North Lanarkshire · Scotland
Floor & skirting joints in Glenboig, North Lanarkshire
Floor joint sealing across Glenboig and nearby, with every bit of old sealant taken out first.
- Skirting that has pulled away from the floor
- Threshold joints that have opened or worn
- Failed joint filler in concrete floors
Floor joint sealing in Glenboig, done properly
The gap under a skirting board often opens as floors and walls move with the seasons. Decorators’ caulk generally cracks where there’s movement, so we close it with a flexible sealant instead. We work on skirting boards, thresholds and commercial floors, and people most often call us about open joints around bathroom floor edges and threshold joints that have opened or worn.
New homes in smaller Scottish places are often single plots, self-builds or small developments. They need their sealant and floor joints finished just as carefully as on a big site.
We stand behind the work with a one-year guarantee.
- Place
- Glenboig (ML5)
- Region
- North Lanarkshire
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What happens if it’s left?
Dirt builds up in open joints. Sealed joints are easier to keep clean and look tidier. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
Why us?
- Sanitary silicone with an anti-fungal additive in wet areas
- A choice of colours where the product allows
- Neat joints and a tidy finish
- Experience in homes, commercial sites and hotels
See our cost guide or customer reviews.
What the job involves on each surface
Tiled floors
Tiled floors need movement joints at edges and across large areas. We replace grout with flexible sealant along the right lines coloured to suit.
Concrete floor joints
Open concrete joints chip at the edges when wheels cross them. Sealing them supports the edges and stops debris collecting.
Glenboig questions
Can you help a landlord with a rental near Gartcosh station?
Yes. We work for letting agents and landlords as well as homeowners. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear price.
Can you do floor joint sealing in Glenboig?
Yes, Glenboig is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and let us know what needs doing.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Can you add a movement joint to a tiled floor?
In many cases, yes. Where a floor needs one, we rake out grout along the right line and replace it with flexible sealant. Loose or cracked tiles need a tiler first.
Do you seal warehouse floor joints?
Yes. We reseal concrete floor joints in commercial and industrial units. We will talk through the traffic and choose a sealant suited to it.
Where are you based?
We’re based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all.
What we do, step by step
At the end, we look at the finished work together and explain the cure time. The visit itself generally takes a few hours for most rooms, longer for large commercial floors, depending on the size of the job. Somewhere like Glenboig may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied.
- Finally, we check the work and talk you through aftercare.
Getting ready for the visit
- Plan for the work area to be out of bounds to pets and children
- Let us know about earlier repairs to the joints
- Tell us if parking is tricky
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Related advice
Joints and finishes in Glenboig homes
Across North Lanarkshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that. Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up.
Rented homes near Gartcosh station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant. If you look after a church, hall or community building such as Church Of Scotland, floor and skirting joints in halls and kitchens wear like any others. For site and facilities teams at buildings such as Buchanan High School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Glenboig is about 3 miles north of Coatbridge, in North Lanarkshire. If you need floor joint sealing in Glenboig, please drop us a line at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover North Lanarkshire, Glenboig included. Across North Lanarkshire, we cover 89 places, Glenboig among them. There’s also a page for Glasgow, about 9 miles away.
Postcode districts we cover here for floor joint sealing: ML5. That includes homes and businesses on Main Street, Rockbank Crescent and Carrick Place. If you are just outside Glenboig, we cover Marnoch (1 mile west), Gartcosh (2 miles west), Muirhead (2 miles west), Coatbridge (3 miles south) and Bargeddie (3 miles south-west). We also work in nearby towns such as Motherwell (7 miles south), Cumbernauld (4 miles north-east), Airdrie (3 miles south-east), Wishaw (9 miles south-east), Bellshill (5 miles south) and Kilsyth (6 miles north).
Landmarks near Glenboig
Glenboig’s nearest station is Gartcosh station, about 1.5 miles west of the centre. A little further out are Monklands Hospital (2.5 miles south-east) and Glasgow Fort (4 miles south-west). Green spaces nearby include Gadloch and Bar Hill.
Keeping the joints in good condition
How long the joints last depends on use and care. Here’s what we suggest:
- Keep dirt out of the joints
- Cone off fresh joints until they’re ready
- Look at floor joints each spring
- Ask before painting over a sealed joint
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Cone off the area if needed while it cures.
Sealing a gap while it’s small is a quick job. Left alone, they collect dirt and widen.
What affects the quote in Glenboig
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The number of rooms or windows
- The number and length of the joints
- The product the joint needs
- When we can work, for business premises
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please drop us a line at info@mrmastic.co.uk and we will talk you through it.
Helping us quote
When you contact us, these details help:
- What the problem is, such as mould, gaps, leaks or cracking
- A few photos by email, if you can
- The type of property
- The rough size of the job
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, email us at info@mrmastic.co.uk.
When something else is needed
We’d rather tell you now than do work that will not last, so these are the limits:
- Bouncy or failing floorboards
- Cracked or broken concrete slabs
- Large cracks that need a surveyor
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
Joints and surfaces we work on
- Concrete floor joints
- Skirting boards
- Thresholds
- Tiled floors
- Wet room & bathroom floors
- Commercial floors
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.