Surrey · England
Milford Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Milford, backed by a one-year guarantee. Call for a quick quote.
- Gaps around pipes and cables through fire-resisting walls
- Unsealed gaps around fire door frames
- Fire seals that have cracked with movement
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Sign-off of the building, which sits with building control or your assessor
- Fire doors that need new seals, closers or hardware
- Deciding what fire stopping a building needs
If in doubt, call 0345 464 0079 or email us and we will say what we think.
What we seal
- Linear gaps
- Pipe & cable gaps
- Door frames
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
Fire rated sealant for homes and businesses in Milford
We often work from an action list drawn up by a fire risk assessor on buildings across Milford. If you share the list, we can quote for the gaps that need fire-rated sealant. We are often asked to deal with gaps flagged on a fire risk assessment and linear gaps at the head of walls, on linear gaps, flats & HMOs and service penetrations.
Around a place like Milford, halls, schools and small businesses all have washrooms and kitchens used by many people. Sealant and fire-rated joints there matter as much as in any larger building.
Every job is covered by a 12-month guarantee, wherever you are in Surrey.
- Place
- Milford (GU8)
- Wider area
- Surrey
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
What affects the quote in Milford
We don’t publish a price list, because jobs vary so much. The quote depends on:
- The amount of work
- How many rooms, windows or areas are involved
- How easy the joints are to reach
- The type of sealant required
Leaving a failed joint generally makes the job bigger, not smaller. If you are not sure whether it needs doing, phone 0345 464 0079 or email us and we’ll give you an honest view and a quote.
What we need to know
When you call or email, these details help:
- Roughly how big the job is
- What’s wrong with the joints now
- Where the property is
- Pictures of the joints, sent by email
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and give you a clear price before we start.
Common problems we fix in Milford
Buildings are refitted and reconfigured over the years. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
Keep an eye out for these signs:
- Unsealed gaps where pipes and cables go through a wall
- Fire stopping disturbed by later work
- Gaps where walls meet ceilings or slabs
- Open gaps behind door architraves
Community buildings like St John the Evangelist's Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Before booking anyone
- What happens if they find a problem under the old sealant
- What the quote includes, VAT included or not
- Whether they seal over old material or remove it
- Are they insured?
Your questions about fire rated sealant in Milford
Do you cover smaller places like Milford?
Yes. Milford is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do fire rated sealant in Milford?
Yes, Milford is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Do you work in flats, HMOs and commercial buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Tell us how the building is used and we’ll plan around it.
Do you have insurance?
Yes. We’re fully insured, with over 20 years’ experience in sealant work.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We’ll tell you what we’re using and why.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Where are you based?
Mr Mastic is based in Crawley. We cover Milford and the rest of Surrey, along with the rest of our area.
Commercial buildings in Milford
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For site and facilities teams at buildings such as Milford School, gaps opened by contractors for new cabling are a common finding in schools and offices. Rented homes near Milford (Surrey) station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Milford is about 6 miles south-west of Guildford, in Surrey. Milford gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Across Surrey, we cover 395 places, Milford among them. Crawley is on our list too, about 20 miles from Milford.
Here we cover the GU8 postcode area for fire rated sealant. Whether your property is on Church Road, Upper Manor Road and Elmside or a nearby road, our applicators can take on the job. Other places close to Milford include Mousehill (1 mile south-west), Cramhurst (1 mile south), Upper Eashing (1 mile north), Ockford Ridge (1 mile south-east) and Lower Eashing (1 mile north). We also work in nearby towns such as Guildford (6 miles north-east), Woking (10 miles north), Camberley (12 miles north), Farnham (7 miles north-west), Dorking (14 miles east) and Frimley (10 miles north).
What’s near Milford
We work in homes and buildings around Rodborough, St Hilary's School and Rodborough Common and the streets around them. For rail, the closest station is Milford (Surrey) station, about 0.8 miles south-east. Well-known places in the area include Godalming Museum (1.7 miles north-east) and Milford Hospital (1 mile east). Not far away are Lower Lake and Frith Hill.
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
How it works
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes from a few hours to a few days, depending on the number of gaps and the access and we leave things clean and tidy. Parking around Milford is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Getting ready for the visit
- Mention any tricky access
- Move anything stored near the joints
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved and send you a clear quote.
Related advice
Why it’s worth doing now in Milford
Doing it once, properly, beats doing it twice. Work that does not follow the tested detail may have to come out again when the building is next checked. In an older home around Milford, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. We give a clear quote before any work starts.
What you get with us
- Any old sealant cut out fully, not covered over
- We leave the area clean and tidy
- Sanitary silicone with an anti-fungal additive in wet areas
- 20+ years of sealant experience
Take a look at how sealant jobs are priced or our reviews.