Hampshire · England
Fire Rated Sealant in Toothill
Our applicators work in Toothill on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Open joints along the top of partitions
- Open gaps behind door architraves
- Ordinary sealant used where a fire-rated product was needed
Fire rated sealant in Toothill
Intumescent sealant looks much like any other sealant until it gets hot; then it swells to help close the gap. The right product depends on the gap size, the substrate and what passes through. If you have unsealed gaps around fire door frames and standard silicone or caulk in a fire-stopping gap, we can help.
If you have holiday lets, a converted barn used for business or a community building near Toothill, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Your job is guaranteed for a year, as with all our work.
- Location
- Toothill (SO51)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Surface by surface
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We fill it with a fire-rated product suited to the materials either side.
Flats and HMOs
Converted houses often have gaps around old and new services. We seal the ones on your specification with a tested product.
FAQs for Toothill
Do you work for landlords with property near Romsey station?
Yes. We work for landlords and agents as well as homeowners, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover smaller places like Toothill?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can I choose the sealant colour?
Most of the time, yes. We’ll tell you which colours the right product comes in.
Where are you based?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Can I use normal mastic around a pipe through a fire wall?
No. A gap that needs fire stopping needs a tested fire-rated product.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. Indoors, that usually means someone at home.
What should I tell you?
Just the basics: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or email us.
How much does fire rated sealant cost in Toothill?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
Honest limits
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Doors that are not fire doors in the first place
- Issuing a fire rating or certificate for a building
- Construction that doesn’t provide fire resistance on its own
If you’re not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer.
Where we work in Toothill
- Plasterboard & masonry
- Door frames
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Linear gaps
Landlords, agents and businesses in Toothill
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
What fire rated sealant looks like in Toothill
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For site and facilities teams at buildings such as The Mountbatten School, fire-stopping around service openings should be restored whenever new services go in. For buildings such as Church of St John, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Romsey station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Toothill is about 2 miles south of Romsey, in Hampshire. If you need fire rated sealant in Toothill, it’s easy to get a quote: please phone 0345 464 0079 or email us. We cover Hampshire from our Crawley base, Toothill included. Our Hampshire coverage runs to 683 places, and Toothill is one of them.
Here we cover the SO51 postcode area for fire rated sealant. Other places close to Toothill include Ashfield (1 mile west), Upton (1 mile south), Lee (1 mile west), Rownhams (1 mile south-east) and North Baddesley (1 mile north-east). We also work in nearby towns such as Winchester (9 miles north-east), Eastleigh (5 miles east), Fareham (14 miles south-east), Totton (4 miles south-west), Chandler's Ford (4 miles north-east) and Hedge End (8 miles south-east).
What’s near Toothill
For rail, the closest station is Romsey station, about 2.3 miles north-west of the centre. A little further out are Romsey Community Hospital (2.1 miles north) and King Johns House (2.4 miles north-west). For a walk, there’s Emer Bog and Baddesley Common.
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Check whether a sealant can be painted before decorating over it
- Never patch a fire seal with standard sealant
- Look in service cupboards and ceiling voids from time to time
- Take photos of fire stopping before ceilings or boxing go back
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
An open gap is not only a fire issue: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- The old material and how stubborn it is
- How much there is to do
- Working hours on commercial sites
- The type of sealant required
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Helping us quote
When you contact us, these details help:
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
- Any previous sealing or DIY work
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Toothill, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Getting ready for the visit
- Keep children and pets away from the work area
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about earlier repairs to the joints
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and send you a clear quote.