West Sussex · England
Floor Joint Sealing in Fisher
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints in Fisher, with a one-year guarantee on every job. Call for a quick quote.
- Concrete floor joints that have broken down
- Floor edges that trap water and grime
- Gaps between floors and kitchen plinths
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Floor joint sealing for homes and businesses in Fisher
Concrete floors in warehouses and units have joints that take heavy wear. We reseal them with a product chosen for the movement and the traffic. Typical jobs include open joints around bathroom floor edges and dirt and water collecting in open floor joints, on concrete floor joints, thresholds and commercial floors.
In a village or hamlet like Fisher, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
Our work is backed for twelve months.

- Location
- Fisher (PO20)
- Wider area
- West Sussex
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
The process
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. It usually takes a few hours, depending on the length of joint. Somewhere as small as Fisher, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at the gap and the floor type and agree the right sealant.
- Old caulk, grout or sealant is removed from the joint.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- The sealant goes in, chosen for the floor and coloured to suit it.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
How to prepare
- Clear the area around the work
- Keep pets and children clear of the area while we work
- Mention any leaks or damp you’ve noticed
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, phone 0345 464 0079 or email us.
Related advice
Different surfaces, different methods
Thresholds
Threshold joints get a lot of feet, so we choose a hard-wearing, flexible product and neatly finished.
Tiled floors
Large or heated tiled floors need room to move. We replace grout with flexible sealant along the right lines in a matching colour.
Why it’s worth doing now in Fisher
Open joints along wet floors let water into the subfloor and behind skirting. Dealing with it early keeps the repair to the joint. Older cottages and farmhouses around Fisher can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Combining jobs into one visit generally makes better use of the time than several visits. We will send you a clear quote for the lot.
Why book with us
- Anti-fungal silicone where joints get wet
- Domestic, commercial and hotel work
- Trusted Arbo and Everbuild sealants
- Rated 4.9 stars on Google
Read our cost guide and what customers say.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Failed waterproofing under a wet room floor
- Movement too big for a sealant joint
- Bouncy or failing floorboards
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer before you book.
Where we work in Fisher
- Skirting boards
- Commercial floors
- Concrete floor joints
- Thresholds
- Wet room & bathroom floors
- Tiled floors
Towns and villages near Fisher
Other services in Fisher
Floor joint sealing in Fisher: local notes
Floors around West Sussex run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
For site and facilities teams at buildings such as Chichester High School For Girls, floor and threshold joints in busy corridors wear quickly and are best resealed early. Community buildings like St Leodegar's Church are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Fisher is about 3 miles south of Chichester, in West Sussex. From the centre of Fisher to the outskirts, floor joint sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Fisher is one of 371 towns and villages in West Sussex where we work for floor joint sealing. There’s also a page for Portsmouth, roughly 14 miles from Fisher.
All of PO20 is within our area for floor joint sealing, from the main roads to the quietest streets. Other places close to Fisher include South Mundham (1 mile east), Street End (1 mile south-west), Sidlesham Common (1 mile west), Sidlesham (2 miles south-west) and Nyetimber (2 miles south-east). We also work in nearby towns such as Bognor Regis (3 miles east), Chichester (3 miles north), Selsey (5 miles south), Littlehampton (10 miles east), Emsworth (9 miles north-west) and Rustington (11 miles east).
Near you in Fisher
The closest station to Fisher is Chichester station, about 2.5 miles north of the centre. A little further out are Chichester Cathedral Treasury (2.7 miles north) and Chichester Castle (3 miles north).
Keeping the joints in good condition
Looking after new joints is easy:
- Avoid sloshing water against skirting
- Lift furniture rather than dragging it across joints
- Keep caulk for dry, still joints only
- Look at floor joints each spring
Check the joints after the first winter. If anything has opened, it’s easy to reseal early on.
Concrete joints damaged by traffic get worse quickly. Early resealing helps keep the joint intact and the floor safer.
When to call us in Fisher
Floors and walls move a little with the seasons. In winter, with the heating on, timber dries and gaps open, then close again in damper months.
If you can see any of these, it’s time to have the joints looked at:
- Rigid edge joints in tiled floors
- Caulk that has cracked where the floor moves
- Dirt and water collecting in open floor joints
- Gaps opening between the floor and skirting
If you let a flat or house near Chichester station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
What your quote should include
- How much experience the applicator has
- What the quote includes, VAT included or not
- What preparation is included
- How long the guarantee is
Fisher questions
Do you cover smaller places like Fisher?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Is Fisher in your area for floor joint sealing?
Yes, Fisher is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we’re using and why.
Do you guarantee your work?
Yes, for a year. If anything is not right with the work within the year, let us know and we will sort it.
How long before the joint can take traffic?
It depends on the product and the conditions. We give you the times for walking, cleaning and traffic when we finish so there’s no guesswork.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
How long does floor joint sealing take?
A typical job takes a morning or an afternoon for most homes. Your quote will say how long we expect yours to take.
Will I be able to paint over the new joint?
Where you plan to paint, we do. Silicone doesn’t take paint so mention it when you get a quote.
