Surrey · England
Floor & skirting joints in Capel, Surrey
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Capel and across Surrey. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Caulk that has cracked where the floor moves
- Floor edges that trap water and grime
- Gaps opening between the floor and skirting
What sealant work can’t fix
New sealant cannot fix everything, and we will tell you before work begins. Sealant will not put right:
- Large cracks that need a surveyor
- Bouncy or failing floorboards
- Cracked or broken concrete slabs
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly.
What we seal
- Commercial floors
- Skirting boards
- Thresholds
- Tiled floors
- Wet room & bathroom floors
- Concrete floor joints
Floor joint sealing for homes and businesses in Capel
Thresholds are where two floors, or a floor and a door, meet. We seal them with a flexible sealant suited to the floor finishes either side. We’re often asked to deal with grout used at the floor edge instead of sealant and cracked grout where a tiled floor needs a movement joint, across skirting boards, commercial floors and wet room & bathroom floors.
Older homes in small places like Capel often have timber floors that move with the seasons, so skirting and threshold joints need a flexible sealant rather than a rigid filler.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Capel (RH5)
- Region
- Surrey
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Nearby places to Capel
What else we do in Capel
Quotes for floor joint sealing in Capel
The quote reflects the job in front of us. We look at:
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- Access and height
- The number and length of the joints
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
- The rough size of the job
- If someone has resealed it before
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.
New homes and floors in Capel
Across Surrey, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
For site and facilities teams at buildings such as Scott Broadwood CofE Infant School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. For landlords with property near Ockley station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
Capel is about 5 miles south of Dorking, in Surrey. Our applicators cover floor joint sealing for homes and businesses in Capel and nearby, as part of our work across Surrey. Across Surrey, we cover 395 places, and Capel is one of them. There’s also a page for Crawley, about 6 miles away.
Work in RH5 works the same way as everywhere else we cover. If you need floor joint sealing at a property on The Street, Laundry Way and Bakers Way or anywhere close by, we can help. Other places close to Capel include Ockley (2 miles west), Beare Green (2 miles north), Paynes Green (2 miles south-west), Kingsfold (2 miles south) and Holmwood Corner (3 miles north). Further out, we also cover Guildford (13 miles north-west), Epsom (13 miles north), Horley (7 miles east), Redhill (9 miles north-east), Ewell (14 miles north) and Reigate (8 miles north-east).
Local landmarks in Capel
For rail, the closest station is Ockley station, about 0.6 miles west. Other landmarks nearby include Horsham Hospital (5.6 miles south). Open spaces near Capel include Leith Hill and Warnham LNR.
When to call us in Capel
When a tiled floor has no movement joints, the grout takes the strain. Cracks often run straight along a line of joints, showing where a movement joint was needed.
Most people get in touch after spotting one of these:
- Threshold joints that have opened or worn
- Grout cracking in a straight line across a floor
- Failed seals where bathroom floors meet baths and panels
- Chipped and open joints in warehouse floors
Community buildings like Church of St John the Baptist are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Questions to ask before you book
- Whether the sealant suits the joint
- Whether they’re fully insured
- How the colour is chosen
- Whether they seal over old material or remove it
For landlords and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Different surfaces, different methods
Tiled floors
Perimeter joints in tiled floors should be sealant, not grout. We rake out any grout there and reseal.
Wet room and bathroom floors
Floor joints in bathrooms take water every day. They’re sealed with a flexible, anti-fungal silicone that keeps water out.
Questions from Capel
Can you help a landlord with a rental near Ockley station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear quote.
Is Capel in your area for floor joint sealing?
Yes, Capel is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
Can you reseal concrete floor joints in an industrial unit?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Let us know about the traffic.
How long will you be here?
It depends on the size of the job, but as a guide it takes a morning or an afternoon for most homes. We will give you a better idea when we quote.
Are you fully insured?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
Where is Mr Mastic based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
How much does floor joint sealing cost in Capel?
It depends on the job, so we quote each one individually. For a quick quote, call 0345 464 0079 or send us an email with a short description of the job.
What we do, step by step
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. It normally takes a few hours, depending on the length of joint. Somewhere like Capel needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- The joint is vacuumed clean and backing fitted where needed.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Let us know about earlier repairs to the joints
- Let us know about stairs, lifts or work at height
How to get a quote
Every job is quoted individually, so the first step is telling us about yours. Simply call 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
Related advice
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.