysart (12 miles north-east) and Abbeyview (3 miles north-west).
What’s near Inverkeithing
Locally, jobs take us to homes and businesses close to The Burgh Arms and the streets around them. Inverkeithing has its own railway station: Inverkeithing station. Other landmarks nearby include Queensferry Museum (2.9 miles south) and Kingsgate Centre (3.7 miles north-west). Not far away are Dundas Loch.
What we do, step by step
There is not much for you to do on the day. Show us the job and we will take it from there. The work itself takes a few hours for most rooms, longer for large commercial floors from start to finish. Outdoor work around Inverkeithing depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Old caulk, grout or sealant is removed from the joint.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
How to prepare
- Try not to wet indoor joints just before the visit
- Tell us about any previous sealing or DIY attempts
- Keep pets and children clear of the area while we work
Getting a quote
Getting a quote is simple: tell us what needs doing and where. A few photos by email make the job easier to understand, and we will come back to you with a quote.
Advice
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Act on grout cracks that run in a straight line
- Mark off resealed joints in warehouses
- Keep dirt out of the joints
- Use furniture pads near skirting
Do not paint over silicone. If the joint will be painted, tell us beforehand so we use a paintable sealant.
Once concrete joint edges start to break, wheels make it worse. Early resealing helps keep the joint intact and the surface smoother.
Landlords, agents and businesses in Inverkeithing
We work for landlords and letting agents as well as householders. Sealant work between tenants keeps a property looking cared for.
If you manage several properties in or around Inverkeithing, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Inverkeithing: your questions answered
Do you cover smaller places like Inverkeithing?
Yes. Inverkeithing is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can you do floor joint sealing in Inverkeithing?
Yes, Inverkeithing is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
Where is Mr Mastic based?
We are a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Why does the gap under my skirting keep coming back?
Floors and walls move a little with the seasons, and new floors settle. We close it with a flexible sealant that moves with the floor.
How long before the joint can take traffic?
We will tell you before we leave. It depends on the sealant, and walking on it normally comes before mopping or wheeled traffic.
Is there a guarantee?
Yes. All our work carries our 12-month guarantee.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often happy for the work to be arranged.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Different surfaces, different methods
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. We reseal them with a sealant suited to wet areas.
Thresholds
A threshold is where floors and frames meet. A flexible sealant suits both floor finishes.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.