West Berkshire · England
Fire-rated sealant in Sheffield Bottom, West Berkshire
Problem with your fire-stopping gaps in Sheffield Bottom? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Open gaps behind door architraves
- Seals cut through by electricians, plumbers or data installers
- Old fire sealant that has split or come away
Fire rated sealant for homes and businesses in Sheffield Bottom
We often work from an action list drawn up by a fire risk assessor for buildings in Sheffield Bottom. Send us the list or the survey and we will quote for the fire-rated sealant work on it. Typical jobs include unsealed gaps around fire door frames and ordinary sealant used where a fire-rated product was needed, across plasterboard & masonry, service penetrations and linear gaps.
Work in a small place like Sheffield Bottom is planned ahead, journey included, so it can be fitted around guests, customers or events where possible.
We stand behind the work with a 12-month guarantee, so you’re covered after we’ve gone.
- Where
- Sheffield Bottom (RG7)
- Region
- West Berkshire
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
After the cure time, these simple habits help:
- Photograph sealed gaps before they’re covered up
- Store the list of sealed gaps with your building paperwork
- Don’t paint over fire sealant until it has cured
- Keep general-purpose foam and caulk away from fire-stopping gaps
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
An open gap is not only a fire issue: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Signs you need fire rated sealant in Sheffield Bottom
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
The most common problems we see are:
- Gaps filled with a product that is not fire-rated
- Old fire sealant that has split or come away
- Holes left by a change of layout
- Damaged fire sealant left by other trades
Schools such as Theale C.E. Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Comparing quotes
- Who does the work, and how experienced they are
- How the joint is cleaned and prepared
- What happens if they find a problem under the old sealant
- How long the guarantee is
Places near Sheffield Bottom
What else we do in Sheffield Bottom
Fire rated sealant around Sheffield Bottom
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of the Holy Trinity are part of the picture too: gaps around pipes and cables are worth checking after any building work there. For landlords with property near Theale station, any gap left by new services in shared walls should be closed with a fire-rated product.
Sheffield Bottom is about 4 miles south-west of Reading, in West Berkshire. Whether you are in the middle of Sheffield Bottom or further out, fire rated sealant is available for homes and businesses alike. Our West Berkshire coverage runs to 155 places, and Sheffield Bottom is one of them.
Work in RG7 is quoted and booked the same way as anywhere else. That includes homes and businesses on Deans Copse Road and Moulden Way. We also cover the places around Sheffield Bottom: Trash Green (1 mile south-east), Theale (1 mile north-west), Sulhamstead Bannister Upper End (1 mile south-west), Burghfield (1 mile south-east) and Sulhamstead (1 mile south-west). We also work in nearby towns such as Newbury (11 miles west), Thatcham (8 miles west), Speenhamland (11 miles west), Spencers Wood (5 miles south-east), Shaw (11 miles west) and Kingsclere (10 miles south-west).
Local landmarks in Sheffield Bottom
Locally, jobs take us to homes and businesses close to Theale Green Community School, Fox & Hounds pub and Theale Green Community School, among other places. For rail, the closest station is Theale station, roughly 0.7 miles north-west. Nearby you’ll also find Battle Hospital (3.8 miles north-east) and Thames Valley Police Museum (0.6 miles south-west). For a walk, there’s Hosehill Lake and Moor Copse Nature Reserve.
Surface by surface
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length leaving no stretch unsealed.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing so the seal has something sound to bond to.
How it works
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. It generally takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Sheffield Bottom needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Tell us if parking is tricky
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
Get a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.
Advice
For landlords and businesses
For anyone letting property in or around Sheffield Bottom, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
We work for letting agents and landlords as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
How we quote for fire rated sealant
Every job gets its own quote. These are the things that affect it:
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- The number of rooms or windows
- The size of the job
The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. We give a clear quote before any work starts.
Asking for a quote
To make quoting easier, please include:
- If someone has resealed it before
- A few pictures by email, if you can
- What’s wrong with the joints now
- The type of property
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved.
Your questions about fire rated sealant in Sheffield Bottom
I let a flat near Theale station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Is Sheffield Bottom within the area you cover?
Yes, Sheffield Bottom is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you hold any approvals?
Yes. We are an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
Can ordinary silicone be used in a fire-stopping gap?
No. Standard sealants aren’t made or tested to stop fire. If it’s been used, we remove it and use the right product.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you don’t need to watch us work.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
What do you need from me for a quote?
A short description and the location, with photos by email if possible. We’ll ask anything else we need to know.