Isle of Wight · England
Fire-rated sealant in Sandford, Isle of Wight
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Sandford and across the Isle of Wight. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Gaps flagged on a fire risk assessment
- Unsealed gaps where pipes and cables go through a wall
- New service routes left unsealed after building work
Honest limits
We’d rather tell you now than do work that will not last, so these are the limits:
- Fire risk assessments, which need a qualified assessor
- Openings too large for sealant, which need batts, boards or another system
- Fire doors that need new seals, closers or hardware
If you’re not sure, just ring 0345 464 0079 or email us and we will give you a straight answer before you book.
Surfaces we seal
- Plasterboard & masonry
- Pipe & cable gaps
- Door frames
- Service penetrations
- Flats & HMOs
- Linear gaps
How we handle fire rated sealant in Sandford
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on service penetrations, plasterboard & masonry and door frames, and common reasons people get in touch are old fire sealant that has split or come away and seals cut through by electricians, plumbers or data installers.
If you have holiday lets, a converted barn used for business or a community building near Sandford, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
A one-year guarantee comes as standard, so you’re not left on your own once the job is done.
- Where
- Sandford (PO38)
- Wider area
- Isle of Wight
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Why act early in Sandford
Squirting in whichever sealant is nearest doesn’t make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. Where a wall is exposed, as many are in small places like Sandford, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
What you get with us
- Trusted Arbo and Everbuild sealants
- Fully insured
- A 12-month guarantee on all work
- Rated 4.9 stars on Google
Take a look at our cost guide or our reviews.
Different surfaces, different methods
Flats and HMOs
Conversions generally leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product.
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Quotes for fire rated sealant in Sandford
The quote reflects the job in front of us. We take into account:
- Whether there’s mould to deal with
- The old material and how stubborn it is
- When we can work, for business premises
- How many areas need sealing
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What we need to know
There’s no need for technical detail. Just tell us:
- Pictures of the joints, sent by email
- Where the job is, and your postcode
- Roughly how big the job is
- Any access issues, like height or stairs
There’s no standard price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or drop us an email.
Sandford: your questions answered
Do you work for landlords with property near Shanklin station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear price.
Will you come out to Sandford?
Yes, Sandford is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is the work guaranteed?
Yes. Every job comes with our 12-month guarantee.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Can ordinary silicone be used in a fire-stopping gap?
No. It looks sealed but won’t perform as fire stopping. A tested fire-rated product is needed.
Can you give us a record of the work?
Yes. We note each location and the product that went in so it’s there for the next inspection.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little.
How long does fire rated sealant take?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including preparation and clearing up. Your quote will say how long we expect yours to take.
What we’re called out for in Sandford
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
Keep an eye out for any of the following:
- Cracked or shrunken fire-rated sealant
- Linear gaps at the head of walls
- Open gaps behind door architraves
- Ordinary sealant used where a fire-rated product was needed
Schools such as Godshill Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
What to look for in a quote
- Are they insured?
- What preparation is included
- What happens if the job turns out different
- When the joint can take water or movement
Workplaces and buildings in Sandford
For seaside hotels, guest houses and holiday lets around Sandford, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Letting a property close to Shanklin station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like All Saints' Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Sandford is about 5 miles south-east of Newport, in the Isle of Wight. For fire rated sealant in and around Sandford, please phone 0345 464 0079 or drop us an email for a quick quote. We cover the Isle of Wight from our Crawley base. Sandford is one of 125 towns and villages in the Isle of Wight where we work for fire rated sealant. We also work in Portsmouth, about 14 miles from Sandford.
Postcode districts we cover here for fire rated sealant: PO38. Local streets include Shanklin Road and Redhill Lane, all of which we cover. Neighbouring places we cover for fire rated sealant include Whiteley Bank (1 mile east), Godshill (1 mile west), Princelett (1 mile north-east), Wroxall (1 mile south-east) and Hale Common (1 mile north). Within a short drive, we also cover Newport (5 miles north-west), Ryde (7 miles north-east), Cowes (9 miles north), Sandown (4 miles north-east), Shanklin (3 miles east) and Ventnor (3 miles south-east). Island and remote addresses take a little more planning, so please mention your location when you call 0345 464 0079 or email us.
Around Sandford
Around Sandford, our work takes us to homes and buildings near The Griffin Public House and the streets around them. The nearest railway station is Shanklin station, about 2.5 miles east. A little further out are Sandown Castle (4.3 miles east) and Museum of Country And Agriculture (2.4 miles north). Not far away are Stenbury Down and Alverstone Mead.
What we do, step by step
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the work takes from a few hours to a few days, depending on the number of gaps and the access in most cases. Somewhere like Sandford needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Let us know about parking restrictions
- Let us know about stairs, lifts or work at height
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
For fire rated sealant in Sandford, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.
Read more
Towns and villages near Sandford
More services for Sandford
Looking after it afterwards
So the new joints stay in good condition:
- Look in service cupboards and ceiling voids from time to time
- Do not paint over fire sealant until it has cured
- Include fire stopping when you schedule refits
- Do not fill fire-stopping gaps with ordinary foam or silicone
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is normally a straightforward job.