Oxfordshire · England
Shilton Fire Rated Sealant
Fire-stopping gaps in Shilton need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Damaged fire sealant left by other trades
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps where pipes and cables go through a wall
How we handle fire rated sealant in Shilton
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. We work on flats & HMOs, door frames and service penetrations, and people most often call us about joints picked up in a fire-stopping survey and gaps left after a refit or conversion.
For a small place like Shilton, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
A one-year guarantee comes as standard, so you’re covered after we’ve gone.
- Place
- Shilton (OX18)
- Wider area
- Oxfordshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Keeping the joints in good condition
After the cure time, these simple habits help:
- File the fire-stopping record where your assessor can find it
- Take pictures of fire stopping before ceilings or boxing go back
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Report cracked or damaged seals as soon as you notice them
Leave the sealant to cure fully before painting near it. Some fire-rated sealants can be painted and some cannot and we’ll tell you which one you have.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the job gets bigger.
Common questions in Shilton
What guarantee comes with fire rated sealant in Shilton?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Do you cover Shilton for fire rated sealant?
Yes, Shilton is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little.
How much does fire rated sealant cost in Shilton?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before work begins.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint.
Is standard sealant good enough for a fire gap?
No. It might close the gap, but it isn’t a fire-rated seal. Use a product tested for that gap and service, or ask us to do it.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you do not need to watch us work.
Where is Mr Mastic based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
The process
You do not need to clear the whole room or building, only the area right around the joints. We protect the rest, and the job takes anything from a few hours to several days, depending on how many gaps there are in most cases. For a village or hamlet like Shilton, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Mention if the joints have been sealed before
- Tell us if parking is tricky
Getting a quote
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.
Related advice
Signs you need fire rated sealant in Shilton
Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk in a place that needed a tested fire seal. It may look fine, but it isn’t a fire-rated seal.
If you can see any of these, it’s time to have the joints looked at:
- Damaged fire sealant left by other trades
- Gaps filled with a product that isn’t fire-rated
- Unsealed gaps where pipes and cables go through a wall
- Cracked or shrunken fire-rated sealant
Community buildings like Church of the Holy Rood are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Before you book anyone
- Whether they seal over old material or remove it
- How much experience the applicator has
- What product goes in the joint
- How the surfaces are prepared before sealing
For landlords and businesses
If you manage several properties in or around Shilton, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
We work for landlords and agents as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Workplaces and buildings in Shilton
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a building such as Carterton Community College, fire-stopping around service openings should be restored whenever new services go in.
Shilton is about 1 mile north-west of Carterton, in Oxfordshire. Shilton gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Shilton is one of 443 towns and villages in Oxfordshire where we work. Our Oxford page covers work nearby, about 16 miles away.
Postcode districts we cover here for fire rated sealant: OX18. We cover properties on The Hill, Church Lane and Ladburn Lane and the roads around them. Nearby, we also carry out fire rated sealant in Bradwell (1 mile west), Kencot (2 miles south) and Alvescot (3 miles south). Within a short drive, we also cover Witney (5 miles east), Wantage (15 miles south-east), Grove (14 miles south-east), Faringdon (9 miles south), Kidlington (14 miles east) and Chipping Norton (12 miles north).
Around Shilton
We work in homes and buildings around Carterton Primary School and The Rose And Crown Inn and the streets around them. Well-known places in the area include Bronze Age Bowl Barrow (2.9 miles south-east) and Swinford Museum (3.2 miles south-west).
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
What we cannot put right
In fairness, there are a few things sealant will not fix:
- Fire risk assessments, which need a qualified assessor
- Openings too large for sealant, which need batts, boards or another system
- Doors that are not fire doors in the first place
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Pipe & cable gaps
- Linear gaps
- Door frames
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
Also in Shilton
Surface by surface
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. We use a product tested in that kind of wall.