Hampshire · England
Fire-rated sealant in Mockbeggar, Hampshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Mockbeggar, backed by a one-year guarantee. Call for a quick quote.
- Open gaps behind door architraves
- Gaps filled with a product that isn’t fire-rated
- Linear gaps at the head of walls
Commercial buildings in Mockbeggar
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of St Martins are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Mockbeggar is in Hampshire. From the centre of Mockbeggar to the outskirts, fire rated sealant is available for homes and businesses alike. Mockbeggar is one of 683 towns and villages in Hampshire we cover. Our Southampton page covers work nearby, about 17 miles away.
Here we cover the BH24 postcode area for fire rated sealant. Streets in the area include Gorley Road and New Road, and we cover them all. If you’re just outside Mockbeggar, we cover South Gorley (1 mile north), Ibsley (1 mile west), Rockford (1 mile south), Harbridge (1 mile west) and Ellingham (1 mile south-west). Larger places within reach include Totton (12 miles east), Lymington (13 miles south-east), Romsey (15 miles north-east), New Milton (10 miles south-east), Ringwood (3 miles south) and Barton on Sea (11 miles south-east).
Local landmarks in Mockbeggar
We work in homes and buildings around The Old Beams Inn and the streets around them. Well-known places in the area include Godshill Castle Hill (3.9 miles north) and Fordingbridge Doll Museum (2.8 miles north). Not far away are Linbrook Lake and Blashford Lakes.
How we handle fire rated sealant in Mockbeggar
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap. We work on service penetrations, pipe & cable gaps and door frames, and the jobs we see most are gaps around pipes and cables through fire-resisting walls and ordinary sealant used where a fire-rated product was needed.
For holiday lets, converted business premises or a community building near Mockbeggar, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Mockbeggar (BH24)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Other services in Mockbeggar
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- Big openings where sealant alone isn’t the tested solution
- Fire risk assessments, which need a qualified assessor
- Walls or floors that weren’t built to resist fire
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly.
Surfaces we seal
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Service penetrations
- Plasterboard & masonry
- Linear gaps
What affects the quote in Mockbeggar
Jobs vary more than people expect. The main factors:
- The number and length of the joints
- Whether the work is at height
- Which sealant suits the joint
- The number of rooms or windows
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, call 0345 464 0079 or email us for an honest opinion and a quote.
Asking for a quote
What to tell us when you ask for a quote:
- The problem you’ve noticed
- A few photos by email, if you can
- Any access issues, like height or stairs
- Any previous sealing or DIY work
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or drop us an email.
How the job changes by surface
Flats and HMOs
Working in occupied flats needs some planning. Access to flats and common areas is agreed in advance.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first so the seal has something sound to bond to.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
A DIY attempt does not rule out a professional job. We cut it out and start again.
Your questions about fire rated sealant in Mockbeggar
Is fire rated sealant in Mockbeggar guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Do you cover Mockbeggar for fire rated sealant?
Yes, Mockbeggar is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control and install to the manufacturer’s details.
Is standard sealant good enough for a fire gap?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. If it’s been used, we remove it and use the right product.
Do you work in flats, HMOs and commercial buildings?
Yes. Occupied flats, HMOs, offices and schools are all fine and we plan access around the people using them. Out-of-hours work can be arranged if that suits the building.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints.
What should I tell you?
The location, the problem and the rough size of the job. If you can, email a few photos.
Where are you based?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
How it works
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. For a village or hamlet like Mockbeggar, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Preparing for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Mention any tricky access
- For business premises, tell us about site rules or sign-in
Ask for a quote
For a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
Advice
Signs you need fire rated sealant in Mockbeggar
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Out of view, damage sits unnoticed until someone inspects.
People usually contact us after spotting something like this:
- Gaps flagged on a fire risk assessment
- Door frames with gaps between frame and wall
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps where pipes and cables go through a wall
Around Mockbeggar, as everywhere, fire rated sealant is only as good as the preparation behind it.
Before you book anyone
- Is VAT in the price?
- What preparation is included
- What the cure time is
- How much experience the applicator has
How to look after the new joints
Simple care keeps the joints in good condition. Our advice:
- Keep the record of products and locations with your fire safety documents
- Look in service cupboards and ceiling voids from time to time
- Report cracked or damaged seals as soon as you notice them
- Allow for resealing whenever new services are run
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the job gets bigger.