Kent · England

Fire Rated Sealant in Little Conghurst

Fire rated sealant across Little Conghurst and nearby, with every bit of old sealant taken out first and a one-year guarantee.

  • Unsealed gaps where pipes and cables go through a wall
  • Door frames with gaps between frame and wall
  • Damaged fire sealant left by other trades

Trusted fire rated sealant in Little Conghurst

What we are called out for in Little Conghurst

Lots of unsealed gaps appear long after the building was completed. New cables, pipes and data runs go through walls and ceilings and the hole they leave doesn’t always get resealed.

Keep an eye out for these signs:

  • New service routes left unsealed after building work
  • Open joints along the top of partitions
  • Door frames with gaps between frame and wall
  • Sealant items on a fire risk assessment action list

Schools such as Hawkhurst Church of England Primary School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.

What your quote should include

  • Are they insured?
  • Is the old sealant removed completely?
  • Who does the work, and how experienced they are
  • How hidden problems are handled

Choosing a sealant specialist

Fire rated sealant in Little Conghurst

Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. The right product depends on the gap size, the substrate and what passes through, so we work to the manufacturer’s details. We work on plasterboard & masonry, flats & HMOs and linear gaps, and the jobs we see most are fire seals that have cracked with movement and gaps around pipes and cables through fire-resisting walls.

If you have holiday lets, a converted barn used for business or a community building near Little Conghurst, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

Each job carries a 12-month guarantee.

The Mr Mastic team in navy uniforms in front of three Mr Mastic vans
Place
Little Conghurst (TN18)
Region
Kent
Cover
A year, on every job
Quotes
A clear quote up front
Call
0345 464 0079
Last updated
26 October 2026

Questions from Little Conghurst

Is Little Conghurst within the area you cover?

Yes, Little Conghurst is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Do you work for landlords with property near Etchingham station?

Yes, we work for landlords and agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.

What sealant do you use?

Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.

Will you assess my building’s fire safety?

No. We work from the specification you give us and install to the manufacturer’s details.

Are you ARBOMaster approved?

Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.

What does intumescent mean?

Intumescent means it swells when heated to help seal the gap. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.

Can you do several jobs on one visit?

Yes. Tell us about everything you’d like done.

Do you take out the old sealant first?

Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.

Can I do it myself?

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

What affects the cost of fire rated sealant

For a quick quote, just ask. The main things that affect it are:

  • Which sealant suits the joint
  • When we can work, for business premises
  • The number and length of the joints
  • Whether old sealant or filler has to be cut out

A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.

What we need to know

There’s no need for technical detail. It helps if you can tell us:

  • Whether it has been sealed before
  • Photos by email, if that is easy
  • Roughly how big the job is
  • Any access issues, like height or stairs

To get a quote, ring 0345 464 0079 or send us an email with the location and a short description of the problem. We will give you a clear quote before any work starts.

When something else is needed

We will always be straight with you, so here’s what sealant can’t fix:

  • Openings too large for sealant, which need batts, boards or another system
  • Sign-off of the building, which sits with building control or your assessor
  • Doors that aren’t fire doors in the first place

If in doubt, ring 0345 464 0079 or drop us an email and we will say what we think before you book.

Joints and surfaces we work on

  • Pipe & cable gaps
  • Door frames
  • Service penetrations
  • Plasterboard & masonry
  • Linear gaps
  • Flats & HMOs

Why deal with it now?

Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Older cottages and farmhouses around Little Conghurst can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.

Why book with us

  • Rated 4.9 stars on Google
  • Homes, businesses and hotels
  • Full insurance on every job
  • Sanitary silicone with an anti-fungal additive in wet areas

Read what affects the cost and what customers say.

Fire rated sealant in Little Conghurst: local notes

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details. Little Conghurst has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed.

Community buildings like Church of All Saints are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. If you let a flat or house near Etchingham station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.

Little Conghurst is about 12 miles north of Hastings, in Kent. For fire rated sealant in and around Little Conghurst, please call 0345 464 0079 or email us for a quick quote. We cover Kent from our Crawley base. Little Conghurst is one of 922 towns and villages in Kent where we work. Crawley is on our list too, about 32 miles from Little Conghurst.

Jobs for fire rated sealant in TN18 works the same way as everywhere else we cover. Nearby, we also carry out fire rated sealant in Four Throws (1 mile north-east), Pipsden (1 mile north), The Moor (1 mile west), Hawkhurst (1 mile north-west) and Sandhurst Cross (1 mile south-east). We also work in nearby towns such as Royal Tunbridge Wells (13 miles north-west), Paddock Wood (11 miles north-west), Tenterden (8 miles east), Southborough (14 miles north-west), Park Wood (14 miles north) and Staplehurst (9 miles north).

Around Little Conghurst

Around Little Conghurst, our work takes us to homes and buildings near Marlborough House School, Collingwood Nature Reserve and Oak And Ivy Public House and the streets around them. The nearest railway station is Etchingham station, about 4.1 miles south-west of the centre. Well-known places in the area include Benenden Hospital (5.3 miles north-east).

Map of Little Conghurst © OpenStreetMap contributors

What happens on the day

A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. It generally takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Little Conghurst, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.

  1. Access to each area is agreed so the work can run in order.
  2. Old, damaged or unsuitable sealant is removed.
  3. Gaps are cleaned of dust and loose material.
  4. The fire-rated or intumescent sealant is applied and tooled to the tested detail.
  5. Locations and products are written up and any gaps unsuitable for sealant are flagged.

Getting ready for the visit

  • Mention if the joints have been sealed before
  • Tell us about any water getting in
  • Move anything stored near the joints

Ask for a quote

If you’re in Little Conghurst and need fire rated sealant, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and you’ll get a clear quote before work begins.

Get a quick quote

Related advice

Surface by surface

Plasterboard walls

Service holes in plasterboard are often rough and oversized. Where a hole is bigger than the sealant’s tested range, it needs another approach.

Service penetrations

Service penetrations are where new gaps often appear. Old or unsuitable filler comes out before the right sealant goes in with backing where the detail needs it.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job