West Berkshire · England
Fire Rated Sealant in Theale
Our applicators work in Theale on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly.
- Door frames with gaps between frame and wall
- Holes left by a change of layout
- Fire stopping disturbed by later work
Common questions in Theale
Do you cover Theale for fire rated sealant?
Yes, Theale is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
Do you cover smaller places like Theale?
Yes. Theale is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or drop us an email.
Can you tell me how many minutes the seal will last?
We do not certify fire stopping or quote ratings. Our part is installing the specified product to its tested details and giving you a record of where it went.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Many fire-rated sealants work this way, but not all.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Do you seal gaps around fire door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself, and we will mention anything we notice about the door.
How we handle fire rated sealant in Theale
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. Typical jobs include unsealed gaps around fire door frames and joints picked up in a fire-stopping survey, across door frames, pipe & cable gaps and flats & HMOs.
Commercial work around a smaller place like Theale normally means a pub, a shop, a school or small business units rather than office blocks. Each needs the same care with its sealant as any larger building.
Every job comes with our one-year guarantee.
- Where
- Theale (RG7)
- Wider area
- West Berkshire
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What fire rated sealant looks like in Theale
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Church of the Holy Trinity, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Theale station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Theale is about 4 miles west of Reading, in West Berkshire. If you need fire rated sealant in Theale, please phone 0345 464 0079 or email us for a quick quote. We’re based in Crawley and cover West Berkshire, Theale included. We cover 155 towns and villages across West Berkshire.
Here we cover the RG7 postcode area for fire rated sealant. If you need fire rated sealant at a property on Station Road, High Street and Bath Road or anywhere close by, our applicators can take on the job. Close by, we work in Sheffield Bottom (1 mile south-east), Englefield (1 mile north-west), Calcot (1 mile east), Beansheaf Farm (1 mile east) and Trash Green (2 miles south-east). Larger places within reach include Newbury (11 miles west), Thatcham (8 miles west), Burghfield Common (3 miles south), Speenhamland (11 miles west), Spencers Wood (5 miles south-east) and Shaw (10 miles west).
Around Theale
In Theale, that means homes and buildings near Theale Green Community School, Red Lion pub and Calcot Park, among other places. There’s a railway station in Theale itself: Theale station. Well-known places in the area include Battle Hospital (3.8 miles north-east) and Thames Valley Police Museum (1.2 miles south). Green spaces nearby include Hosehill Lake and Moor Copse Nature Reserve.
Places near Theale
What else we do in Theale
When something else is needed
It helps to know what we cannot do too:
- Big openings where sealant alone is not the tested solution
- Construction that does not provide fire resistance on its own
- Deciding what fire stopping a building needs
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Plasterboard & masonry
- Door frames
- Flats & HMOs
- Linear gaps
- Service penetrations
- Pipe & cable gaps
Why deal with it now?
Squirting in whichever sealant is nearest doesn’t make a fire seal. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. In a smaller place like Theale, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
Why us?
- Fully insured
- Every job guaranteed for a year
- Neat joints and a tidy finish
- Over 20 years’ experience
Take a look at how sealant jobs are priced and our reviews.
What the job involves on each surface
Service penetrations
New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth over any backing the detail calls for.
Flats and HMOs
Conversions usually leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product and record where they are.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Keep pictures of seals that will be hidden
- Tell trades working in the building that fire seals must be put back
- Check risers, ceiling voids and cupboards during building checks
- Get damaged fire seals looked at promptly
Do not add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. We can tell you which product we used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is usually a straightforward job.
What happens on the day
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. In a smaller place like Theale, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Move anything stored near the joints
- Let us know about parking restrictions
How to get a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
Common problems we fix in Theale
Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole they leave does not always get resealed.
If you can see any of these, it’s time to have the joints looked at:
- Fire seals that have cracked with movement
- Ordinary sealant used where a fire-rated product was needed
- Damaged fire sealant left by other trades
- Linear gaps at the head of walls
For site and facilities teams at buildings such as Theale C.E. Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Comparing quotes
- When the joint can take water or movement
- Are they insured?
- Whether VAT is included
- What happens if the job turns out different