Surrey · England
Floor & skirting joints in Egham Wick, Surrey
Floor joint sealing in Egham Wick from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Open joints that fill with dirt
- Cracked caulk along skirting in bathrooms and kitchens
- Grout used at the floor edge instead of sealant
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Lift furniture rather than dragging it across joints
- Act on grout cracks that run in a straight line
- Keep caulk for dry, still joints only
- Cone off fresh joints until they’re ready
Don’t paint over silicone. If you plan to paint, we will use a paintable product.
Sealing a gap while it’s small is a quick job. Ignored, they fill with dirt and open further.
Floor joint sealing in Egham Wick, done properly
Across Egham Wick, we seal floor and skirting joints in homes and businesses. Each job starts with looking at the floor and the gap, because the right sealant depends on both. We work on wet room & bathroom floors, concrete floor joints and tiled floors, and people most often call us about caulk that has cracked where the floor moves and perimeter joints in tiled floors filled with grout.
Work in a small place like Egham Wick just needs the journey and access planning, and the work itself is the same as on any site.
We stand behind the work with a 12-month guarantee.
- Where
- Egham Wick (TW20)
- Wider area
- Surrey
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
When it isn’t the sealant
We’d rather tell you now than do work that won’t last, so these are the limits:
- Leaks from a failed tanking system
- Movement too big for a sealant joint
- Floors that are uneven or need levelling
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Concrete floor joints
- Thresholds
- Commercial floors
- Wet room & bathroom floors
- Tiled floors
- Skirting boards
Egham Wick questions
Will you come out to Egham Wick?
Yes, Egham Wick is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you cover Egham Wick for floor joint sealing?
Yes, Egham Wick is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and tell us what needs doing.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Do you offer different sealant colours?
We help you choose a colour that suits. The choice depends on the product the joint needs.
How long does the job take?
As a guide, most jobs take a morning or an afternoon for most homes. Bigger jobs take longer, and we will say how long yours will take.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Is the work guaranteed?
Yes. There’s a 12-month guarantee on every job, large or small.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Work for landlords, hotels and businesses
We work for landlords and letting agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
For anyone letting property in or around Egham Wick, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Signs you need floor joint sealing in Egham Wick
New floors settle once they’re in use. Gaps at the edges appear in the first year or so, and rigid fillers crack.
If you can see any of these, it’s time to have the joints looked at:
- Worn sealant at door thresholds
- Floor edges that trap water and grime
- Grout cracking in a straight line across a floor
- Skirting caulk that keeps splitting
Community buildings like Church of Saint Simon and Saint Jude are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Before you book anyone
- How the surfaces are prepared before sealing
- Whether they seal over old material or remove it
- What the cure time is
- What guarantee comes with the work
How we quote for floor joint sealing
Your quote is based on your job. We take into account:
- The old material and how stubborn it is
- The type of sealant required
- When we can work, for business premises
- Any mould that needs treating
The cost reflects the work involved, not guesswork. That is why we ask about the job first and agree the price before starting.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Any access issues, like height or stairs
- The type of property
- Roughly how big the job is
- Where the job is, and your postcode
There’s no standard price list. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or send us an email.
Why act early in Egham Wick
Putting new grout into a crack that keeps reappearing doesn’t last. The movement is still there, so the grout fails again. A flexible movement joint is the fix. Older cottages and farmhouses around Egham Wick can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller. If you are unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What you get with us
- Domestic, commercial and hotel work
- Rated 4.9 stars on Google
- Arbo and Everbuild products
- Old sealant always removed completely
Read our cost guide and our reviews.
New homes and floors in Egham Wick
Floors around Surrey run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Rented homes near Virginia Water station change hands often, and open skirting and floor joints collect dirt and water, so seal them while the property is empty. Schools such as St Cuthbert's Catholic Primary School are buildings too, and entrance and corridor floor joints take a lot of traffic.
Egham Wick is about 2 miles west of Egham, in Surrey. Our applicators cover floor joint sealing for householders, landlords and businesses in Egham Wick and the surrounding area, as part of our work across Surrey. We cover 395 towns and villages across Surrey, large and small. For nearby work, see our Reading page.
All of TW20 is within our area for floor joint sealing, from the main roads to the quietest streets. Streets in the area include Wick Lane and Wick Road, and we cover them all. Other places close to Egham Wick include Englefield Green (1 mile north-east), Bishopsgate (1 mile north), Wentworth (2 miles south), Stroude (2 miles south-east) and Virginia Water (2 miles south-east). Larger places within reach include Guildford (12 miles south), Woking (7 miles south), Camberley (9 miles south-west), Epsom (15 miles south-east), Ewell (15 miles east) and Walton-on-Thames (8 miles east).
Local landmarks in Egham Wick
We work in homes and buildings around Riverside Walk and The Barley Mow Public House and the streets around them. The closest station to Egham Wick is Virginia Water station, roughly 1.8 miles south-east of the centre. Well-known places in the area include Spelthorne Museum (3.2 miles east) and Windsor Castle (4.3 miles north). The countryside around Egham Wick includes Gracious Pond and St Ann's Hill.
How it works
On the day, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before work begins. The work usually takes a few hours for most rooms, longer for large commercial floors. For a village or hamlet like Egham Wick, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we check the joint and the floor and agree which sealant suits it.
- We take out any old caulk, sealant or grout along the line.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
Getting ready for the visit
- Clear items away from the joints we are working on
- Let us know about earlier repairs to the joints
- Try not to wet indoor joints just before the visit
Getting a quote
Every job is quoted individually, so start by telling us what you need. Simply phone 0345 464 0079 or drop us an email and describe the job.