Fife · Scotland
Fire Rated Sealant in Newport-on-Tay
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Newport-on-Tay, backed by a one-year guarantee. Call for a quick quote.
- Fire seals that have cracked with movement
- Fire stopping disturbed by later work
- Gaps where walls meet ceilings or slabs
About our fire rated sealant in Newport-on-Tay
Door frame gaps, linear joints and holes around services all have their own details. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. If you are dealing with open joints along the top of partitions and cracked or shrunken fire-rated sealant, we can put it right, whatever the surface.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Location
- Newport-on-Tay (DD6)
- Wider area
- Fife
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Commercial buildings in Newport-on-Tay
If you run a hotel, guest house or holiday let in a coastal place like Newport-on-Tay, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
If you let a flat or house near Dundee station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Newport-on-Tay is about 3 miles south-east of Dundee, in Fife. Across the DD6 area, we cover fire rated sealant for homes and businesses. Our area takes in 133 places across Fife, large and small.
All of DD6 is covered for fire rated sealant, from the main roads to the quietest streets. If you need fire rated sealant at a property on High Street, Woodmuir Terrace and Woodmuir Crescent or anywhere close by, our applicators can take on the job. Being close to the B946 and B995, Newport-on-Tay is easy for our applicators to reach. We also cover the places around Newport-on-Tay: Wormit (1 mile south-west), Drumoig (2 miles south-east), Pickletillum (2 miles south-east), West End (2 miles north-west) and Blackness (3 miles north-west). Larger places within reach include St Andrews (9 miles south-east), Cupar (8 miles south), Tayport (3 miles east), Auchtermuchty (15 miles south-west), Leuchars (4 miles south-east) and Ladybank (13 miles south-west).
Landmarks near Newport-on-Tay
We work in homes and buildings around Slessor Gardens, among other places. The nearest railway station is Dundee station, about 1.8 miles north-west. Nearby you’ll also find Overgate Centre (2 miles north-west) and Discovery Point (1.7 miles north-west). Not far away are Balgay Hill and Trottick Mill Ponds.
How we quote for fire rated sealant
We don’t publish a price list. What we look at:
- The type of sealant required
- Access and height
- The number of rooms or windows
- Any working-time requirements on site
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- The address or postcode of the job
- Pictures of the joints, sent by email
- Whether it has been sealed before
- The rough size of the job
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we will talk you through the work.
Common questions in Newport-on-Tay
Is Newport-on-Tay within the area you cover?
Yes. Newport-on-Tay is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do Scottish building rules affect fire-rated sealant work in Newport-on-Tay?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can you tell me which gaps need fire stopping?
No, we don’t assess buildings. Once you have a specification or action list from your assessor or designer, we’ll quote for the sealant work on it.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in.
Which products do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Also in Newport-on-Tay
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What we do, step by step
There’s no need to move everything out, just the space around the work. We protect the rest, and the job takes anything from a few hours to several days, depending on how many gaps there are for a typical job. Somewhere like Newport-on-Tay may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your records.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Clear items away from the joints we are working on
- On commercial sites, let us know about site rules
Getting a quote
Asking for a quote is easy: tell us what needs doing and where. Photos by email help us understand the job, and we’ll take it from there.
Related advice
Signs you need fire rated sealant in Newport-on-Tay
Sometimes the wrong product was used from the start: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it isn’t a fire-rated seal.
These are the problems we’re asked about most:
- Open holes round services passing through fire walls
- Sealant items on a fire risk assessment action list
- Ordinary sealant used where a fire-rated product was needed
- Old fire sealant that has split or come away
Schools such as Newport Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Before you book anyone
- Is the old sealant removed completely?
- Whether the sealant suits the joint
- Whether you can choose the colour
- How the joint is cleaned and prepared
Honest limits
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Deciding what fire stopping a building needs
- Fire doors that need new seals, closers or hardware
- Construction that doesn’t provide fire resistance on its own
If you are not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer.
Where we work in Newport-on-Tay
- Linear gaps
- Door frames
- Service penetrations
- Plasterboard & masonry
- Pipe & cable gaps
- Flats & HMOs
Different surfaces, different methods
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first so the seal has something sound to bond to.
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail, and we will tell you.
Looking after it afterwards
Looking after new joints is easy:
- File the fire-stopping record where your assessor can find it
- Keep photos of seals that will be hidden
- Never patch a fire seal with standard sealant
- Ask every contractor to reseal any fire stopping they disturb
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the job gets bigger.