Hampshire · England
Fire-rated sealant in Charter Alley, Hampshire
Fire rated sealant for Charter Alley, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Standard silicone or caulk in a fire-stopping gap
- Sealant items on a fire risk assessment action list
- Open holes round services passing through fire walls
Signs you need fire rated sealant in Charter Alley
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
People usually contact us after spotting one of these:
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps around fire door frames
- New service routes left unsealed after building work
- Old fire sealant that has split or come away
If you let a flat or house near Bramley (Hants) station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What to look for in a quote
- What preparation is included
- What happens if the job turns out different
- What the cure time is
- What insurance they hold
Fire rated sealant in Charter Alley
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. We work on flats & HMOs, plasterboard & masonry and door frames, and common reasons people get in touch are door frames with gaps between frame and wall and ordinary sealant used where a fire-rated product was needed.
For holiday lets, converted business premises or a community building near Charter Alley, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Your job is guaranteed for a year, as with all our work.
- Place
- Charter Alley (RG26)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
How the job changes by surface
Service penetrations
Service penetrations are where new gaps often appear. We clean out what’s there and reseal to the right depth over any backing the detail calls for.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing so the sealant bonds.
Keeping the joints in good condition
So the new joints stay in good condition:
- Check whether a sealant can be painted before decorating over it
- Make resealing part of every contractor’s brief
- Never patch a fire seal with standard sealant
- Flag any open gap you spot round a pipe or cable
Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
The process
Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself usually takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. For a village or hamlet like Charter Alley, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Keep children and pets away from the work area
- Mention any parking rules near the property
Get a quote
Every job is quoted individually. Simply call 0345 464 0079 or email us and describe the job, and pictures are welcome.
Related advice
What we can’t put right
Sealant is not the answer to every problem, and we will tell you before we start. It will not solve:
- Assessing a building’s fire safety
- Certifying a building or signing off its fire safety
- Walls or floors that weren’t built to resist fire
If you’re not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.
Surfaces we seal
- Linear gaps
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Door frames
- Flats & HMOs
What affects the cost of fire rated sealant
Jobs vary more than people expect. The main factors:
- Whether old sealant or filler has to be cut out
- Any mould that needs treating
- The type of sealant required
- How many areas need sealing
The cost depends on the amount of work, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Asking for a quote
There’s no need for technical detail. It helps if you can tell us:
- Whether it has been sealed before
- Access, such as stairs, a lift or height
- Where the property is
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, phone 0345 464 0079 or drop us an email.
Commercial buildings in Charter Alley
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Christ Church, older buildings that have had new heating or wiring often have service gaps worth checking. For site and facilities teams at buildings such as The Priory Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Charter Alley is about 3 miles south of Tadley, in Hampshire. Whether you are in the middle of Charter Alley or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Charter Alley is one of 683 towns and villages in Hampshire where we work for fire rated sealant. Reading is on our list too, around 12 miles away.
All of RG26 is within our area for fire rated sealant, from the main roads to the quietest streets. Local streets include Old Chapel Lane, Sand Martin Close and White Hart Lane, and we cover them all. Other places close to Charter Alley include Ramsdell (1 mile west), West Heath (1 mile north-west), Pamber End (1 mile north-east), Monk Sherborne (1 mile south-east) and Salters Heath (1 mile east). Within a short drive, we also cover Basingstoke (4 miles south-east), Fleet (14 miles east), Alton (14 miles south-east), Yateley (14 miles east), Tadley (3 miles north) and Hook (8 miles east).
Local landmarks in Charter Alley
The nearest railway station is Bramley (Hants) station, about 3.8 miles east of the centre. Other landmarks nearby include Park Prewett Hospital (2.7 miles south-east) and Calleva Museum (3.4 miles north-east). For a walk, there’s Daneshill Park Woods.
Places near Charter Alley
Other services in Charter Alley
Questions from Charter Alley
Is Charter Alley in your area for fire rated sealant?
Yes, Charter Alley is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
I let a flat near Bramley (Hants) station. Can you help?
Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before any work starts.
What does intumescent mean?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent types expand when heated, and they’re one option among several. The specification and the tested detail decide which is used.
What should I tell you?
Just the basics: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or drop us an email.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you have insurance?
Yes. We’re fully insured, and we can confirm the details when we quote.