East Sussex · England
Fire-rated sealant in Ringmer, East Sussex
Fire rated sealant in Ringmer from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Gaps flagged on a fire risk assessment
- New service routes left unsealed after building work
- Gaps around pipes and cables through fire-resisting walls
Fire rated sealant for homes and businesses in Ringmer
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. We’re often asked to deal with standard silicone or caulk in a fire-stopping gap and gaps flagged on a fire risk assessment, across linear gaps, flats & HMOs and plasterboard & masonry.
For a pub, café, guest house or shop in or near Ringmer, its washrooms and kitchen need the same sealant care as any big building.
Whatever the size of the job, you get the same 12-month guarantee in Ringmer and across East Sussex.
- Where
- Ringmer (BN8)
- Wider area
- East Sussex
- Cover
- 12 months on all our work
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
When to call us in Ringmer
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it is not a fire-rated seal.
The problems people normally mention when they call include:
- Standard silicone or caulk in a fire-stopping gap
- Seals cut through by electricians, plumbers or data installers
- New service routes left unsealed after building work
- Fire seals that have cracked with movement
Managing a site like Ringmer Primary and Nursery School? Then service openings in fire-resisting walls need checking after any refurbishment.
Questions to ask before you book
- Whether they seal over old material or remove it
- What happens if they find a problem under the old sealant
- Whether the sealant suits the joint
- Who turns up on the day
When it isn’t the sealant
New sealant can’t fix everything, and we will tell you before any work starts. It won’t solve:
- Big openings where sealant alone isn’t the tested solution
- Construction that does not provide fire resistance on its own
- Fire doors that need new seals, closers or hardware
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Pipe & cable gaps
- Plasterboard & masonry
- Door frames
- Service penetrations
- Linear gaps
- Flats & HMOs
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
Your questions about fire rated sealant in Ringmer
Will you come out to Ringmer?
Yes, Ringmer is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Glynde station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Will we have a record of what was sealed?
Yes. You get a list of where we worked and what we used.
How do I get a quote for fire rated sealant in Ringmer?
Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or send us an email and tell us what needs doing and where.
Are you insured?
Yes. We’re fully insured, and we have been doing sealant work for more than 20 years.
Is the work guaranteed?
Yes, always. Each job is guaranteed for twelve months.
How long does fire rated sealant take?
That depends on the amount of work, but as a guide it takes anything from a few hours to several days, depending on how many gaps there are. We will tell you when we quote.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Surface by surface
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Places near Ringmer
More services for Ringmer
How we quote for fire rated sealant
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- How many areas need sealing
- Mould in or behind the old joints
- Access and height
- The old material and how stubborn it is
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
Helping us quote
Before you ask for a quote, have a think about:
- The address or postcode of the job
- Any access issues, like height or stairs
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. When it suits you, call 0345 464 0079 or send us an email.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
The process
At the end, we look at the finished work together. The work normally takes a few hours for a handful of gaps, and longer for a whole building, depending on the amount of work. Parking around Ringmer is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Preparing for the visit
- Tell us about any water getting in
- Clear the area around the work
- Tell us if parking is tricky
Get a quote
There’s no standard price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Read more
Commercial buildings in Ringmer
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as The Parish Church of St Mary the Virgin, older buildings that have had new heating or wiring often have service gaps worth checking. If you let a flat or house near Glynde station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Ringmer is about 3 miles north-east of Lewes, in East Sussex. Across the BN8 area, our applicators can take on fire rated sealant. Our area takes in 289 places across East Sussex. Brighton is on our list too, around 9 miles away.
Work in BN8 works the same way as everywhere else we cover. Whether your property is on Ashcroft Close, Springett Avenue and Danforth Way or anywhere close by, we can help. Other places close to Ringmer include Ashton Green (1 mile east), Glyndebourne (1 mile south), Glynde (2 miles south), Cliffe (2 miles south-west) and South Malling (2 miles south-west). We also work in nearby towns such as Eastbourne (12 miles south-east), Seaford (8 miles south), Lewes (3 miles south-west), Hailsham (9 miles east), Crowborough (12 miles north-east) and Uckfield (6 miles north).
Landmarks near Ringmer
Typical jobs here are in homes near The Anchor pub and Ringmer Community College and Sixth Form. The closest station to Ringmer is Glynde station, about 2.4 miles south of the centre. Nearby you’ll also find Museum of Agricultural Bygones (1.5 miles east) and Lewes Victoria Hospital (3 miles south-west). For a walk, there’s Cliffe Hill and Malling Down.