Hampshire · England

Fire Rated Sealant in Ovington

Our applicators work in Ovington on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.

  • Gaps left after a refit or conversion
  • Gaps filled with a product that is not fire-rated
  • Sealant items on a fire risk assessment action list

Fire rated sealant near Ovington

Fire rated sealant in Ovington, done properly

A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That’s the part we focus on, gap by gap. We work on service penetrations, plasterboard & masonry and linear gaps, and the jobs we see most are holes left by a change of layout and gaps where walls meet ceilings or slabs.

For a small place like Ovington, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.

Every job is covered by a 12-month guarantee, wherever you are in Hampshire.

Eleven members of the Mr Mastic team standing in front of branded white vans
Place
Ovington (SO24)
Region
Hampshire
Guarantee
One year on every job
Price
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026

Ovington questions

Is fire rated sealant in Ovington guaranteed?

All our work, in Ovington and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.

Can you do fire rated sealant in Ovington?

Yes. We work across London and the South East, and Ovington is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.

Are you insured?

Yes. We’re fully insured.

Which products do you use?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.

Is it worth trying it myself?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.

Is intumescent sealant the same as fire-rated sealant?

An intumescent material expands when it’s heated. Intumescent sealants are a type of fire-rated sealant and which one is used depends on the job.

Do you offer different sealant colours?

Most of the time, yes. We’ll tell you which colours the right product comes in and agree one before any work starts.

Signs you need fire rated sealant in Ovington

Movement in the structure can open gaps too: a seal that cracks or pulls away leaves a path for smoke. Damage from cleaning, knocks and maintenance adds to it.

If you can see any of these, it’s time to have the joints looked at:

  • Old fire sealant that has split or come away
  • New service routes left unsealed after building work
  • Gaps where walls meet ceilings or slabs
  • Unsealed gaps around fire door frames

Managing a site like Perins School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.

Questions to ask before booking

  • How the colour is chosen
  • What insurance they hold
  • Is the old sealant removed completely?
  • The length of the guarantee

Our hiring checklist

Leave it or put it right?

Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job and needn’t wait for anything else. In a small place like Ovington, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.

Why book with us

  • Anti-fungal silicone where joints get wet
  • More than 20 years in sealant work
  • We are fully insured
  • Domestic, commercial and hotel work

Read our cost guide or customer reviews.

Keeping the joints in good condition

Good habits help new joints last longer. A few tips:

  • Store the list of sealed gaps with your building paperwork
  • Don’t paint over fire sealant until it has cured
  • Report cracked or damaged seals as soon as you notice them
  • Look in service cupboards and ceiling voids from time to time

Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some cannot and we’ll tell you which one you have.

Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.

Surface by surface

Masonry and concrete

Masonry is dusty and porous, so preparation matters. The gap is cleaned and backed where required before the sealant goes in.

Door frames

Behind most architraves is a gap between frame and wall. Where it’s open, we seal it to the product’s details for that gap size.

How the visit works

On the day, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Ovington needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. Before starting, we go through the specification or action list with you.
  2. Each gap is measured and its substrate and service noted.
  3. Unsuitable material such as ordinary foam or silicone is cut out.
  4. We fit backing where needed and apply the fire-rated sealant to depth.
  5. We hand over a list of locations and products for your records.

Preparing for the visit

  • Try not to wet indoor joints just before the visit
  • Mention any tricky access
  • Keep children and pets away from the work area

Ask for a quote

Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand.

Ask for a quote

Read more

Landlord and commercial work in Ovington

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Fire rated sealant around Ovington

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.

Community buildings like Church of St Peter are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.

Ovington is about 5 miles east of Hyde, in Hampshire. If you need fire rated sealant in Ovington, please phone 0345 464 0079 or send us an email for a quick quote. We’re based in Crawley and cover Hampshire. Ovington is one of 683 places in Hampshire we cover for fire rated sealant. We also work in Southampton, about 14 miles from Ovington.

Every address in SO24 is covered for fire rated sealant. Neighbouring places we cover for fire rated sealant include Itchen Stoke (1 mile north-west), Itchen Abbas (2 miles north-west), Temple Valley (2 miles south-west), Martyr Worthy (2 miles west) and Easton (3 miles west). We also work in nearby towns such as Basingstoke (13 miles north), Winchester (5 miles west), Eastleigh (10 miles south-west), Andover (15 miles north-west), Horndean (15 miles south-east) and Chandler's Ford (11 miles south-west).

Local landmarks in Ovington

We work in homes and buildings around The Bush Inn. Other landmarks nearby include Wolvesey Castle (5 miles west) and St John's Rooms And Chapel (4.9 miles west). For a walk, there’s Winnall Moors and Twyford Down.

Map of Ovington © OpenStreetMap contributors

Should I try it myself first?

If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.

Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job