Surrey · England

Fire-rated sealant in Ashford, Surrey

Professional fire rated sealant in and around Ashford, with old sealant always removed completely and a 12-month guarantee.

  • Open gaps behind door architraves
  • Gaps flagged on a fire risk assessment
  • Unsealed gaps where pipes and cables go through a wall

Trusted fire rated sealant in Ashford

Fire rated sealant in Ashford

A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That detail is what we take care over, gap by gap. If you have gaps around pipes and cables through fire-resisting walls and damaged fire sealant left by other trades, we can put it right, whatever the surface.

For anyone managing a school, care home, pub or office in Ashford, washroom sealant, kitchen joints and fire-rated sealant around service openings all need upkeep. Out-of-hours working is possible to arrange.

Each job carries a 12-month guarantee.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Ashford (TW15, TW19, TW13)
Region
Surrey
Cover
One year on every job
Quotes
A clear quote up front
Phone
0345 464 0079
Page updated
26 October 2026

Keeping the joints in good condition

A little care helps the new joints last. Our advice:

  • Check whether a sealant can be painted before decorating over it
  • Ask every contractor to reseal any fire stopping they disturb
  • Look in service cupboards and ceiling voids from time to time
  • Get damaged fire seals looked at promptly

Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.

Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.

Why it’s worth doing now in Ashford

Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, and we work to the product details every time. In Ashford, as anywhere, most leaks start as a small gap in a joint, and early is when they’re cheapest and quickest to sort.

The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.

What you get with us

  • Over 20 years’ experience
  • 4.9 on Google from 180+ five-star reviews
  • Approved under the ARBOMaster scheme
  • Tidy, careful work

See how sealant jobs are priced and what customers say.

Workplaces and buildings in Ashford

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.

For site and facilities teams at buildings such as Spelthorne College, gaps opened by contractors for new cabling are a common finding in schools and offices. Rented homes near Ashford Surrey station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.

Ashford is about 6 miles south of Hayes, in Surrey. From the centre of Ashford to the outskirts, we cover fire rated sealant for every kind of property. We cover 395 towns and villages across Surrey, large and small. There’s also a page for London, roughly 17 miles from Ashford.

Jobs for fire rated sealant in TW15, TW19 and TW13 works the same way as everywhere else we cover. Whether your property is on Church Road, Station Road and London Road or a nearby road, our applicators can take on the job. Being close to the A30 and A308, Ashford is easy for our applicators to reach for fire rated sealant. Neighbouring places we cover for fire rated sealant include Littleton Common (1 mile south-east), Ashford Common (1 mile south-east), West Bedfont (1 mile north), Stanwell (2 miles north) and Hounslow (2 miles east). Larger places within reach include Guildford (14 miles south), Woking (9 miles south-west), Camberley (13 miles south-west), Epsom (11 miles south-east), Ewell (11 miles south-east) and Egham (4 miles west).

What’s near Ashford

We work in homes and buildings around Clarendon Primary School and Thomas Knyvett College, among other places. There’s a railway station in Ashford itself: Ashford Surrey station. Other landmarks nearby include Ashford Hospital (0.7 miles north) and Spelthorne Museum (2.2 miles west). Open spaces near Ashford include Staines Reservoirs and Kempton Park Reservoirs.

Map of Ashford © OpenStreetMap contributors

Quotes for fire rated sealant in Ashford

Your quote is based on your job. We look at:

  • Any working-time requirements on site
  • Whether the work is at height
  • Whether there’s mould to deal with
  • Whether old sealant or filler has to be cut out

No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference.

Asking for a quote

Before you ask for a quote, have a think about:

  • If it’s domestic, commercial or a hotel
  • Roughly how big the job is
  • The problem you’ve noticed
  • If someone has resealed it before

The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.

When it isn’t the sealant

A few problems are outside what sealant work can do:

  • Assessing a building’s fire safety
  • Issuing a fire rating or certificate for a building
  • Walls or floors that weren’t built to resist fire

If you’re not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before booking.

Joints and surfaces we work on

  • Service penetrations
  • Flats & HMOs
  • Pipe & cable gaps
  • Door frames
  • Plasterboard & masonry
  • Linear gaps

What happens on the day

All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours for a handful of gaps, and longer for a whole building. A visit in Ashford needs access to the work and a place to park close by. For outside work, let us know about side access, gates and any upper-floor joints.

  1. Before starting, we go through the specification or action list with you.
  2. We measure every gap and note what it’s in and what passes through.
  3. Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
  4. We fit backing where needed and apply the fire-rated sealant to depth.
  5. We hand over a list of locations and products for your files.

Before we arrive

  • Mention if the joints have been sealed before
  • Tell us about any water getting in
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

Need a quote? Please phone 0345 464 0079 or send us an email with a few details. We will explain what we’d do and give you a clear price before work begins.

Ask for a quote

Advice

FAQs for Ashford

What guarantee comes with fire rated sealant in Ashford?

Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.

Can you help a landlord with a rental near Ashford Surrey station?

Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or send us an email with the details for a clear quote.

Will you assess my building’s fire safety?

No, we don’t assess buildings. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.

What does intumescent mean?

Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant and which one is used depends on the job.

Is standard sealant good enough for a fire gap?

No. It looks sealed but will not perform as fire stopping. Use a product tested for that gap and service.

Where are you based?

Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.

Do you work in Ashford?

Yes. From our base in Crawley, we cover South East England, London and all of Scotland, and that includes Ashford.

How long does fire rated sealant take?

Most jobs take a few hours for a handful of gaps, and longer for a whole building, including preparation and clearing up. Your quote will say how long we expect yours to take.

For landlords and businesses

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

We also work for property managers and facilities teams. Several sites can go on one quote, and we’re fully insured.

Do you need fire rated sealant in Ashford?

Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole they leave doesn’t always get resealed.

If you can see any of these, it’s time to have the joints looked at:

  • Standard silicone or caulk in a fire-stopping gap
  • Gaps around pipes and cables through fire-resisting walls
  • Old fire sealant that has split or come away
  • Gaps left after a refit or conversion

Community buildings like Parish Church of St Matthew are part of the picture too: gaps around pipes and cables are worth checking after any building work there.

Before booking anyone

  • How the joint is cleaned and prepared
  • Who turns up on the day
  • The length of the guarantee
  • Which sealant they’ll use, and why

Choosing a sealant specialist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job