Scottish Borders · Scotland
Fire-rated sealant in Morebattle, Scottish Borders
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Morebattle, backed by a 12-month guarantee. Call for a quick quote.
- Sealant items on a fire risk assessment action list
- Cracked or shrunken fire-rated sealant
- Seals cut through by electricians, plumbers or data installers
Morebattle questions
Do Scottish building rules affect fire-rated sealant work in Morebattle?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Do you cover Morebattle for fire rated sealant?
Yes, Morebattle is within the area we cover. Our work covers the whole of Scotland. You can send an email to info@mrmastic.co.uk and tell us what needs doing, and we will send you a clear quote.
Will you leave a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Do you certify the fire stopping?
Ratings and certificates aren’t something we issue. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
Do you take on fire stopping in schools and offices?
Yes. Flats, HMOs, offices, schools and other occupied buildings are all part of our work. The order of work and access are planned with you.
What does intumescent mean?
Intumescent means it swells when heated, helping close the gap. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
Are you insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
What should I tell you?
Let us know what needs doing and where. We’ll ask anything else we need to know.
How we handle fire rated sealant in Morebattle
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, with a record of the products and locations if you need one. Typical jobs include gaps where walls meet ceilings or slabs and standard silicone or caulk in a fire-stopping gap, on door frames, plasterboard & masonry and linear gaps.
Work in a place like Morebattle is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.
- Place
- Morebattle (TD5)
- Region
- Scottish Borders
- Guarantee
- 12 months on all our work
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Commercial buildings in Morebattle
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
If you look after a church, hall or community building such as Parish Church of St Lawrence, older buildings that have had new heating or wiring often have service gaps worth checking.
Morebattle is about 18 miles east of Hawick, in the Scottish Borders. Morebattle gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. 89 places in the Scottish Borders are on our list, large and small. There’s also a page for Edinburgh, about 44 miles away.
All of TD5 is covered for fire rated sealant. Streets in the area include Main Street, Teapot Street and Renwick Gardens. We also cover the places around Morebattle: Town Yetholm (4 miles north-east), Kirk Yetholm (4 miles north-east), Heiton (5 miles north-west), Roxburgh (5 miles north-west) and Nisbet (6 miles west). Larger places within reach include Kelso (6 miles north-west), Jedburgh (8 miles west), Melrose (15 miles west), Earlston (15 miles north-west), St Boswells (11 miles west) and Denholm (13 miles west).
Near you in Morebattle
Nearby you’ll also find Cessford Castle (2 miles west). For a walk, there’s Hoselaw Loch and Din Moss and Yetholm Loch.
What the job involves on each surface
Door frames
Frame gaps are usually hidden behind the architrave. We seal any open gap to the product’s tested details so the architrave can be refitted.
Masonry and concrete
Preparation counts on brick, block and concrete. We brush and vacuum the gap and use backing where the detail needs it.
Do you need fire rated sealant in Morebattle?
Lots of unsealed gaps appear long after the building was completed. New cables, pipes and data runs go through walls and ceilings and the hole they leave does not always get resealed.
People generally contact us when they notice one of these:
- Seals cut through by electricians, plumbers or data installers
- Fire seals that have cracked with movement
- Gaps where walls meet ceilings or slabs
- Door frames with gaps between frame and wall
In and around Morebattle, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
What to look for in a quote
- The length of the guarantee
- How the colour is chosen
- What insurance they hold
- Whether the sealant suits the joint
What happens if it’s left?
A quick fill with any sealant to hand isn’t fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. In an older home around Morebattle, damp from a failed joint can get into timber and plaster.
The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
Why Morebattle customers choose us
- Old sealant always removed completely
- 20+ years of sealant experience
- ARBOMaster approved applicator
- We’re fully insured
Take a look at our cost guide and what customers say.
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. In smaller Scottish places, parking is usually less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
How to prepare
- On commercial sites, let us know about site rules
- Let us know about parking restrictions
- Try not to wet indoor joints just before the visit
How to get a quote
If you are in Morebattle and need fire rated sealant, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.
Related advice
Aftercare tips
Good habits help new joints last longer. A few tips:
- Plan fire stopping into any work that goes through walls or floors
- Keep the record of products and locations with your fire safety documents
- Don’t paint over fire sealant until it has cured
- Flag any open gap you spot round a pipe or cable
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the list grows.
Nearby places to Morebattle
Other services in Morebattle
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
What sealant work can’t fix
Sealant is not the answer to every problem, and we’d rather say so up front. It will not solve:
- Openings too large for sealant, which need batts, boards or another system
- Issuing a fire rating or certificate for a building
- Construction that does not provide fire resistance on its own
If you’re not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer before you book.
Surfaces we seal
- Door frames
- Pipe & cable gaps
- Linear gaps
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry