Surrey · England
Fire-rated sealant in Littleton, Surrey
Fire rated sealant for Littleton, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Ordinary sealant used where a fire-rated product was needed
- New service routes left unsealed after building work
- Unsealed gaps around fire door frames
Fire rated sealant in Littleton
Door frame gaps, linear joints and holes around services all have their own details. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. We are often asked to deal with unsealed gaps around fire door frames and gaps left after a refit or conversion, on door frames, service penetrations and plasterboard & masonry.
Work in a small place like Littleton is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
A one-year guarantee comes as standard, so you’re covered after we have gone.
- Place
- Littleton (TW17)
- Region
- Surrey
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What happens on the day
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on how much there is to do. In a small place like Littleton, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, phone 0345 464 0079 or email us.
Read more
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Honest limits
It helps to know what we cannot do too:
- Certifying a building or signing off its fire safety
- Openings too large for sealant, which need batts, boards or another system
- Assessing a building’s fire safety
If you’re not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Linear gaps
- Service penetrations
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Plasterboard & masonry
Littleton questions
Will you come out to Littleton?
Yes. Littleton is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you cover Littleton for fire rated sealant?
Yes, Littleton is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Is there any odour?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Where do you work from?
Our base is in Crawley, and we work across South East England, London and Scotland.
Are you fully insured?
Yes. We are fully insured for every job we do.
Can new sealant go over the old?
No, it won’t last. It may look fine at first, but the new layer lifts away from the old one. The old sealant has to come out completely.
Different surfaces, different methods
Door frames
Frame gaps are usually hidden behind the architrave. We seal any open gap to the product’s tested details.
Service penetrations
New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth with backing where the detail needs it.
Commercial buildings in Littleton
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Shepperton station, any gap left by new services in shared walls should be closed with a fire-rated product. Schools such as Littleton CofE Infant School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
Littleton is about 2 miles south of Ashford, in Surrey. If you need fire rated sealant in Littleton, it’s easy to get a quote: please ring 0345 464 0079 or email us. We cover Surrey from our Crawley base. Our Surrey coverage runs to 395 places, Littleton among them. You can also see our page for London, about 17 miles away.
Jobs for fire rated sealant in TW17 is quoted and booked the same way as anywhere else. If you need fire rated sealant at a property on Lion Close, Astleham Road and Korda Close or a nearby road, our applicators can take on the job. Close by, we work in Shepperton Green (1 mile south-east), Laleham (1 mile north-west), Charlton (1 mile east), Littleton Common (1 mile north-east) and Ashford (2 miles north). Larger places within reach include Guildford (12 miles south), Woking (8 miles south-west), Camberley (12 miles south-west), Epsom (10 miles south-east), Ewell (10 miles east) and Egham (4 miles north-west).
Around Littleton
We work in homes and buildings around Three Horse Shoes Public House, The Matthew Arnold School and Penton Park, among other places. For rail, the closest station is Shepperton station, about 1.2 miles south-east of the centre. Other landmarks nearby include Ashford Hospital (2.3 miles north) and Spelthorne Museum (2.6 miles north-west). For a walk, there’s St Ann's Hill and Kempton Park Reservoirs.
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Towns and villages near Littleton
What else we do in Littleton
Do you need fire rated sealant in Littleton?
Buildings are refitted and reconfigured over the years. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
The problems people generally mention when they call include:
- Open gaps behind door architraves
- Cracked or shrunken fire-rated sealant
- Gaps around pipes and cables through fire-resisting walls
- Holes left by a change of layout
For buildings such as Church of St Mary Magdalene, older buildings that have had new heating or wiring often have service gaps worth checking.
Before booking anyone
- When the joint can take water or movement
- Whether VAT is included
- How long the guarantee is
- Which sealant they’ll use, and why
How we quote for fire rated sealant
You’ll get a clear quote before any work starts. It’s based on:
- Which sealant suits the joint
- Whether the work is at height
- How many rooms, windows or areas are involved
- The number and length of the joints
The cost reflects the work involved, not guesswork. That’s why we ask a few questions first and agree the price before starting.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Where the job is, and your postcode
- Any access issues, like height or stairs
- If it’s domestic, commercial or a hotel
- The rough size of the job
Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or drop us an email with the details, and photos are welcome.