West Sussex · England
Fire Rated Sealant in Poling
Fire rated sealant across Poling and nearby, with old sealant always removed completely and a one-year guarantee.
- Seals cut through by electricians, plumbers or data installers
- Standard silicone or caulk in a fire-stopping gap
- Cracked or shrunken fire-rated sealant
About our fire rated sealant in Poling
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment on buildings across Poling. If you share the list, we can quote for the gaps that need fire-rated sealant. If you have gaps where walls meet ceilings or slabs and gaps left after a refit or conversion, we can put it right.
For a small place like Poling, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Poling (BN18)
- Wider area
- West Sussex
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Service penetrations
Different services need different details: metal pipes, cables and plastic pipes are not treated the same. We follow the manufacturer’s tested detail for each, and tell you if sealant alone isn’t the right fix.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing.
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- Walls or floors that weren’t built to resist fire
- Problems with the door itself rather than the gap around the frame
- Fire risk assessments, which need a qualified assessor
If you’re not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Surfaces we seal
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Door frames
- Plasterboard & masonry
- Service penetrations
When to call us in Poling
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. Rushed fire stopping is common particularly when it was the last job before handover.
Most people get in touch when they notice one of these:
- Open holes round services passing through fire walls
- Old fire sealant that has split or come away
- Gaps flagged on a fire risk assessment
- Damaged fire sealant left by other trades
Letting a property close to Arundel station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- Which colour the sealant will be
- Who does the work, and how experienced they are
- What preparation is included
Your questions about fire rated sealant in Poling
Can you help a landlord with a rental near Arundel station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear price.
Will you come out to Poling?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Where are you based?
Mr Mastic is based in Crawley. Our applicators cover Poling, along with the rest of our area.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we’re done.
Do you have insurance?
Yes. We’re fully insured.
Do you guarantee your work?
Yes, for a year. If anything isn’t right with the work within the year, let us know and we will sort it.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.
Fire rated sealant around Poling
If you run a hotel, guest house or holiday let in a coastal place like Poling, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as The Parish Church of St Nicholas, service openings in its walls need the right fire-rated sealant, as in any building. For site and facilities teams at buildings such as The Littlehampton Academy, fire-stopping around service openings should be restored whenever new services go in.
Poling is about 2 miles north of Littlehampton, in West Sussex. Homes, rented property, offices and hotels in Poling can book us for fire rated sealant. Every job comes with our 12-month guarantee. We cover 371 towns and villages across West Sussex, large and small. You can also see our page for Brighton, roughly 17 miles from Poling.
Jobs for fire rated sealant in BN18 is quoted and booked the same way as anywhere else. We also cover the places around Poling: Crossbush (1 mile north-west), Warningcamp (1 mile north-west), Toddington (1 mile south-west), Lyminster (2 miles west) and Rustington (2 miles south). We also work in nearby towns such as Worthing (5 miles east), Bognor Regis (8 miles south-west), Chichester (12 miles west), Selsey (14 miles south-west), Shoreham-by-Sea (11 miles east) and Lancing (8 miles east).
Around Poling
Poling’s nearest station is Arundel station, about 1.6 miles north-west of the centre. Other landmarks nearby include Rustington Museum (2 miles south) and Zachary Merton Hospital (2.1 miles south). Not far away are Highdown Hill and WWT Arundel.
Also in Poling
Landlords, agents and businesses in Poling
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
How it works
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a handful of gaps, and longer for a whole building, including the tidy-up. For a village or hamlet like Poling, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about parking restrictions
- Tell us about any previous sealing or DIY attempts
Getting a quote
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, phone 0345 464 0079 or send us an email.
Advice
What affects the quote in Poling
We quote each job individually. This is what makes a difference:
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
- Whether the work is at height
- Mould in or behind the old joints
What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
What we need to know
Photos by email are helpful but not essential. Please mention:
- Access, such as stairs, a lift or height
- Roughly how big the job is
- The type of property
- Where the property is
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Why deal with it now?
Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, so we follow the maker’s details on every gap. Where a wall is exposed, as many are in small places like Poling, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Doing several joints on one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.
Why us?
- 20+ years of sealant experience
- Approved under the ARBOMaster scheme
- A 12-month guarantee on all work
- Tidy, careful work