Kent · England

Fire Rated Sealant in Stone Hill

Specialist fire rated sealant for Stone Hill: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Gaps left after a refit or conversion
  • Seals cut through by electricians, plumbers or data installers
  • Unsealed gaps around fire door frames

Book fire rated sealant in Stone Hill

Fire rated sealant in Stone Hill: local notes

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.

Managing a site like Sellindge Primary School? Then service openings in fire-resisting walls need checking after any refurbishment. If you look after a church, hall or community building such as Church of St Mary, older buildings that have had new heating or wiring often have service gaps worth checking.

Stone Hill is about 5 miles north-west of Hythe, in Kent. Whether you’re in the middle of Stone Hill or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Our Kent coverage runs to 922 places, Stone Hill among them. For nearby work, see our Chelmsford page (48 miles or so).

Jobs for fire rated sealant in TN25 works the same way as everywhere else we cover. That includes homes and businesses on Stone Hill, Southenay Lane and Cooper's Lane. If you are just outside Stone Hill, we cover Lilyvale (1 mile north-west), Brabourne Lees (1 mile north-west), Smeeth (1 mile north-west), Ridgeway (1 mile north-west) and Bircholt Forstal (2 miles north). We also work in nearby towns such as Ashford (6 miles west), Canterbury (12 miles north), Dover (14 miles east), Folkestone (8 miles east), Faversham (15 miles north) and Hythe (5 miles south-east).

Around Stone Hill

Stone Hill’s nearest station is Westenhanger station, roughly 2.4 miles south-east. Other landmarks nearby include Lympne Castle (3.1 miles south-east) and William Harvey Hospital (3.8 miles north-west). The countryside around Stone Hill includes Hatch Park and Tolsford Hill.

Map of Stone Hill © OpenStreetMap contributors

Fire rated sealant for homes and businesses in Stone Hill

Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. If you are dealing with sealant items on a fire risk assessment action list and gaps left after a refit or conversion, we can help, on service penetrations, flats & HMOs and door frames alike.

For holiday lets, converted business premises or a community building near Stone Hill, the washrooms, kitchens and any fire-rated joints need the same care as a big site.

Each job carries a 12-month guarantee.

Location
Stone Hill (TN25)
Region
Kent
Guarantee
One year on every job
Quotes
A clear quote up front
Telephone
0345 464 0079
Last updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

DIY versus a professional finish

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.

Leave it or put it right?

Squirting in whichever sealant is nearest does not make a fire seal. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. Older cottages and farmhouses around Stone Hill can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.

Why choose Mr Mastic in Stone Hill

  • Rated 4.9 stars on Google
  • Approved under the ARBOMaster scheme
  • Neat joints and a tidy finish
  • Full insurance on every job

Take a look at our cost guide or what customers say.

Questions from Stone Hill

Do you cover smaller places like Stone Hill?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can you help a landlord with a rental near Westenhanger station?

Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.

Do you hold any approvals?

Yes. We hold ARBOMaster approved applicator status, and we are fully insured.

Will you leave a mess?

No. We protect the surfaces around the joints, and we tidy up before we go.

Do you take out the old sealant first?

Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.

What do you need from me for a quote?

A short description and the location, plus pictures if you have them. If we need more, we’ll ask.

Do you guarantee your work?

Yes: twelve months. If anything isn’t right with the work within the year, let us know and we’ll sort it.

How long does the job take?

As a guide, most jobs take from a few hours to a few days, depending on the number of gaps and the access. Bigger jobs take longer, and we will tell you how long to expect.

How we quote for fire rated sealant

You’ll get a clear quote before any work starts. It takes into account:

  • Any working-time requirements on site
  • The type of sealant required
  • The number and length of the joints
  • How easy the joints are to reach

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please call 0345 464 0079 or email us and we will talk you through it.

Asking for a quote

When you contact us, these details help:

  • How many joints, rooms or windows are involved
  • If it’s domestic, commercial or a hotel
  • Pictures of the joints, sent by email
  • Any access issues, like height or stairs

To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before we start.

Honest limits

It helps to know what we can’t do too:

  • Construction that does not provide fire resistance on its own
  • Assessing a building’s fire safety
  • Openings too large for sealant, which need batts, boards or another system

Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before you book.

Where we work in Stone Hill

  • Door frames
  • Service penetrations
  • Flats & HMOs
  • Linear gaps
  • Pipe & cable gaps
  • Plasterboard & masonry

What we are called out for in Stone Hill

A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.

Signs it’s time to call us include:

  • Linear gaps at the head of walls
  • Gaps around pipes and cables through fire-resisting walls
  • Open gaps behind door architraves
  • Gaps filled with a product that is not fire-rated

Rented homes near Westenhanger station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.

What to look for in a quote

  • Whether the sealant suits the joint
  • What insurance they hold
  • Is the old sealant removed completely?
  • Is VAT in the price?

Our hiring checklist

The process

The work is kept neat and contained to the area we are working on, so you can carry on as normal. The job normally takes a few hours for a handful of gaps, and longer for a whole building, and we tell you how long to leave it before we go. Somewhere like Stone Hill needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. We plan the order of work and access, floor by floor or flat by flat.
  2. Old, damaged or unsuitable sealant is removed.
  3. Gaps are cleaned of dust and loose material.
  4. We apply and tool the sealant to the product’s tested detail.
  5. We record what was done and flag anything that needs a different system.

Getting ready for the visit

  • Clear the area around the work
  • Let us know if you’ve seen damp or leaks
  • Let us know about earlier repairs to the joints

Get a quote

For fire rated sealant in Stone Hill, ring 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.

Ask for a quote

Advice

Keeping the joints in good condition

A little care helps the new joints last. Our advice:

  • Make resealing part of every contractor’s brief
  • Keep the record of products and locations with your fire safety documents
  • Plan fire stopping into any work that goes through walls or floors
  • Keep general-purpose foam and caulk away from fire-stopping gaps

Include fire stopping in your regular building checks. Watch for cracking, gaps or seals that have been disturbed and have them put right.

Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the job gets bigger.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job