Aberdeenshire · Scotland
Floor & skirting joints in Crimond, Aberdeenshire
We cover Crimond for sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Chipped and open joints in warehouse floors
- Gaps between floors and kitchen plinths
- Cracked grout where a tiled floor needs a movement joint
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Avoid caulk in bathrooms and kitchens
- Ask before painting over a sealed joint
- Keep heavy wheels off new concrete joints until cured
- Keep floor cleaning water to a minimum at the edges
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Cone off the area if needed while it cures.
Sealing a gap while it’s small is a quick job. Left alone, they collect dirt and widen over time.
About our floor joint sealing in Crimond
Floors move, and the joint where they meet a wall, skirting, threshold or another floor has to move with them. Skirting-to-floor gaps, tiled floor joints and concrete joints are all sealed with a sealant suited to the movement and traffic. We are often asked to deal with cracked grout where a tiled floor needs a movement joint and skirting caulk that keeps splitting, on thresholds, concrete floor joints and skirting boards.
New homes in smaller Scottish places are often single plots, self-builds or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
There’s a 12-month guarantee on every job, large or small.
- Where
- Crimond (AB43)
- Region
- Aberdeenshire
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What floor joint sealing looks like in Crimond
Across Aberdeenshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That’s why the skirting and threshold joints need a flexible seal. Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles.
For buildings such as Crimond Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Crimond is about 7 miles south-east of Fraserburgh, in Aberdeenshire. We provide floor joint sealing to homes and businesses in Crimond and nearby. Our area takes in 161 places across Aberdeenshire, from the larger towns to small villages. We also work in Aberdeen, around 32 miles away.
Jobs for floor joint sealing in AB43 works the same way as everywhere else we cover. You’ll find streets such as Logie Avenue East, Logie Road and The Row, all of which we cover. We also cover the places around Crimond: Keyhead (1 mile south-east), New Leeds (4 miles west), Kirktown (4 miles south-east), Rora (4 miles south) and St Fergus (4 miles south-east). We also work in nearby towns such as Peterhead (8 miles south-east), Fraserburgh (7 miles north-west), Roanheads (8 miles south-east), Clerkhill (8 miles south-east), Port Henry (8 miles south-east) and Mintlaw (6 miles south-west).
Local landmarks in Crimond
A little further out are Castle of Rattray (2.3 miles east). For a walk, there’s Loch of Strathbeg.
What affects the cost of floor joint sealing
Your quote is based on your job. We take into account:
- The number of rooms or windows
- When we can work, for business premises
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- What the problem is, such as mould, gaps, leaks or cracking
- Where the property is
- Photos by email, if that’s easy
- If someone has resealed it before
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you’re ready, email us at info@mrmastic.co.uk.
Leave it or put it right?
Left open, concrete joints break down under traffic. A sealed joint supports the edges. In a place like Crimond, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
The cost reflects the work involved, not guesswork. That is why we ask about the job first.
Why us?
- Fully insured
- 12-month guarantee on every job
- Sealant colour chosen to suit
- Domestic, commercial and hotel work
Questions from Crimond
Is there a guarantee on floor joint sealing in Crimond?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Do you cover Crimond for floor joint sealing?
Yes, Crimond is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear quote.
Are you insured?
Yes. Full insurance covers our work.
Why does the gap under my skirting keep coming back?
Floors and walls move a little with the seasons, and new floors settle. We close it with a flexible sealant that moves with the floor.
Can you use decorators’ caulk instead?
Because caulk cracks where there’s movement or water. Floor edges move through the year, so we use a flexible sealant that stretches.
What does floor joint sealing cost?
Size, access and the old material all affect the cost. Call for a quick quote and we’ll talk you through it.
Do you seal kitchen plinths to the floor?
Yes. Where a floor meets a bath panel, kitchen plinth or skirting in a wet area, we use a flexible silicone.
Can I do it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
What else we do in Crimond
The process
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a morning or an afternoon for most homes. Somewhere like Crimond may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, the floor type, the gap and the traffic are checked.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- The chosen sealant goes in, coloured to suit the floor.
- The joint is tooled neatly and the cure time explained.
Preparing for the visit
- Mention if the joints have been sealed before
- Tell us if parking is tricky
- For business premises, tell us about site rules or sign-in
Ask for a quote
We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details and send pictures if you have them.
Advice
Common problems we fix in Crimond
Some floors were never given a perimeter gap or movement joint. It pushes against the walls and skirting as it expands and joints fail.
Signs it’s time to call us include:
- Threshold joints that have opened or worn
- Open gaps along the bottom of skirting boards
- Failed joint filler in concrete floors
- Grout cracking in a straight line across a floor
Around Crimond, as everywhere, floor joint sealing is only as good as the preparation behind it.
What to look for in a quote
- Whether the sealant suits the joint
- How long the guarantee is
- How long to leave it before use
- How hidden problems are handled
What sealant work cannot fix
We will always be straight with you, so here’s what sealant can’t fix:
- Cracked or broken concrete slabs
- Tiles that have lifted or broken
- Bouncy or failing floorboards
If in doubt, email us at info@mrmastic.co.uk and we will say what we think.
What we seal
- Skirting boards
- Wet room & bathroom floors
- Concrete floor joints
- Tiled floors
- Thresholds
- Commercial floors
Should I try it myself first?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.