Kent · England
Flete Floor Joint Sealing
Floor joint sealing across Flete and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Floor edges that trap water and grime
- Failed seals where bathroom floors meet baths and panels
- Gaps opening between the floor and skirting
What sealant work cannot fix
A few problems are outside what sealant work can do:
- Subfloor problems that need a flooring contractor
- Cracked or broken concrete slabs
- Loose, hollow or cracked tiles, which need a tiler
If you’re not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer.
Surfaces we seal
- Commercial floors
- Skirting boards
- Thresholds
- Concrete floor joints
- Wet room & bathroom floors
- Tiled floors
About our floor joint sealing in Flete
Thresholds are where two floors, or a floor and a door, meet. We use a flexible product that suits both floors so the joint stays neat. We work on wet room & bathroom floors, tiled floors and commercial floors, and people most often call us about skirting caulk that keeps splitting and worn sealant at door thresholds.
Work in a small place like Flete just needs the journey and access planning, and the work itself is the same as on any site.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Where
- Flete (CT9)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What the job involves on each surface
Skirting boards
Skirting pulls away from the floor as floors shrink and settle. We seal them with a flexible sealant rather than caulk painted or coloured to match.
Wet room and bathroom floors
Floor joints in bathrooms take water every day. We seal them with anti-fungal sanitary silicone.
How the visit works
You do not need to clear the whole room or building, just the space around the work. We protect the rest, and the job takes a few hours, depending on the length of joint in most cases. In a small place like Flete, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, the floor type, the gap and the traffic are checked.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
How to prepare
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
- Mention any parking rules near the property
Get a quote
We quote each job on its own. Simply phone 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
Read more
What affects the cost of floor joint sealing
There’s no set price list. The quote depends on:
- The type of sealant required
- The old material and how stubborn it is
- Mould in or behind the old joints
- When we can work, for business premises
What you pay reflects the work, not guesswork. That’s why we ask about the job first.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- Where the job is, and your postcode
- The type of property
- Any previous sealing or DIY work
- What the problem is, such as mould, gaps, leaks or cracking
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Landlord and commercial work in Flete
Landlords and letting agents in Flete can book us as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured for the work.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
A DIY attempt does not rule out a professional job. We cut it out and start again.
What happens if it’s left?
The right product depends on the floor and the traffic: flexible sealant for skirting and tiles, silicone in wet areas, and floor-joint products for concrete. Getting that choice wrong is a common reason joints fail. In a small place like Flete, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why book with us
- Trusted Arbo and Everbuild sealants
- A choice of colours where the product allows
- 20+ years of sealant experience
- Anti-fungal sanitary silicone in wet areas
Read our cost guide and what customers say.
More services for Flete
Floor joint sealing around Flete
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. That’s why the skirting and threshold joints need a flexible seal.
Schools such as St Gregory's Catholic Primary School are buildings too, and floor and threshold joints in busy corridors wear quickly and are best resealed early. If you let a flat or house near Margate station, a tidy floor and skirting joint helps a rental look ready for the next tenant. For buildings such as St. Catherine's Church, floor and skirting joints in halls and kitchens wear like any others.
Flete is about 1 mile south-west of Margate, in Kent. Anywhere in CT9, we can carry out floor joint sealing at your property. Across Kent, we cover 922 places, Flete among them. For nearby work, see our Chelmsford page, about 46 miles away.
We work across the CT9 postcode area for floor joint sealing. That includes homes and businesses on Victoria Road, Flete Road and Norfolk Road. If you’re just outside Flete, we cover Westwood (1 mile east), Haine (1 mile south-east), Manston (1 mile south), Garlinge (1 mile north-west) and Margate (1 mile north-east). Further out, we also cover Canterbury (14 miles south-west), Broadstairs (3 miles east), Whitstable (15 miles west), Deal (10 miles south), Herne Bay (10 miles west) and Walmer (11 miles south).
Local landmarks in Flete
We work in homes and buildings around Hartsdown Academy, among other places. For rail, the closest station is Margate station, about 1.5 miles north. Other landmarks nearby include Queen Elizabeth the Queen Mother Hospital (1.3 miles north-east) and Westwood Cross (1.1 miles east). Open spaces near Flete include Sandwich and Pegwell Bay.
Flete questions
Do you work for landlords with property near Margate station?
Yes. We work for letting agents and landlords as well as householders, and several properties can be quoted together. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear quote.
Is Flete in your area for floor joint sealing?
Yes. Our work covers London and the South East, and Flete is part of that. Just call 0345 464 0079 or email us with a few details of the job.
Why does the gap under my skirting keep coming back?
Floors and walls move a little with the seasons, and new floors settle. A flexible sealant closes the gap without cracking like caulk.
Where is Mr Mastic based?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
What does floor joint sealing cost?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before we start.
Do you have insurance?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
Can you use decorators’ caulk instead?
Only on dry joints that do not move. It splits once the floor shifts. A flexible sealant is the better choice.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.