Hampshire · England
Fire-rated sealant in Salters Heath, Hampshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Salters Heath and across Hampshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Gaps around pipes and cables through fire-resisting walls
- Door frames with gaps between frame and wall
- New service routes left unsealed after building work
Fire rated sealant in Salters Heath, done properly
We often work from an action list drawn up by a fire risk assessor. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. We work on door frames, flats & HMOs and plasterboard & masonry, and common reasons people get in touch are holes left by a change of layout and sealant items on a fire risk assessment action list.
In a village or hamlet like Salters Heath, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
Whatever the size of the job, it’s backed by our one-year guarantee in Salters Heath and across Hampshire.
- Location
- Salters Heath (RG26)
- Region
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Should I try it myself first?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Salters Heath: your questions answered
Do you cover smaller places like Salters Heath?
Yes, Salters Heath is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you do fire rated sealant in Salters Heath?
Yes. We work across London and the South East, and Salters Heath is part of that. You can ring 0345 464 0079 or email us and let us know what needs doing, and we will give you a clear quote.
What’s the difference between intumescent and fire-rated sealant?
An intumescent sealant expands when it gets hot to help seal the gap. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
What do you need from me for a quote?
A short description and the location. If we need more, we will ask.
What does fire rated sealant cost?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Do you provide details of the products used?
Yes. You get a list of where we worked and what we used to keep with your fire safety documents.
Can you seal over the old sealant?
No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
What the job involves on each surface
Service penetrations
Different services need different details: metal pipes, cables and plastic pipes aren’t treated the same. We follow the manufacturer’s tested detail for each.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We seal them along their full length leaving no stretch unsealed.
Fire rated sealant around Salters Heath
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Managing a site like The Priory Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices. Rented homes near Bramley (Hants) station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For buildings such as Pamber Priory, service openings in its walls need the right fire-rated sealant, as in any building.
Salters Heath is about 3 miles south of Tadley, in Hampshire. Whether you’re in the middle of Salters Heath or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Our Hampshire coverage runs to 683 places, Salters Heath among them. Reading is on our list too, about 11 miles from Salters Heath.
Work in RG26 works the same way as everywhere else we cover. We cover properties on Aldermaston Road and Salters Heath Road. Neighbouring places we cover for fire rated sealant include Pamber End (1 mile north-west), Monk Sherborne (1 mile south-west), Pamber Green (1 mile north), Little London (1 mile north-east) and Charter Alley (1 mile west). We also work in nearby towns such as Basingstoke (4 miles south), Farnborough (15 miles east), Fleet (12 miles east), Alton (13 miles south-east), Yateley (12 miles east) and Tadley (3 miles north).
Local landmarks in Salters Heath
Typical jobs here are in homes near The Queens College Arms and Everest Community Academy. Salters Heath’s nearest station is Bramley (Hants) station, about 2.7 miles east. A little further out are Calleva Museum (2.8 miles north) and Basing House (4.4 miles south-east). The countryside around Salters Heath includes Daneshill Park Woods.
Nearby places to Salters Heath
What else we do in Salters Heath
How we quote for fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How easy the joints are to reach
- The amount of work
- The number of rooms or windows
- When we can work, for business premises
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
Before you ask for a quote, have a think about:
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
- Where the property is
- Photos by email, if that is easy
For a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Landlord and commercial work in Salters Heath
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Looking after it afterwards
So the new joints stay in good condition:
- Photograph sealed gaps before they’re covered up
- Ask which product was used before you paint
- Look in service cupboards and ceiling voids from time to time
- Tell trades working in the building that fire seals must be put back
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
When it isn’t the sealant
In fairness, there are a few things sealant won’t fix:
- Construction that doesn’t provide fire resistance on its own
- Doors that aren’t fire doors in the first place
- Large holes that need a different fire-stopping system
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly.
Joints and surfaces we work on
- Plasterboard & masonry
- Door frames
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
What happens on the day
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Salters Heath, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Before we arrive
- Mention any parking rules near the property
- Where the joints are inside, avoid wetting them before we arrive
- Let us know if you’ve seen damp or leaks
Ask for a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.