West Berkshire · England
Inkpen Floor Joint Sealing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints in Inkpen, with a one-year guarantee on every job. Call for a quick quote.
- Caulk that has cracked where the floor moves
- Threshold joints that have opened or worn
- Dirt and water collecting in open floor joints
Your questions about floor joint sealing in Inkpen
Is Inkpen in your area for floor joint sealing?
Yes. We work across London and the South East, and Inkpen is part of that. You can ring 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear quote.
Do you cover smaller places like Inkpen?
Yes. Inkpen is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How long does floor joint sealing take?
As a guide, most jobs take a few hours, depending on the length of joint. Larger jobs naturally take longer, and we’ll tell you how long to expect.
Will I be able to paint over the new joint?
It depends on the sealant, so let us know first. Joints that will be painted get a paintable product, and silicone elsewhere.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all.
Can grout be replaced with sealant on a tiled floor?
Often, yes. Straight cracks in grout often show where a movement joint was needed. We replace that grout with a flexible joint.
Floor joint sealing for homes and businesses in Inkpen
Floor joint sealing is mostly about choosing the right product and preparing the joint. We remove what’s there first, then clean, back and seal the joint. If you have gaps opening between the floor and skirting and rigid edge joints in tiled floors, we can help, whatever the surface.
Around Inkpen, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.
We stand behind the work with a one-year guarantee.
- Where
- Inkpen (RG17)
- Wider area
- West Berkshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026

Also in Inkpen
What sealant work cannot fix
Some problems need a builder, plumber or other trade rather than us:
- Damaged concrete that needs breaking out and repairing
- Loose, hollow or cracked tiles, which need a tiler
- Subfloor problems that need a flooring contractor
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before booking.
What we seal
- Wet room & bathroom floors
- Thresholds
- Commercial floors
- Skirting boards
- Tiled floors
- Concrete floor joints
Landlord and commercial work in Inkpen
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
How the visit works
Every visit runs the same way: we check the joints, protect the area around them, carry out the job and tidy away. It generally takes a few hours for most rooms, longer for large commercial floors. In a small place like Inkpen, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, the floor type, the gap and the traffic are checked.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- The chosen sealant goes in, coloured to suit the floor.
- The joint is tooled neatly and the cure time explained.
How to prepare
- Let us know about parking restrictions
- Tell us about any water getting in
- Mention any sign-in or site rules at work premises
Ask for a quote
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will explain what’s involved and send you a clear quote.
Read more
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
How to look after the new joints
A little care helps the new joints last. We recommend:
- Do not slide heavy items over sealed joints
- Look at floor joints each spring
- Act on grout cracks that run in a straight line
- Keep caulk for dry, still joints only
Lift furniture rather than sliding it over sealed joints. Sharp edges can cut the sealant.
Once concrete joint edges start to break, wheels make it worse. Early resealing helps keep the joint intact and the floor safer.
New homes and floors in Inkpen
Across West Berkshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Managing a site like Inkpen Primary School? Then floor and threshold joints in busy corridors wear quickly and are best resealed early. If you look after a church, hall or community building such as Church of St Michael, joints in its floors, skirtings and thresholds need resealing as they wear. Rented homes near Kintbury station change hands often, and open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Inkpen is about 6 miles west of Newbury, in West Berkshire. Every kind of property in Inkpen is covered for floor joint sealing, old or new, large or small. Every job comes with our one-year guarantee. Inkpen is one of 155 towns and villages in West Berkshire we cover for floor joint sealing. You can also see our page for Reading, roughly 22 miles from Inkpen.
All of RG17 is covered for floor joint sealing, from the main roads to the quietest streets. Local streets include Folly Road, Post Office Road and Robins Hill, and we cover them all. Nearby, we also carry out floor joint sealing in Inkpen Common (1 mile south-east), Upper Green (1 mile south), Hell Corner (1 mile east), Lower Green (1 mile west) and Kintbury (2 miles north-east). Further out, we also cover Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (3 miles north-west), Lambourn (9 miles north) and Shaw (7 miles east).
Near you in Inkpen
We work in homes and buildings around Crown and Garter pub, among other places. Inkpen’s nearest station is Kintbury station, roughly 1.9 miles north-east of the centre. Well-known places in the area include Hamstead Marshall 3 (3.3 miles north-east). Green spaces nearby include Kintbury Newt Ponds and Inkpen Hill.
Surface by surface
Skirting boards
Skirting-to-floor joints are a regular job for us. We take out any cracked caulk before sealing.
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
How we quote for floor joint sealing
For a quick quote, just ask. What matters most is:
- How many rooms, windows or areas are involved
- Which sealant suits the joint
- How much there is to do
- Access and height
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
What to tell us for a quote
To help us quote quickly, let us know:
- Any access issues, like height or stairs
- Roughly how big the job is
- What the problem is, such as mould, gaps, leaks or cracking
- The address or postcode of the job
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.
