Glasgow · Scotland
Floor & skirting joints in Colston, Glasgow
Floor joints in Colston need attention? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Failed joint filler in concrete floors
- Gaps opening between the floor and skirting
- Perimeter joints in tiled floors filled with grout
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Get cracks along tile grout lines looked at early
- Keep caulk for dry, still joints only
- Walk round the room once a year and look at the edges
- Don’t paint over silicone
Have a look at the joints once the heating season is over. If anything has opened, it’s easy to reseal.
Once concrete joint edges start to break, wheels make it worse. Sealing them early protects the edges and the surface smoother.
Floor joint sealing for homes and businesses in Colston
The gap under a skirting board often opens as floors and walls move with the seasons. Decorators’ caulk usually cracks where there’s movement, so we close it with a flexible sealant instead. We work on wet room & bathroom floors, commercial floors and skirting boards, and people most often call us about grout used at the floor edge instead of sealant and open joints around bathroom floor edges.
Scotland’s cities are still adding new flats and houses, and in new homes, sealant and floor joints are often among the first snags, in Colston as anywhere.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Location
- Colston (G64, G22, G21)
- Region
- Glasgow
- Cover
- One year on every job
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What sealant work can’t fix
A few problems are outside what sealant work can do:
- Floors that are uneven or need levelling
- Movement too big for a sealant joint
- Cracked or broken concrete slabs
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.
Surfaces we seal
- Commercial floors
- Concrete floor joints
- Wet room & bathroom floors
- Skirting boards
- Thresholds
- Tiled floors
What we do, step by step
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for most rooms, longer for large commercial floors. Parking in city streets around Colston can be tight or controlled, so it helps to know about permits or nearby bays. For flats, mention the door entry system and any shared-stair arrangements.
- The room is cleared along the joints so we can reach them.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- A flexible sealant suited to the floor is applied and tooled.
- We check the joints and explain the aftercare.
Before we arrive
- Tell us about any water getting in
- On commercial sites, let us know about site rules
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Read more
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
How the job changes by surface
Wet room and bathroom floors
Wet room floors rely on sound joints at the walls. We reseal it with a flexible silicone suited to wet areas and we’ll say if the problem looks like more than the joint.
Skirting boards
On painted skirting, we can use a flexible sealant that takes paint. In wet rooms and kitchens, silicone is usually better.
Other services in Colston
Joints and finishes in Colston homes
Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up. Across Glasgow, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
If you look after a church, hall or community building such as Colston Wellpark Church, joints in its floors, skirtings and thresholds need resealing as they wear. If you let a flat or house near Bishopbriggs station, a tidy floor and skirting joint helps a rental look ready for the next tenant. Schools such as Bishopbriggs Academy are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Colston is about 1 mile south-west of Bishopbriggs, in Glasgow. We carry out floor joint sealing for householders, landlords and businesses in Colston, as part of our work across Glasgow. Our area takes in 183 places across Glasgow.
Postcode districts we cover here for floor joint sealing: G64, G22 and G21. Floor joint sealing is available to properties on Avon Road, Ashgill Road and Leehill Road. We also cover the places around Colston: Stobhill (1 mile south-east), Milton (1 mile west), Parkhouse (1 mile south-west), Auchinairn (1 mile east) and Huntershill Village (1 mile south-east). We also work in nearby towns such as Glasgow (3 miles south-west), Hillhead (3 miles south-west), Dowanhill (3 miles south-west), Woodlands (3 miles south-west), Partickhill (3 miles south-west) and Garnethill (3 miles south-west).
Local landmarks in Colston
Locally, jobs take us to homes and businesses close to Springburn Park. The closest station to Colston is Bishopbriggs station, about 0.5 miles north-east. Nearby you’ll also find Chinatown (2.3 miles south-west) and Bishop's Castle (2.5 miles south). The countryside around Colston includes Lenzie Moss and Hogganfield Loch.
Landlords, agents and businesses in Colston
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We work for letting agents and landlords as well as householders. Sealant work between tenants keeps a property looking cared for.
How we quote for floor joint sealing
Your quote is based on your job. We look at:
- The type of sealant required
- The old material and how stubborn it is
- The number of rooms or windows
- Access and height
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
When you contact us, these details help:
- Whether it’s a home or a business
- Whether it has been sealed before
- Access, such as stairs, a lift or height
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, email us at info@mrmastic.co.uk.
FAQs for Colston
I let a flat near Bishopbriggs station. Can you help?
Yes, landlords and agents are among the people we work for. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.
Do you cover Colston for floor joint sealing?
Yes, Colston is within the area we cover. Our work covers the whole of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Why has a gap opened under my skirting?
Floors and walls move a little with the seasons, and new floors settle. We close it with a flexible sealant that moves with the floor.
How do I get a quote for floor joint sealing in Colston?
Every job is different, so each one gets its own quote. To get one, email us at info@mrmastic.co.uk with a short description of the job.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Do you work on commercial floors?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Tell us what runs over the floor when you ask for a quote.