Buckinghamshire · England
Fire Rated Sealant in Walter's Ash
Our applicators work in Walter's Ash on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Ordinary sealant used where a fire-rated product was needed
- Fire seals that have cracked with movement
- Sealant items on a fire risk assessment action list
How we handle fire rated sealant in Walter's Ash
Ordinary silicone or decorators’ caulk in a fire-stopping gap is not a fire-rated seal. Anything unsuitable comes out first and the gap is resealed with a product tested for that use. We work on door frames, flats & HMOs and pipe & cable gaps, and people most often call us about unsealed gaps where pipes and cables go through a wall and open gaps behind door architraves.
For a small place like Walter's Ash, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
Each job carries a 12-month guarantee.
- Location
- Walter's Ash (HP14)
- Region
- Buckinghamshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Keeping the joints in good condition
So the new joints stay in good condition:
- Look in service cupboards and ceiling voids from time to time
- Tell trades working in the building that fire seals must be put back
- Keep pictures of seals that will be hidden
- Check whether a sealant can be painted before decorating over it
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint and we will tell you which one you have.
Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
Workplaces and buildings in Walter's Ash
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Rented homes near Saunderton station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. If you look after a building such as Naphill and Walters Ash School, service openings in fire-resisting walls need checking after any refurbishment.
Walter's Ash is about 4 miles north-west of High Wycombe, in Buckinghamshire. We provide fire rated sealant to homeowners, landlords and businesses in Walter's Ash and nearby, as part of our work across Buckinghamshire. We cover 263 towns and villages across Buckinghamshire. We also work in Reading, about 18 miles from Walter's Ash.
Here we cover the HP14 postcode area for fire rated sealant. Streets in the area include Main Road, Honey Way and Bradenham Wood Lane, all of which we cover. Neighbouring places we cover for fire rated sealant include Naphill (1 mile south-east), Upper North Dean (1 mile north-east), Lower North Dean (1 mile east), Speen (1 mile north) and Bryant's Bottom (1 mile north-east). Within a short drive, we also cover Aylesbury (10 miles north), High Wycombe (4 miles south-east), Chesham (8 miles east), Marlow (7 miles south), Amersham (8 miles east) and Beaconsfield (8 miles south-east).
What’s near Walter's Ash
In Walter's Ash, that means homes and buildings near The Wheel pub, among other places. For rail, the closest station is Saunderton station, roughly 1.5 miles west of the centre. A little further out are Wycombe Hospital (3.7 miles south-east) and High Wycombe Castle (3.5 miles south-east). The countryside around Walter's Ash includes Prestwood Local Nature Reserve.
Landlord and commercial work in Walter's Ash
We work for landlords and letting agents as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can go on one quote.
Places near Walter's Ash
What else we do in Walter's Ash
Walter's Ash questions
I let a flat near Saunderton station. Can you help?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before any work starts.
Is Walter's Ash within the area you cover?
Yes, Walter's Ash is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you fill the gap behind a fire door frame?
Yes, where the gap suits a sealant detail. We seal the frame-to-wall gap, not the door itself.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. If you need photos or a set layout, ask when you get a quote.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Is intumescent sealant the same as fire-rated sealant?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent ones swell in heat, and they’re one of the options. We use whichever the specification and tested details call for.
Is it worth trying it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Honest limits
To be straight with you, some problems need a different trade:
- Fire risk assessments, which need a qualified assessor
- Fire doors that need new seals, closers or hardware
- Big openings where sealant alone is not the tested solution
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Joints and surfaces we work on
- Service penetrations
- Door frames
- Linear gaps
- Plasterboard & masonry
- Pipe & cable gaps
- Flats & HMOs
How the visit works
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes from a few hours to a few days, depending on the number of gaps and the access from start to finish. In a small place like Walter's Ash, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Clear the area around the work
- Mention any leaks or damp you’ve noticed
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To arrange one, phone 0345 464 0079 or drop us an email.
Read more
Common problems we fix in Walter's Ash
Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole they leave doesn’t always get resealed.
The problems people generally mention when they call are:
- Gaps where walls meet ceilings or slabs
- Sealant items on a fire risk assessment action list
- Fire seals that have cracked with movement
- Open holes round services passing through fire walls
For buildings such as Church of St Botolph, service openings in its walls need the right fire-rated sealant, as in any building.
Before booking anyone
- What the quote includes, VAT included or not
- How long the guarantee is
- Whether they’re fully insured
- What happens if they find a problem under the old sealant
Why act early in Walter's Ash
Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, so we follow the maker’s details on every gap. Where a wall is exposed, as many are in small places like Walter's Ash, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we will go through it with you.
Why us?
- One-year guarantee on every job
- ARBOMaster approved applicator
- 4.9 on Google from 180+ five-star reviews
- More than 20 years in sealant work
See our cost guide or customer reviews.
What the job involves on each surface
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Where a hole is bigger than the sealant’s tested range, it needs another approach, and we’ll tell you.
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.