Bracknell Forest · England
Fire-rated sealant in Priestwood, Bracknell Forest
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Priestwood. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Sealant items on a fire risk assessment action list
- Ordinary sealant used where a fire-rated product was needed
- Open gaps behind door architraves
Why act early in Priestwood
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, and we work to the product details every time. Around Priestwood, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before work begins.
Why book with us
- Domestic, commercial and hotel work
- More than 20 years in sealant work
- Old sealant always removed completely
- We leave the area clean and tidy
How we handle fire rated sealant in Priestwood
Deciding which gaps need fire stopping is not our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We work on service penetrations, door frames and linear gaps, and people most often call us about holes left by a change of layout and sealant items on a fire risk assessment action list.
Around a place like Priestwood, halls, schools and small businesses all have washrooms and kitchens used by many people. Their sealant and fire-rated joints are as important as those in any bigger building.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Place
- Priestwood (RG42, RG12, RG45)
- Region
- Bracknell Forest
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Questions from Priestwood
Do you work for hotels and guest houses in Priestwood?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
I let a flat near Bracknell station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Do you provide details of the products used?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated to help seal the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Is the work guaranteed?
Yes. Every job comes with a one-year guarantee.
Is it OK to seal over old sealant?
No. New silicone will not bond to old silicone, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
Towns and villages near Priestwood
More services for Priestwood
When to call us in Priestwood
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It looks sealed, but it isn’t fire-rated.
These are the problems we’re asked about most:
- Fire stopping disturbed by later work
- Door frames with gaps between frame and wall
- Holes left by a change of layout
- Sealant items on a fire risk assessment action list
For buildings such as St Andrew, older buildings that have had new heating or wiring often have service gaps worth checking.
What your quote should include
- Is VAT in the price?
- What preparation is included
- Who turns up on the day
- The length of the guarantee
What happens on the day
Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. In a smaller place like Priestwood, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your files.
How to prepare
- Keep pets and children clear of the area while we work
- Mention any tricky access
- Mention any leaks or damp you’ve noticed
Get a quote
If you are in Priestwood and need fire rated sealant, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Advice
Fire rated sealant in Priestwood: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details. There are hotels and other places to stay in and around Priestwood. Hotel work can be planned room by room, with out-of-hours working where needed.
Managing a site like Meadow Vale Primary School? Then fire-stopping around service openings should be restored whenever new services go in. If you let a flat or house near Bracknell station, any gap left by new services in shared walls should be closed with a fire-rated product.
Priestwood is about 1 mile north-west of Bracknell, in Bracknell Forest. If you need fire rated sealant in Priestwood, please phone 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Bracknell Forest. Priestwood is one of 41 towns and villages in Bracknell Forest we cover. You can also see our page for Reading, roughly 9 miles from Priestwood.
We work across the RG42, RG12 and RG45 postcode area for fire rated sealant and the streets around it. Streets in the area include Park Lane, Kiln Lane and Jock's Lane, all of which we cover. Neighbouring places we cover for fire rated sealant include Temple Park (1 mile north-west), Farley Wood (1 mile west), Quelm Park (1 mile north-east), Popeswood (1 mile west) and Bracknell (1 mile south-east). We also work in nearby towns such as Sandhurst (5 miles south), College Town (6 miles south), Little Sandhurst (5 miles south) and Owlsmoor (5 miles south). Priestwood is among the bigger towns we cover in Bracknell Forest.
Around Priestwood
Around Priestwood, our work takes us to homes and buildings near Market Inn, Garth Hill College and The Brakenhale School. For rail, the closest station is Bracknell station, about 0.8 miles south-east of the centre. Other landmarks nearby include The Lexicon (0.7 miles south-east) and Pinewood Hospital (2.9 miles south-west). For a walk, there’s Holt Copse & Joel Park and Heath Lake.
Honest limits
To be straight with you, some problems need a different trade:
- Problems with the door itself rather than the gap around the frame
- Walls or floors that weren’t built to resist fire
- Large holes that need a different fire-stopping system
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Plasterboard & masonry
- Flats & HMOs
- Service penetrations
- Door frames
- Pipe & cable gaps
- Linear gaps
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Plan fire stopping into any work that goes through walls or floors
- Flag any open gap you spot round a pipe or cable
- Tell trades working in the building that fire seals must be put back
- Look in service cupboards and ceiling voids from time to time
Leave the sealant to cure fully before painting near it. Some fire-rated sealants can be painted and some cannot.
An open gap is not only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
For landlords and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll quote.
Housing providers, facilities teams and property managers book us too in Priestwood and across Bracknell Forest. Several sites can go on one quote, and we are fully insured.