Essex · England
Stock Fire Rated Sealant
Fire rated sealant for Stock and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Gaps filled with a product that is not fire-rated
- Gaps around pipes and cables through fire-resisting walls
- Damaged fire sealant left by other trades
DIY versus a professional finish
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Fire rated sealant for homes and businesses in Stock
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. Anything unsuitable comes out first and the gap is resealed with a product tested for that use. If you have gaps filled with a product that isn’t fire-rated and holes left by a change of layout, we can put it right.
If you have holiday lets, a converted barn used for business or a community building near Stock, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, you get the same one-year guarantee in Stock and across Essex.
- Place
- Stock (CM4)
- Region
- Essex
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Photograph sealed gaps before they’re covered up
- Include hidden areas like risers in routine checks
- Ask which product was used before you paint
- Tell trades working in the building that fire seals must be put back
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- Assessing a building’s fire safety
- A wall that isn’t a fire-resisting element to begin with
- Fire doors that need new seals, closers or hardware
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before you book.
What we seal
- Pipe & cable gaps
- Linear gaps
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
- Door frames
How we quote for fire rated sealant
We quote each job individually. This is what makes a difference:
- When we can work, for business premises
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
- If someone has resealed it before
- The address or postcode of the job
Getting a quote is simple: tell us what needs doing and where. A few photos by email make the job easier to understand, and we’ll take it from there.
What fire rated sealant looks like in Stock
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Church of All Saints, older buildings that have had new heating or wiring often have service gaps worth checking. Letting a property close to Billericay station? Then any gap left by new services in shared walls should be closed with a fire-rated product. For site and facilities teams at buildings such as Stock Church of England Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Stock is about 3 miles north-east of Billericay, in Essex. From the centre of Stock to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Our Essex coverage runs to 644 places, and Stock is one of them.
We work across the CM4 postcode area for fire rated sealant and the streets around it. Streets in the area include The Square, High Street and Webster Place, all of which we cover. If you are just outside Stock, we cover Margaretting Tye (2 miles north), Ramsden Heath (2 miles south-east), Margaretting (2 miles north-west), Downham (3 miles south-east) and Billericay (3 miles south-west). We also work in nearby towns such as Chelmsford (5 miles north), Basildon (6 miles south), Brentwood (7 miles south-west), Maldon (11 miles north-east), Canvey Island (11 miles south-east) and Rayleigh (8 miles south-east).
Local landmarks in Stock
We work in homes and buildings around The Hoop Public House and Mayflower High School, among other places. Stock’s nearest station is Billericay station, about 2.7 miles south-west. Well-known places in the area include Mayflower Community Hospital (3.4 miles south-west). Open spaces near Stock include Norsey Wood.
Work for landlords, hotels and businesses
We work for landlords and letting agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Nearby places to Stock
What else we do in Stock
Common questions in Stock
Do you work for landlords with property near Billericay station?
Yes, we work for letting agents and landlords. Just call 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
Is Stock in your area for fire rated sealant?
Yes, Stock is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing.
What fire rating will the seal have?
Ratings and certificates aren’t something we issue. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
How long does fire rated sealant take?
As a guide, most jobs take from a few hours to a few days, depending on the number of gaps and the access. Bigger jobs take longer, and we will say how long yours will take.
How do I get a quote for fire rated sealant in Stock?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before work begins.
Do you offer different sealant colours?
Yes. Sealants come in white, clear, grey and other colours, and we will agree it with you first.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can new sealant go over the old?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
What we do, step by step
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Stock, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
Getting ready for the visit
- Let us know about parking restrictions
- Tell us about any water getting in
- On commercial sites, let us know about site rules
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Read more
Why deal with it now?
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own that does not depend on other work. Where a wall is exposed, as many are in small places like Stock, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, call 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Why us?
- 20+ years of sealant experience
- An ARBOMaster approved applicator
- Fully insured
- Quality sealants from Arbo and Everbuild
Take a look at what affects the cost and our reviews.