Buckinghamshire · England
Fire Rated Sealant in Tyler's Hill
Our applicators work in Tyler's Hill on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Gaps flagged on a fire risk assessment
- Fire seals that have cracked with movement
- Damaged fire sealant left by other trades
When it is not the sealant
It helps to know what we can’t do:
- Fire doors that need new seals, closers or hardware
- Sign-off of the building, which sits with building control or your assessor
- Deciding what fire stopping a building needs
If you’re not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Plasterboard & masonry
- Pipe & cable gaps
- Door frames
- Linear gaps
- Service penetrations
- Flats & HMOs
About our fire rated sealant in Tyler's Hill
We can work through a building room by room or floor by floor, with each location and product recorded. It gives you a list to keep with the building’s fire safety documents. If you’re dealing with open holes round services passing through fire walls and linear gaps at the head of walls, we can put it right, whatever the surface.
For holiday lets, converted business premises or a community building near Tyler's Hill, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Tyler's Hill (HP5)
- Region
- Buckinghamshire
- Cover
- One year on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Why act early in Tyler's Hill
Items left open on a fire risk assessment tend to come back at the next review. Getting them done and written up gives you evidence that the item was dealt with. Where a wall is exposed, as many are in small places like Tyler's Hill, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, call 0345 464 0079 or email us for an honest opinion and a quote.
Why choose Mr Mastic in Tyler's Hill
- Anti-fungal silicone where joints get wet
- We never seal over old sealant
- Rated 4.9 stars on Google
- Domestic, commercial and hotel work
How we quote for fire rated sealant
We do not publish a price list, because no two jobs are the same. What we look at:
- Any mould that needs treating
- The number of rooms or windows
- Working hours on commercial sites
- How easy the joints are to reach
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What to tell us for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Whether it has been sealed before
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
- Where the job is, and your postcode
Asking for a quote is easy: tell us what needs doing and where and its rough size. Photos by email help us understand the job.
Landlords, agents and businesses in Tyler's Hill
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Letting agents and landlords in Tyler's Hill can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.
Commercial buildings in Tyler's Hill
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Managing a site like Ley Hill School? Then gaps opened by contractors for new cabling are a common finding in schools and offices. Letting a property close to Amersham station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like St George's Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Tyler's Hill is about 1 mile east of Chesham, in Buckinghamshire. From the centre of Tyler's Hill to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Across Buckinghamshire, we cover 263 places, and Tyler's Hill is one of them. There’s also a page for London, roughly 25 miles from Tyler's Hill.
Postcode districts we cover here for fire rated sealant: HP5. If you need fire rated sealant at a property on Broomstick Lane, Tylers Hill Road and Goose Acre or a nearby road, our applicators can take on the job. Other places close to Tyler's Hill include Botley (1 mile north), Ley Hill (1 mile east), Lye Green (1 mile north), Orchard Leigh (1 mile north) and Bovingdon (2 miles north-east). We also work in nearby towns such as Aylesbury (13 miles north-west), High Wycombe (9 miles south-west), Marlow (12 miles south-west), Beaconsfield (7 miles south-west), Chalfont St Peter (7 miles south) and Elmhurst (13 miles north-west).
Landmarks near Tyler's Hill
In Tyler's Hill, that means homes and buildings near Chesham Grammar School and The Crown pub. The nearest railway station is Amersham station, about 2.5 miles south-west of the centre. Well-known places in the area include Amersham Fair Organ Museum (2 miles south) and Hawridge Court (3.2 miles north-west). The countryside around Tyler's Hill includes Sands Bank.
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Tyler's Hill needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- On commercial sites, let us know about site rules
- For indoor joints, keep the area dry beforehand if you can
- Tell us about access, such as stairs, a lift or high-level joints
Ask for a quote
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Related advice
Towns and villages near Tyler's Hill
More services for Tyler's Hill
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Looking after it afterwards
So the new joints stay in good condition:
- Ask every contractor to reseal any fire stopping they disturb
- Ask which product was used before you paint
- Take photos of fire stopping before ceilings or boxing go back
- Never patch a fire seal with standard sealant
Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the list grows.
FAQs for Tyler's Hill
Will you come out to Tyler's Hill?
Yes, Tyler's Hill is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Amersham station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or email us with the details for a clear quote.
Do you do fire sealant around door frames?
Yes. Gaps behind architraves are a common job for us. Doors, seals and closers need a door specialist.
Can ordinary silicone be used in a fire-stopping gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use.
Do you work in flats, HMOs and commercial buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we will plan the work to suit.
What fire rating will the seal have?
We do not give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we apply a product tested for it, recording the locations and products.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme.